rockchip
This commit is contained in:
zhangpeng
746
rk3588-vehicle-evb-maxim-max96722-dphy0.dtsi
Normal file
746
rk3588-vehicle-evb-maxim-max96722-dphy0.dtsi
Normal file
@@ -0,0 +1,746 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
#include <dt-bindings/display/media-bus-format.h>
|
||||
|
||||
/ {
|
||||
max96722_dphy0_osc0: max96722-dphy0-oscillator@0 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <1>;
|
||||
clock-frequency = <25000000>;
|
||||
clock-output-names = "max96722-dphy0-osc0";
|
||||
};
|
||||
|
||||
max96722_dphy0_vcc1v2: max96722-dphy0-vcc1v2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "max96722_dphy0_vcc1v2";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
startup-delay-us = <850>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
max96722_dphy0_vcc1v8: max96722-dphy0-vcc1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "max96722_dphy0_vcc1v8";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
startup-delay-us = <200>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
max96722_dphy0_poc: max96722-dphy0-poc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "max96722_dphy0_poc";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <1050>;
|
||||
off-on-delay-us = <515000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&csi2_dphy0_hw {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&csi2_dphy0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_dphy0_in_max96722: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&max96722_dphy0_out>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csidphy0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&mipi2_csi2_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7m3_xfer>;
|
||||
|
||||
max96722_dphy0: max96722@29 {
|
||||
compatible = "maxim4c,max96722";
|
||||
status = "okay";
|
||||
reg = <0x29>;
|
||||
clock-names = "xvclk";
|
||||
clocks = <&max96722_dphy0_osc0 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&max96722_dphy0_pwdn>, <&max96722_dphy0_errb>, <&max96722_dphy0_lock>;
|
||||
power-domains = <&power RK3588_PD_VI>;
|
||||
rockchip,grf = <&sys_grf>;
|
||||
pwdn-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
lock-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
vcc1v2-supply = <&max96722_dphy0_vcc1v2>;
|
||||
vcc1v8-supply = <&max96722_dphy0_vcc1v8>;
|
||||
poc-supply = <&max96722_dphy0_poc>;
|
||||
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "max96722";
|
||||
rockchip,camera-module-lens-name = "max96722";
|
||||
|
||||
port {
|
||||
max96722_dphy0_out: endpoint {
|
||||
remote-endpoint = <&mipi_dphy0_in_max96722>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
|
||||
/* support mode config start */
|
||||
support-mode-config {
|
||||
status = "okay";
|
||||
|
||||
bus-format = <MEDIA_BUS_FMT_UYVY8_2X8>;
|
||||
sensor-width = <1280>;
|
||||
sensor-height = <800>;
|
||||
max-fps-numerator = <10000>;
|
||||
max-fps-denominator = <300000>;
|
||||
bpp = <16>;
|
||||
link-freq-idx = <20>;
|
||||
vc-array = <0x10 0x20 0x40 0x80>; // VC0~3: bit4~7
|
||||
};
|
||||
/* support mode config end */
|
||||
|
||||
/* serdes local device start */
|
||||
serdes-local-device {
|
||||
status = "okay";
|
||||
|
||||
/* GMSL LINK config start */
|
||||
gmsl-links {
|
||||
status = "okay";
|
||||
|
||||
link-vdd-ldo1-en = <1>;
|
||||
link-vdd-ldo2-en = <1>;
|
||||
|
||||
// Link A: link-id = 0
|
||||
gmsl-link-config-0 {
|
||||
status = "okay";
|
||||
link-id = <0>; // Link ID: 0/1/2/3
|
||||
|
||||
link-type = <0>;
|
||||
link-rx-rate = <0>;
|
||||
link-tx-rate = <0>;
|
||||
|
||||
port {
|
||||
