修改端点

rk3588/.dr4-rk3588.dtb.cmd

@@ -33,10 +33,9 @@ deps_arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb := \
   arch/arm64/boot/dts/rockchip/rk3588/../rk3588-rk806-single.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/../rk3588-linux.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rpdzkj_config.dtsi \
-  arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi \
+  arch/arm64/boot/dts/rockchip/rk3588/zkzg-mipi.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac0.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi \
-  arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi \
 
 arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb: $(deps_arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb)
 

rk3588/.dr4-rk3588.dtb.d.pre.tmp

@@ -29,7 +29,6 @@ dr4-rk3588.o: arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts \
  arch/arm64/boot/dts/rockchip/rk3588/../rk3588-rk806-single.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/../rk3588-linux.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/rpdzkj_config.dtsi \
- arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi \
+ arch/arm64/boot/dts/rockchip/rk3588/zkzg-mipi.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac0.dtsi \
- arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi \
- arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi
+ arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi

rk3588/.dr4-rk3588.dtb.dts.tmp

@@ -1,6 +1,6 @@
-# 0 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
-# 0 "<built-in>"
-# 0 "<command-line>"
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+# 1 "<built-in>"
+# 1 "<command-line>"
 # 1 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
 
 
@@ -10674,7 +10674,7 @@
   };
  };
 };
-# 6888 "arch/arm64/boot/dts/rockchip/rk3588/../rk3588s.dtsi" 2
+# 6887 "arch/arm64/boot/dts/rockchip/rk3588/../rk3588s.dtsi" 2
 # 8 "arch/arm64/boot/dts/rockchip/rk3588/../rk3588.dtsi" 2
 # 1 "arch/arm64/boot/dts/rockchip/rk3588/../rk3588-vccio3-pinctrl.dtsi" 1
 
@@ -14545,55 +14545,144 @@
 
 
 
-# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi" 1
 
-&u2phy2 {
-    status = "okay";
+
+
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/zkzg-mipi.dtsi" 1
+
+
+
+
+
+
+&mipi_dcphy0 {
+ status = "okay";
 };
 
-&u2phy3 {
-    status = "okay";
+&csi2_dcphy0 {
+ status = "okay";
+
+ ports {
+  #address-cells = <1>;
+  #size-cells = <0>;
+  port@0 {
+   reg = <0>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   mipidcphy0_in_ucam0: endpoint@0 {
+    reg = <0>;
+    remote-endpoint = <&mvcam_out4>;
+
+    data-lanes = <1 2 3 4>;
+   };
+  };
+
+  port@1 {
+   reg = <1>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   csidcphy0_out: endpoint@0 {
+    reg = <0>;
+    remote-endpoint = <&mipi0_csi2_input>;
+   };
+  };
+ };
 };
 
+&i2c7 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7m0_xfer>;
 
+ mvcam_4: mvcam@3b{
+  status = "okay";
+  compatible = "veye,mvcam";
+  reg = <0x3b>;
 
+  pwdn-gpios = <&gpio1 5 0>;
 
+  reset-gpios = <&gpio1 3 1>;
+  rockchip,camera-module-index = <0>;
+  rockchip,camera-module-facing = "back";
+  rockchip,camera-module-name = "NC";
+  rockchip,camera-module-lens-name = "NC";
+  port {
+   mvcam_out4: endpoint {
+    remote-endpoint = <&mipidcphy0_in_ucam0>;
 
-&u2phy2_host {
-    status = "okay";
+    data-lanes = <1 2 3 4>;
+   };
+  };
+ };
 };
 
-&u2phy3_host {
-    status = "okay";
+&mipi0_csi2 {
+ status = "okay";
+
+ ports {
+  #address-cells = <1>;
+  #size-cells = <0>;
+
+  port@0 {
+   reg = <0>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   mipi0_csi2_input: endpoint@1 {
+    reg = <1>;
+    remote-endpoint = <&csidcphy0_out>;
+   };
+  };
+
+  port@1 {
+   reg = <1>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   mipi0_csi2_output: endpoint@0 {
+    reg = <0>;
+    remote-endpoint = <&cif_mipi_in0>;
+   };
+  };
+ };
 };
 
