rockchip

2025-04-28 11:36:59 +08:00
commit 5dd7a8972b
945 changed files with 332963 additions and 0 deletions
--- a/rk356x/rp-lcd-mipi1-10-1920-1200.dtsi
+++ b/rk356x/rp-lcd-mipi1-10-1920-1200.dtsi
@@ -0,0 +1,141 @@
+#include "rp-lcd-hdmi.dtsi"
+#define RP_SINGLE_LCD
+
+
+
+
+
+&dsi0 {
+    status = "okay";
+    //rockchip,lane-rate = <1200>;
+    dsi0_panel: panel@0 {
+        status = "okay";
+        compatible = "simple-panel-dsi";
+        reg = <0>;
+    //    reset-delay-ms = <60>;
+    //    init-delay-ms = <60>;
+        enable-delay-ms = <160>;
+        prepare-delay-ms = <200>;
+    //    unprepare-delay-ms = <60>;
+    //    disable-delay-ms = <60>;
+                dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+                                MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
+                dsi,format = <MIPI_DSI_FMT_RGB888>;
+
+        dsi,lanes  = <4>;
+
+        /**
+         * power-supply = <>;
+         * reset-gpios = <>;
+         *
+         * lcd reset pin and power supply
+         * please refer to ***-lcd-gpio.dtsi
+         * that included in main dts.
+         */
+
+        disp_timings0: display-timings {
+            native-mode = <&dsi0_timing0>;
+            dsi0_timing0: timing0 {
+                                clock-frequency = <150000000>;
+                                hactive = <1920>;
+                                vactive = <1200>;
+                                hback-porch = <32>;    //60
+                                hfront-porch = <110>;    //16
+                                vback-porch = <14>;    //23
+                                vfront-porch = <11>;    //12
+                                hsync-len = <1>;    //20
+                                vsync-len = <1>;    //3
+                                de-active = <1>;
+                                hsync-active = <1>;
+                                vsync-active = <1>;
+                                pixelclk-active = <1>;
+
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_panel>;
+                };
+            };
+        };
+    };
+
+    ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@1 {
+            reg = <1>;
+            dsi_out_panel: endpoint {
+                remote-endpoint = <&panel_in_dsi>;
+            };
+        };
+    };
+
+};
+
+&dsi0_in_vp0 {
+    status = "disabled";
+};
+
+&dsi0_in_vp1 {
+    status = "okay";
+};
+
+&video_phy0 {
+    status = "okay";
+};
+
+&route_dsi0 {
+    status = "okay";
+    connect = <&vp1_out_dsi0>;
+};
+
+
+&gt9xx {
+    status = "okay";
+    compatible = "goodix,gt9xx";
+    reg = <0x5d>;
+    gtp_resolution_x = <1920>;
+    gtp_resolution_y = <1200>;
+    gtp_int_tarigger = <1>;
+    gtp_change_x2y = <0>;
+    gtp_overturn_x = <0>;
+    gtp_overturn_y = <0>;
+    gtp_send_cfg = <1>;
+    gtp_touch_wakeup = <1>;
+
+    /**
+     * goodix_rst_gpio = <>;
+     * goodix_irq_gpio = <>;
+     *
+     * touch panel interrupt and reset pin
+     * please refer to ***-lcd-gpio.dtsi
+     * that included in main dts.
+     */
+
+    goodix,cfg-group0 = [
+        55 80 07 B0 04 0A 3D 00 01 08 28
+        05 50 32 03 05 00 00 00 00 00 00
+        00 18 1A 1E 14 8E 2F 99 17 15 31
+        0D 00 00 02 9B 03 1D 00 00 00 00
+        00 00 00 00 00 00 00 1E 78 94 C5
+        02 08 00 00 00 5B 22 00 4C 2D 00
+        41 3C 00 38 4F 00 32 69 00 32 00
+        00 00 00 00 00 00 00 00 00 00 00
+        00 00 00 00 00 00 00 00 00 00 00
+        00 00 00 00 00 00 00 00 00 00 00
+        00 00 00 01 04 05 06 07 08 09 0C
+        0D 0E 0F 10 11 14 15 16 17 FF FF
+        00 00 00 00 00 00 00 00 00 00 00
+        02 04 06 07 08 0A 0C 0D 0F 10 11
+        12 13 19 1B 1C 1E 1F 20 21 22 23
+        24 25 26 27 28 29 FF FF FF 00 00
+        00 00 00 00 00 00 00 00 6B 01];
+};