max96722_dphy0_link0_in: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_remote0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
link-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
14 D1 03 00 00 // VGAHiGain
|
||||
14 45 00 00 00 // Disable SSC
|
||||
0B 06 ef 00 00 // HIM on
|
||||
0B 07 84 00 00 // Enable HVEN and DBL
|
||||
0B 0F 01 00 00 // Disable processing DE signals
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Link B: link-id = 1
|
||||
gmsl-link-config-1 {
|
||||
status = "okay";
|
||||
link-id = <1>; // Link ID: 0/1/2/3
|
||||
|
||||
link-type = <0>;
|
||||
link-rx-rate = <0>;
|
||||
link-tx-rate = <0>;
|
||||
|
||||
port {
|
||||
max96722_dphy0_link1_in: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_remote1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
link-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
15 D1 03 00 00 // VGAHiGain
|
||||
15 45 00 00 00 // Disable SSC
|
||||
0C 06 ef 00 00 // HIM on
|
||||
0C 07 84 00 00 // Enable HVEN and DBL
|
||||
0C 0F 01 00 00 // Disable processing DE signals
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Link C: link-id = 2
|
||||
gmsl-link-config-2 {
|
||||
status = "okay";
|
||||
link-id = <2>; // Link ID: 0/1/2/3
|
||||
|
||||
link-type = <0>;
|
||||
link-rx-rate = <0>;
|
||||
link-tx-rate = <0>;
|
||||
|
||||
port {
|
||||
max96722_dphy0_link2_in: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_remote2_out>;
|
||||
};
|
||||
};
|
||||
|
||||
link-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
16 D1 03 00 00 // VGAHiGain
|
||||
16 45 00 00 00 // Disable SSC
|
||||
0D 06 ef 00 00 // HIM on
|
||||
0D 07 84 00 00 // Enable HVEN and DBL
|
||||
0D 0F 01 00 00 // Disable processing DE signals
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Link D: link-id = 3
|
||||
gmsl-link-config-3 {
|
||||
status = "okay";
|
||||
link-id = <3>; // Link ID: 0/1/2/3
|
||||
|
||||
link-type = <0>;
|
||||
link-rx-rate = <0>;
|
||||
link-tx-rate = <0>;
|
||||
|
||||
port {
|
||||
max96722_dphy0_link3_in: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_remote3_out>;
|
||||
};
|
||||
};
|
||||
|
||||
link-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
17 D1 03 00 00 // VGAHiGain
|
||||
17 45 00 00 00 // Disable SSC
|
||||
0E 06 ef 00 00 // HIM on
|
||||
0E 07 84 00 00 // Enable HVEN and DBL
|
||||
0E 0F 01 00 00 // Disable processing DE signals
|
||||
];
|
||||
};
|
||||
};
|
||||
};
|
||||
/* GMSL LINK config end */
|
||||
|
||||
/* VIDEO PIPE config start */
|
||||
video-pipes {
|
||||
status = "okay";
|
||||
|
||||
// Video Pipe 0
|
||||
video-pipe-config-0 {
|
||||
status = "okay";
|
||||
pipe-id = <0>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
||||
|
||||
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
||||
link-idx = <0>; // Link A/B/C/D: 0/1/2/3
|
||||
|
||||
pipe-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// Send YUV422, FS, and FE from Video Pipe 0 to Controller 1
|
||||
09 0B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
||||
09 2D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
||||
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
||||
09 0D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
||||
09 0E 1e 00 00 // DST0 VC = 0, DT = YUV422 8bit
|
||||
09 0F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
||||
09 10 00 00 00 // DST1 VC = 0, DT = Frame Start
|
||||
09 11 01 00 00 // SRC2 VC = 0, DT = Frame End
|
||||
09 12 01 00 00 // DST2 VC = 0, DT = Frame End
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Video Pipe 1
|
||||
video-pipe-config-1 {
|
||||
status = "okay";
|