-&usb_host0_ehci {
-    status = "okay";
+&rkcif_mipi_lvds {
+ status = "okay";
+
+ port {
+  cif_mipi_in0: endpoint {
+   remote-endpoint = <&mipi0_csi2_output>;
+  };
+ };
 };
 
-&usb_host0_ohci {
-    status = "okay";
+&rkcif_mipi_lvds_sditf {
+ status = "disabled";
+
+ port {
+  mipi_lvds_sditf: endpoint {
+   remote-endpoint = <&isp1_in1>;
+  };
+ };
 };
 
-&usb_host1_ehci {
-    status = "okay";
+&rkisp1_vir0 {
+ status = "disabled";
+
+ port {
+  #address-cells = <1>;
+  #size-cells = <0>;
+
+  isp1_in1: endpoint@0 {
+   reg = <0>;
+   remote-endpoint = <&mipi_lvds_sditf>;
+  };
+ };
 };
-
-&usb_host1_ohci {
-    status = "okay";
-};
-
-
-
-
-&usbhost3_0 {
-    status = "disabled";
-};
-
-&usbhost_dwc3_0 {
-    status = "disabled";
-};
-# 13 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 16 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 
 
 
@@ -14611,7 +14700,7 @@
     phy-mode = "rgmii-rxid";
     clock_in_out = "input";
 
-    snps,reset-gpio = <&gpio2 20 1>;
+    snps,reset-gpio = <&gpio3 15 1>;
     snps,reset-active-low;
 
     snps,reset-delays-us = <0 20000 100000>;
@@ -14622,8 +14711,8 @@
              &gmac0_rx_bus2
              &gmac0_rgmii_clk
              &gmac0_rgmii_bus
-             &gmac0_clkinout
-             &eth0_pins>;
+            &gmac0_clkinout
+            &eth0_pins>;
 
     tx_delay = <0x44>;
 
@@ -14631,7 +14720,7 @@
     phy-handle = <&rgmii_phy0>;
     status = "okay";
 };
-# 17 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 20 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 # 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi" 1
 
 &mdio1 {
@@ -14647,7 +14736,7 @@
     phy-mode = "rgmii-rxid";
     clock_in_out = "input";
 
-    snps,reset-gpio = <&gpio3 15 1>;
+    snps,reset-gpio = <&gpio2 20 1>;
     snps,reset-active-low;
 
     snps,reset-delays-us = <0 20000 100000>;
@@ -14658,56 +14747,17 @@
              &gmac1_rx_bus2
              &gmac1_rgmii_clk
              &gmac1_rgmii_bus
-            &gmac1_clkinout
-            &eth1_pins>;
+            &gmac1_clkinout>;
+
 
     tx_delay = <0x44>;
 
 
     phy-handle = <&rgmii_phy1>;
     status = "okay";
-};
-# 18 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
-
-
-# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi" 1
-
-/ {
-        pcie20_avdd0v85: pcie20-avdd0v85 {
-                compatible = "regulator-fixed";
-                regulator-name = "pcie20_avdd0v85";
-                regulator-boot-on;
-                regulator-always-on;
-                regulator-min-microvolt = <850000>;
-                regulator-max-microvolt = <850000>;
-                vin-supply = <&vdd_0v85_s0>;
-        };
-
-        pcie20_avdd1v8: pcie20-avdd1v8 {
-                compatible = "regulator-fixed";
-                regulator-name = "pcie20_avdd1v8";
-                regulator-boot-on;
-                regulator-always-on;
-                regulator-min-microvolt = <1800000>;
-                regulator-max-microvolt = <1800000>;
-                vin-supply = <&avcc_1v8_s0>;
-        };
-
-        vcc3v3_pcie30: vcc3v3-pcie30 {
-                compatible = "regulator-fixed";
-                regulator-name = "vcc3v3_pcie30";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-                enable-active-high;
-                gpios = <&gpio4 5 0>;
-                startup-delay-us = <5000>;
-                vin-supply = <&vcc12v_dcin>;
-        };
-
-
 };
 # 21 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
-# 90 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+# 93 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
 / {
     model = "dr4-rk3588";
 
