rockchip

2025-04-28 11:36:59 +08:00
commit 5dd7a8972b
945 changed files with 332963 additions and 0 deletions
--- a/rk356x/rp-mipi-camera-rk628d-csi2hdmi.dtsi
+++ b/rk356x/rp-mipi-camera-rk628d-csi2hdmi.dtsi
@@ -0,0 +1,101 @@
+
+&i2c5 {
+    clock-frequency = <400000>;
+    status = "okay";
+    pinctrl-0 = <&i2c5m0_xfer>;
+
+    rk628_csi_v4l2: rk628_csi_v4l2@50 {
+        status = "okay";
+                reg = <0x50>;
+        compatible = "rockchip,rk628-csi-v4l2";
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&refclk_pins>;
+                assigned-clocks = <&pmucru CLK_WIFI>;
+                assigned-clock-rates = <24000000>;
+                clocks = <&pmucru CLK_WIFI>;
+                clock-names = "soc_24M";
+
+                interrupt-parent = <&gpio2>;
+                interrupts = <RK_PD7 IRQ_TYPE_LEVEL_HIGH>;
+                enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+                reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+         //hdcp-enable = <1>;
+        scaler-en = <1>;
+
+                   /*
+            * If the hpd output level is inverted on the circuit,
+                * the following configuration needs to be enabled.
+            */
+
+            /* hpd-output-inverted; */
+            plugin-det-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+            //power-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            rockchip,camera-module-index = <0>;
+            rockchip,camera-module-facing = "back";
+            rockchip,camera-module-name = "RK628-CSI";
+            rockchip,camera-module-lens-name = "NC";
+
+        port {
+                    hdmiin_out0: endpoint {
+                            remote-endpoint = <&mipi_in>;
+                            data-lanes = <1 2 3 4>;
+                    };
+            };
+        };
+};
+
+
+&csi2_dphy_hw {
+    status = "okay";
+};
+
+&csi2_dphy0 {
+    status = "okay";
+    ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        
+        port@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            mipi_in: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&hdmiin_out0>;
+                data-lanes = <1 2 3 4>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            csidphy0_out: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&isp0_in>;
+            };
+        };
+    };
+};
+
+&rkisp {
+    status = "okay";
+};
+
+&rkisp_mmu {
+    status = "okay";
+};
+
+&rkisp_vir0 {
+    status = "okay";
+    port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        isp0_in: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&csidphy0_out>;
+        };
+    };
+};
+