||||
pipe-id = <1>; // Video Pipe 1: pipe-id = 1
|
||||
|
||||
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
||||
link-idx = <1>; // Link A/B/C/D: 0/1/2/3
|
||||
|
||||
pipe-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// Send YUV422, FS, and FE from Video Pipe 1 to Controller 1
|
||||
09 4B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
||||
09 6D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
||||
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
||||
09 4D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
||||
09 4E 5e 00 00 // DST0 VC = 1, DT = YUV422 8bit
|
||||
09 4F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
||||
09 50 40 00 00 // DST1 VC = 1, DT = Frame Start
|
||||
09 51 01 00 00 // SRC2 VC = 0, DT = Frame End
|
||||
09 52 41 00 00 // DST2 VC = 1, DT = Frame End
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Video Pipe 2
|
||||
video-pipe-config-2 {
|
||||
status = "okay";
|
||||
pipe-id = <2>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
||||
|
||||
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
||||
link-idx = <2>; // Link A/B/C/D: 0/1/2/3
|
||||
|
||||
pipe-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// Send YUV422, FS, and FE from Video Pipe 2 to Controller 1
|
||||
09 8B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
||||
09 AD 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
||||
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
||||
09 8D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
||||
09 8E 9e 00 00 // DST0 VC = 2, DT = YUV422 8bit
|
||||
09 8F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
||||
09 90 80 00 00 // DST1 VC = 2, DT = Frame Start
|
||||
09 91 01 00 00 // SRC2 VC = 0, DT = Frame End
|
||||
09 92 81 00 00 // DST2 VC = 2, DT = Frame End
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Video Pipe 3
|
||||
video-pipe-config-3 {
|
||||
status = "okay";
|
||||
pipe-id = <3>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
||||
|
||||
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
||||
link-idx = <3>; // Link A/B/C/D: 0/1/2/3
|
||||
|
||||
pipe-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// Send YUV422, FS, and FE from Video Pipe 3 to Controller 1
|
||||
09 CB 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
||||
09 ED 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
||||
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
||||
09 CD 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
||||
09 CE de 00 00 // DST0 VC = 3, DT = YUV422 8bit
|
||||
09 CF 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
||||
09 D0 c0 00 00 // DST1 VC = 3, DT = Frame Start
|
||||
09 D1 01 00 00 // SRC2 VC = 0, DT = Frame End
|
||||
09 D2 c1 00 00 // DST2 VC = 3, DT = Frame End
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
// Software override for parallel mode
|
||||
parallel-mode-config {
|
||||
status = "okay";
|
||||
|
||||
parallel-init-sequence {
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// Enable software override for all pipes since GMSL1 data is parallel mode, bpp=8, dt=0x1e(yuv-8)
|
||||
04 1A f0 00 00 // pipe 0/1/2/3: Enable YUV8-/10-bit mux mode
|
||||
04 0B 40 00 00 // pipe 0 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
||||
04 0C 00 00 00 // pipe 0 and 1 VC software override: 0x00
|
||||
04 0D 00 00 00 // pipe 2 and 3 VC software override: 0x00
|
||||
04 0E 5e 00 00 // pipe 0 DT=0x1E: YUV422 8-bit
|
||||
04 0F 7e 00 00 // pipe 1 DT=0x1E: YUV422 8-bit
|
||||
04 10 7a 00 00 // pipe 2 DT=0x1E, pipe 3 DT=0x1E: YUV422 8-bit
|
||||