@@ -14736,14 +14786,14 @@
             thermal-zone = "soc-thermal";
             threshold-temp = <60000>;
             running-time = <10000>;
-            status = "disable";
+            status = "disabled";
         };
 
         rp_power{
                 status = "okay";
                 compatible = "rp_power";
                 rp_not_deep_sleep = <1>;
-# 142 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+# 145 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
                 usb-host-power {
                         gpio_num = <&gpio2 17 0>;
                         gpio_function = <4>;
@@ -14754,13 +14804,74 @@
 
 
     };
-# 162 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+
+        rp_gpio{
+                status = "disabled";
+                compatible = "rp_gpio";
+
+                gpio3c7 {
+                        gpio_num = <&gpio3 23 0>;
+                        gpio_function = <0>;
+                };
+        };
+};
+
+&uart1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m1_xfer>;
+ fifo-depth =<4096>;
+ rx-fifo-depth =<2048>;
+ tx-fifo-depth =<2048>;
+  dma-names = "tx", "rx";
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m0_xfer>;
+ fifo-depth =<4096>;
+ rx-fifo-depth =<2048>;
+ tx-fifo-depth =<2048>;
+  dma-names = "tx", "rx";
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m1_xfer>;
+ fifo-depth =<4096>;
+ rx-fifo-depth =<2048>;
+ tx-fifo-depth =<2048>;
+  dma-names = "tx", "rx";
+
+};
+
+&uart5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5m0_xfer>;
+ fifo-depth =<4096>;
+ rx-fifo-depth =<2048>;
+ tx-fifo-depth =<2048>;
+  dma-names = "tx", "rx";
+
+};
+
+&uart6 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6m1_xfer>;
+ fifo-depth =<4096>;
+ rx-fifo-depth =<2048>;
+ tx-fifo-depth =<2048>;
+ dma-names = "tx", "rx";
 };
 
 &uart7 {
  status = "okay";
  pinctrl-names = "default";
- pinctrl-0 = <&uart7m1_xfer>;
+ pinctrl-0 = <&uart7m0_xfer>;
  fifo-depth =<4096>;
  rx-fifo-depth =<2048>;
  tx-fifo-depth =<2048>;
@@ -14768,7 +14879,7 @@
 };
 
 &uart8 {
- status = "okay";
+ status = "disabled";
  pinctrl-names = "default";
  pinctrl-0 = <&uart8m0_xfer>;
  fifo-depth =<4096>;
@@ -14777,26 +14888,29 @@
  dma-names = "tx", "rx";
 };
 
-
-&can0 {
- assigned-clocks = <&cru 112>;
- assigned-clock-rates = <200000000>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&can0m0_pins>;
-
-};
-
 &can1 {
  assigned-clocks = <&cru 114>;
  assigned-clock-rates = <200000000>;
- status = "okay";
+ status = "disabled";
  pinctrl-names = "default";
  pinctrl-0 = <&can1m1_pins>;
 };
-# 225 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+
+&spi3 {
+    status = "disabled";
+    pinctrl-0 = <&spi3m1_pins &spi3m1_cs1>;
+
+    spi3_dev@0 {
+        compatible = "rockchip,spidev";
+        reg = <0>;
+        spi-max-frequency = <12000000>;
+        spi-lsb-first;
+    };
+};
+
+
 &i2c4 {
-    status = "disable";
+    status = "disabled";
     pinctrl-names = "default";
     pinctrl-0 = <&i2c4m1_xfer>;
 
@@ -14815,7 +14929,6 @@
 
 };
 
-
 &sdmmc {
     status = "disabled";
 };
@@ -14823,3 +14936,60 @@
 &fiq_debugger {
     rockchip,baudrate = <115200>;
 };
+
+&display_subsystem {
+    clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
+    clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
+};
+
+&hdptxphy_hdmi_clk0 {
+            status = "disabled";
+};
+
+&hdptxphy_hdmi_clk1 {
+            status = "disabled";
+};
+
+&pwm14 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm14m1_pins>;
+    #pwm-cells = <3>;
+};
+
+&pwm15 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm15m1_pins>;
+    #pwm-cells = <3>;
+};
+
+&pwm11 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm11m1_pins>;
+    #pwm-cells = <3>;
+};
+
+&pwm13 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm13m1_pins>;
+    #pwm-cells = <3>;
+};
+
+&i2c1 {
+  status = "okay";
+  pinctrl-names = "default";
+  pinctrl-0 = <&i2c1m2_xfer>;
+};
+
+&i2c2 {
+  status = "okay";
+  pinctrl-names = "default";
+  pinctrl-0 = <&i2c2m3_xfer>;
+};

rk3588/dr4-rk3588.dts

@@ -9,7 +9,10 @@
 
 /* usb */
 // #include "rp-usb-typec-rk3588.dtsi"
-#include "rp-usb-host.dtsi"
+// #include "rp-usb-host.dtsi"
+
+/* mipi */
+#include "zkzg_mipi.dtsi"
 
 /* ethernet */
 // #include "rp-eth-pcie2gmac-rk3588.dtsi"
@@ -17,7 +20,7 @@
 #include "rp-eth-gmac1.dtsi"
 
 /* pcie */
-#include "rp-pcie-power-rk3588.dtsi"
+// #include "rp-pcie-power-rk3588.dtsi"
 // #include "rp-pcie3.dtsi" //need comment when use board of  make it youself,and remove the pcie function
 // #include "rp-pcie-5g.dtsi"
 
@@ -60,8 +63,8 @@
 //#include "rp-camera-dphy0-imx415.dtsi"
 /******************************************/
 
-//#include "rp-lcd-hdmi0.dtsi"        //batch ignore
-//#include "rp-lcd-hdmi1.dtsi"        //batch ignore
+// #include "rp-lcd-hdmi0.dtsi"        //batch ignore
+// #include "rp-lcd-hdmi1.dtsi"        //batch ignore
 //#include "rp-lcd-typec-dp0.dtsi"    //usb edp0, must be enable rp-usb-typec.dtsi, batch ignore 
 // #include "rp-lcd-multi-hdmi0-hdmi1-dp0.dtsi"
 
@@ -115,7 +118,7 @@
             thermal-zone = "soc-thermal";
             threshold-temp = <60000>; //60C
             running-time = <10000>; //10s
-            status = "disable";
+            status = "disabled";
         };
 
         rp_power{
@@ -150,21 +153,73 @@
                 // };
     };
 
-        // rp_gpio{
-        //         status = "okay";
-        //         compatible = "rp_gpio";
+        rp_gpio{
+                status = "disabled";
+                compatible = "rp_gpio";
 
-        //         gpio3c7 {
-        //                 gpio_num = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
-        //                 gpio_function = <0>;
-        //         };
-        // };
+                gpio3c7 {
+                        gpio_num = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+                        gpio_function = <0>;
+                };
+        };
+};
+
+&uart1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m1_xfer>;
+	fifo-depth =<4096>;	
+	rx-fifo-depth =<2048>;
+	tx-fifo-depth =<2048>;
+		dma-names = "tx", "rx";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m0_xfer>;
+	fifo-depth =<4096>;	
+	rx-fifo-depth =<2048>;
+	tx-fifo-depth =<2048>;
+		dma-names = "tx", "rx";
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m1_xfer>;
+	fifo-depth =<4096>;	
+	rx-fifo-depth =<2048>;
+	tx-fifo-depth =<2048>;
+		dma-names = "tx", "rx";
+	
+};
+
+&uart5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5m0_xfer>;
+	fifo-depth =<4096>;	
+	rx-fifo-depth =<2048>;
+	tx-fifo-depth =<2048>;
+		dma-names = "tx", "rx";
+	
+};
+
+&uart6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer>;
+	fifo-depth =<4096>;	
+	rx-fifo-depth =<2048>;
+	tx-fifo-depth =<2048>;
+	dma-names = "tx", "rx";
 };
 
 &uart7 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7m1_xfer>;
+	pinctrl-0 = <&uart7m0_xfer>;
 	fifo-depth =<4096>;	
 	rx-fifo-depth =<2048>;
 	tx-fifo-depth =<2048>;
@@ -172,7 +227,7 @@
 };
 
 &uart8 {
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8m0_xfer>;
 	fifo-depth =<4096>;	
@@ -181,49 +236,29 @@
 	dma-names = "tx", "rx";
 };
 
-
-&can0 {
-	assigned-clocks = <&cru CLK_CAN0>;
-	assigned-clock-rates = <200000000>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0m0_pins>;
-	
-};
-
 &can1 {
 	assigned-clocks = <&cru CLK_CAN1>;
 	assigned-clock-rates = <200000000>;
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&can1m1_pins>;
 }; 
 