04 11 48 00 00 // pipe 1 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
||||
04 12 20 00 00 // pipe 2 bpp=0x08, pipe 3 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
||||
04 15 c0 c0 00 // pipe 0/1 enable software overide
|
||||
04 18 c0 c0 00 // pipe 2/3 enable software overide
|
||||
];
|
||||
};
|
||||
};
|
||||
};
|
||||
/* VIDEO PIPE config end */
|
||||
|
||||
/* MIPI TXPHY config start */
|
||||
mipi-txphys {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = <0>;
|
||||
phy-force-clock-out = <1>;
|
||||
phy-force-clk0-en = <1>;
|
||||
phy-force-clk3-en = <0>;
|
||||
|
||||
// MIPI TXPHY A: phy-id = 0
|
||||
mipi-txphy-config-0 {
|
||||
status = "okay";
|
||||
phy-id = <0>; // MIPI TXPHY ID: 0/1/2/3
|
||||
|
||||
phy-type = <0>;
|
||||
auto-deskew = <0x80>;
|
||||
data-lane-num = <4>;
|
||||
data-lane-map = <0x4>;
|
||||
vc-ext-en = <0>;
|
||||
};
|
||||
|
||||
// MIPI TXPHY B: phy-id = 1
|
||||
mipi-txphy-config-1 {
|
||||
status = "okay";
|
||||
phy-id = <1>; // MIPI TXPHY ID: 0/1/2/3
|
||||
|
||||
phy-type = <0>;
|
||||
auto-deskew = <0x80>;
|
||||
data-lane-num = <4>;
|
||||
data-lane-map = <0xe>;
|
||||
vc-ext-en = <0>;
|
||||
};
|
||||
};
|
||||
/* MIPI TXPHY config end */
|
||||
|
||||
/* local device extra init sequence */
|
||||
extra-init-sequence {
|
||||
status = "disabled";
|
||||
|
||||
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
// common init sequence such as fsync / gpio and so on
|
||||
];
|
||||
};
|
||||
};
|
||||
/* serdes local device end */
|
||||
|
||||
/* serdes remote device start */
|
||||
serdes-remote-device-0 {
|
||||
compatible = "maxim4c,link0,max96715";
|
||||
status = "okay";
|
||||
|
||||
remote-id = <0>; // Same as Link ID: 0/1/2/3
|
||||
|
||||
// Serializer i2c 7bit address remap
|
||||
ser-i2c-addr-def = <0x40>;
|
||||
ser-i2c-addr-map = <0x41>; // 0: disable remap
|
||||
|
||||
port {
|
||||
max96722_dphy0_remote0_out: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_link0_in>;
|
||||
};
|
||||
};
|
||||
|
||||
remote-init-sequence {
|
||||
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
07 84 00 00
|
||||
67 c4 00 00
|
||||
0F bf 00 00
|
||||
3F 08 00 00
|
||||
40 2d 00 00
|
||||
20 10 00 00
|
||||
21 11 00 00
|
||||
22 12 00 00
|
||||
23 13 00 00
|
||||
24 14 00 00
|
||||
25 15 00 00
|
||||
26 16 00 00
|
||||
27 17 00 00
|
||||
30 00 00 00
|
||||
31 01 00 00
|
||||
32 02 00 00
|
||||
33 03 00 00
|
||||
34 04 00 00
|
||||
35 05 00 00
|
||||
36 06 00 00
|
||||
37 07 00 00
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
serdes-remote-device-1 {
|
||||
compatible = "maxim4c,link1,max96715";
|
||||
status = "okay";
|
||||
|
||||
remote-id = <1>; // Same as Link ID: 0/1/2/3
|
||||
|
||||
// Serializer i2c 7bit address remap
|
||||
ser-i2c-addr-def = <0x40>;
|
||||
ser-i2c-addr-map = <0x42>; // 0: disable remap
|
||||
|
||||
port {
|
||||
max96722_dphy0_remote1_out: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_link1_in>;
|
||||
};
|
||||
};
|
||||
|
||||
remote-init-sequence {
|
||||
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
07 84 00 00
|
||||
67 c4 00 00
|
||||
0F bf 00 00
|
||||
3F 08 00 00
|
||||
40 2d 00 00
|
||||
20 10 00 00
|
||||
21 11 00 00
|
||||
22 12 00 00
|
||||
23 13 00 00
|
||||
24 14 00 00
|
||||
25 15 00 00
|
||||
26 16 00 00
|
||||
27 17 00 00
|
||||
30 00 00 00
|
||||
31 01 00 00
|
||||
32 02 00 00
|
||||
33 03 00 00
|
||||
34 04 00 00
|
||||
35 05 00 00
|
||||
36 06 00 00
|
||||
37 07 00 00
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
serdes-remote-device-2 {
|
||||
compatible = "maxim4c,link2,max96715";
|
||||
status = "okay";
|