-// &can2 {
-// 	assigned-clocks = <&cru CLK_CAN2>;
-// 	assigned-clock-rates = <200000000>;
-// 	status = "okay";
-// 	pinctrl-names = "default";
-// 	pinctrl-0 = <&can2m1_pins>;
-// }; 
+&spi3 {
+    status = "disabled";
+    pinctrl-0 = <&spi3m1_pins &spi3m1_cs1>;
     
-// &spi3 {
-//         // status = "disabled";
-//         status = "okay";
-//         max-freq = <48000000>;
-//         dev-port = <1>;
-//         pinctrl-0 = <&spi3m1_cs1 &spi3m1_pins>;
-//         spidev0: spidev@00 {
-//             status = "okay";
-//             compatible = "rockchip,spidev";
-//             reg = <0x00>;
-//             spi-max-frequency = <48000000>;
-//         };
-// };
+    spi3_dev@0 {
+        compatible = "rockchip,spidev";
+        reg = <0>;
+        spi-max-frequency = <12000000>;
+        spi-lsb-first;
+    };
+};
 
 
 &i2c4 {
-    status = "disable";
+    status = "disabled";
     pinctrl-names = "default";
     pinctrl-0 = <&i2c4m1_xfer>;
 
@@ -242,7 +277,6 @@
 
 };
 
-
 &sdmmc {
     status = "disabled";
 };
@@ -251,15 +285,59 @@
     rockchip,baudrate = <115200>;
 };
 
-// &display_subsystem {
-// clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
-// clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
-// };
+&display_subsystem {
+    clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
+    clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
+};
 
-// &hdptxphy_hdmi_clk0 {
-//             status = "okay";
-// };
+&hdptxphy_hdmi_clk0 {
+            status = "disabled";
+};
 
-// &hdptxphy_hdmi_clk1 {
-//             status = "okay";
-// };
+&hdptxphy_hdmi_clk1 {
+            status = "disabled";
+};
+
+&pwm14 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm14m1_pins>;  // 选择 PWM1 的引脚复用
+    #pwm-cells = <3>;
+};
+
+&pwm15 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm15m1_pins>;  // 选择 PWM1 的引脚复用
+    #pwm-cells = <3>;
+};
+
+&pwm11 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm11m1_pins>; 
+    #pwm-cells = <3>;
+};
+
+&pwm13 {
+    status = "okay";
+    compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+    pinctrl-names = "active";
+    pinctrl-0 = <&pwm13m1_pins>; 
+    #pwm-cells = <3>;
+};
+
+&i2c1 {
+  status = "okay";                    // 启用 I2C1 总线
+  pinctrl-names = "default";          // 引脚控制状态名称
+  pinctrl-0 = <&i2c1m2_xfer>;         // 使用 i2c1m2_xfer 引脚配置
+};
+
+&i2c2 {
+  status = "okay";                    // 启用 I2C2 总线
+  pinctrl-names = "default";          // 引脚控制状态名称
+  pinctrl-0 = <&i2c2m3_xfer>;         // 使用 i2c2m3_xfer 引脚配置
+};

rk3588/rp-eth-gmac0.dtsi

@@ -11,7 +11,7 @@
     phy-mode = "rgmii-rxid";
     clock_in_out = "input";
 
-    snps,reset-gpio = <&gpio2 RK_PC4 GPIO_ACTIVE_LOW>;
+    snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
     snps,reset-active-low;
     // Reset time is 20ms, 100ms for rtl8211f 
     snps,reset-delays-us = <0 20000 100000>;
@@ -22,8 +22,8 @@
              &gmac0_rx_bus2
              &gmac0_rgmii_clk
              &gmac0_rgmii_bus
-             &gmac0_clkinout
-             &eth0_pins>;
+            &gmac0_clkinout
+            &eth0_pins>;
 
     tx_delay = <0x44>;
     // rx_delay = <0x4f>; 

rk3588/rp-eth-gmac1.dtsi

@@ -12,7 +12,7 @@
     phy-mode = "rgmii-rxid";
     clock_in_out = "input";
 
-    snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+    snps,reset-gpio = <&gpio2 RK_PC4 GPIO_ACTIVE_LOW>;
     snps,reset-active-low;
     // Reset time is 20ms, 100ms for rtl8211f 
     snps,reset-delays-us = <0 20000 100000>;
@@ -23,8 +23,8 @@
              &gmac1_rx_bus2
              &gmac1_rgmii_clk
              &gmac1_rgmii_bus
-            &gmac1_clkinout
-            &eth1_pins>;
+            &gmac1_clkinout>;
+            // &eth1_pins>;
 
     tx_delay = <0x44>;
     // rx_delay = <0x4f>;

rk3588/rp-usb-host.dtsi

@@ -39,10 +39,27 @@
 
 
 &usbhost3_0 {
-    status = "disabled";
+    status = "okay";
 };
 
 &usbhost_dwc3_0 {
-    status = "disabled";
+    status = "okay";
 };
 
+&usbdrd_dwc3_0 {
+     extcon=<&u2phy0>;
+     status="okay";
+};
+  
+&u2phy0 {
+     status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+     extcon=<&u2phy1>;
+     status="okay";
+};
+  
+&u2phy1 {
+     status = "okay";
+};

rk3588/zkzg-mipi.dtsi

@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+&mipi_dcphy0 {
+	status = "okay";
+};
+
+&csi2_dcphy0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipidcphy0_in_ucam0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mvcam_out4>;
+				// 修改为 4 lane
+				data-lanes = <1 2 3 4>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csidcphy0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi0_csi2_input>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+
+	mvcam_4: mvcam@3b{
+		status = "okay";
+		compatible = "veye,mvcam";
+		reg = <0x3b>;
+		// 电源控制引脚
+		pwdn-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>;
+		// 新增复位引脚
+		reset-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>;
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "NC";
+		rockchip,camera-module-lens-name = "NC";
+		port {
+			mvcam_out4: endpoint {
+				remote-endpoint = <&mipidcphy0_in_ucam0>;
+				// 修改为 4 lane
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&mipi0_csi2 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi0_csi2_input: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&csidcphy0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi0_csi2_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&cif_mipi_in0>;
+			};
+		};
+	};
+};
+
+&rkcif_mipi_lvds {
+	status = "okay";
+
+	port {
+		cif_mipi_in0: endpoint {
+			remote-endpoint = <&mipi0_csi2_output>;
+		};
+	};
+};
+
+&rkcif_mipi_lvds_sditf {
+	status = "disabled";
+
+	port {
+		mipi_lvds_sditf: endpoint {
+			remote-endpoint = <&isp1_in1>;
+		};
+	};
+};
+
+&rkisp1_vir0 {
+	status = "disabled";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		isp1_in1: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&mipi_lvds_sditf>;
+		};
+	};
+};

rk3588/zkzg_mipi.dtsi

@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+&csi2_dcphy0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipidcphy0_in_ucam0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mvcam_out4>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csidcphy0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi0_csi2_input>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+
+	mvcam_4: mvcam@3b{
+		status = "okay";
+        compatible = "veye,mvcam";
+        reg = <0x3b>;
+		clocks = <&cru CLK_MIPI_CAMARAOUT_M2>;
+		clock-names = "xvclk";
+		power-domains = <&power RK3588_PD_VI>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipim0_camera2_clk>;
+		rockchip,grf = <&sys_grf>;
+		reset-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>;
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "NC";
+		rockchip,camera-module-lens-name = "NC";
+		port {
+			mvcam_out4: endpoint {
+				remote-endpoint = <&mipidcphy0_in_ucam0>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&mipi_dcphy0 {
+	status = "okay";
+};
+
+&mipi0_csi2 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// 修正这里：endpoint@0 和 reg = <0>
+			mipi0_csi2_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&csidcphy0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi0_csi2_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&cif_mipi_in0>;
+			};
+		};
+	};
+};
+
+&rkcif {
+	status = "okay";
+};
+
+&rkcif_mmu {
+	status = "okay";
+};
+
+&rkcif_mipi_lvds {
+	status = "okay";
+
+	port {
+		cif_mipi_in0: endpoint {
+			remote-endpoint = <&mipi0_csi2_output>;
+		};
+	};
+};
+
+// 以下ISP相关配置可以保持disabled，先确保基础链路通
+&rkcif_mipi_lvds_sditf {
+	status = "disabled";
+};
+
+&rkisp1_vir0 {
+	status = "disabled";
+};