||||
|
||||
remote-id = <2>; // Same as Link ID: 0/1/2/3
|
||||
|
||||
// Serializer i2c 7bit address remap
|
||||
ser-i2c-addr-def = <0x40>;
|
||||
ser-i2c-addr-map = <0x43>; // 0: disable remap
|
||||
|
||||
port {
|
||||
max96722_dphy0_remote2_out: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_link2_in>;
|
||||
};
|
||||
};
|
||||
|
||||
remote-init-sequence {
|
||||
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
07 84 00 00
|
||||
67 c4 00 00
|
||||
0F bf 00 00
|
||||
3F 08 00 00
|
||||
40 2d 00 00
|
||||
20 10 00 00
|
||||
21 11 00 00
|
||||
22 12 00 00
|
||||
23 13 00 00
|
||||
24 14 00 00
|
||||
25 15 00 00
|
||||
26 16 00 00
|
||||
27 17 00 00
|
||||
30 00 00 00
|
||||
31 01 00 00
|
||||
32 02 00 00
|
||||
33 03 00 00
|
||||
34 04 00 00
|
||||
35 05 00 00
|
||||
36 06 00 00
|
||||
37 07 00 00
|
||||
];
|
||||
};
|
||||
};
|
||||
|
||||
serdes-remote-device-3 {
|
||||
compatible = "maxim4c,link3,max96715";
|
||||
status = "okay";
|
||||
|
||||
remote-id = <3>; // Same as Link ID: 0/1/2/3
|
||||
|
||||
// Serializer i2c 7bit address remap
|
||||
ser-i2c-addr-def = <0x40>;
|
||||
ser-i2c-addr-map = <0x44>; // 0: disable remap
|
||||
|
||||
port {
|
||||
max96722_dphy0_remote3_out: endpoint {
|
||||
remote-endpoint = <&max96722_dphy0_link3_in>;
|
||||
};
|
||||
};
|
||||
|
||||
remote-init-sequence {
|
||||
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
||||
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
||||
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
||||
|
||||
// reg_addr reg_val val_mask delay
|
||||
init-sequence = [
|
||||
07 84 00 00
|
||||
67 c4 00 00
|
||||
0F bf 00 00
|
||||
3F 08 00 00
|
||||
40 2d 00 00
|
||||
20 10 00 00
|
||||
21 11 00 00
|
||||
22 12 00 00
|
||||
23 13 00 00
|
||||
24 14 00 00
|
||||
25 15 00 00
|
||||
26 16 00 00
|
||||
27 17 00 00
|
||||
30 00 00 00
|
||||
31 01 00 00
|
||||
32 02 00 00
|
||||
33 03 00 00
|
||||
34 04 00 00
|
||||
35 05 00 00
|
||||
36 06 00 00
|
||||
37 07 00 00
|
||||
];
|
||||
};
|
||||
};
|
||||
/* serdes remote device end */
|
||||
};
|
||||
};
|
||||
|
||||
&mipi2_csi2 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi2_csi2_input: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csidphy0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi2_csi2_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&cif_mipi2_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif_mipi_lvds2 {
|
||||
status = "okay";
|
||||
/* parameters for do cif reset detecting:
|
||||
* index0: monitor mode,
|
||||
0 for idle,
|
||||
1 for continue,
|
||||
2 for trigger,
|
||||
3 for hotplug (for nextchip)
|
||||
* index1: the frame id to start timer,
|
||||
min is 2
|
||||
* index2: frame num of monitoring cycle
|
||||
* index3: err time for keep monitoring
|
||||
after finding out err (ms)
|
||||
* index4: csi2 err reference val for resetting
|
||||
*/
|
||||
rockchip,cif-monitor = <3 2 1 1000 5>;
|
||||
|
||||
port {
|
||||
cif_mipi2_in: endpoint {
|
||||
remote-endpoint = <&mipi2_csi2_output>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif {
|
||||
status = "okay";
|
||||
rockchip,android-usb-camerahal-enable;
|
||||
};
|
||||
|
||||
&rkcif_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
max96722-dphy0 {
|
||||
max96722_dphy0_pwdn: max96722-dphy0-pwdn {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
|
||||
max96722_dphy0_errb: max96722-dphy0-errb {
|
||||
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none_smt>;
|
||||
};
|
||||
|
||||
max96722_dphy0_lock: max96722-dphy0-lock {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user