rockchip
This commit is contained in:
zhangpeng
612
rk3399/rd-box-h-rk3399.dts
Executable file
612
rk3399/rd-box-h-rk3399.dts
Executable file
@@ -0,0 +1,612 @@
|
||||
#include "../rk3399-sapphire-excavator-linux.dts"
|
||||
|
||||
//#include ""
|
||||
#include "rp-usb-typea.dtsi"
|
||||
|
||||
|
||||
/** lcd configuration */
|
||||
//#include "rp-lcd-hdmi.dtsi"
|
||||
//#include "rp-lcd-mipi-5-720-1280-v2-boxTP.dtsi"
|
||||
//#include "rp-lcd-mipi-5-720-1280-v2.dtsi"
|
||||
#include "rp-lcd-mipi-7-720-1280-jc070hd005-v1.dtsi"
|
||||
//#include "rp-lcd-mipi-8-800-1280-v3.dtsi"
|
||||
//#include "rp-lcd-mipi-8-1200-1920.dtsi"
|
||||
//#include "rp-lcd-mipi-10-800-1280-v3.dtsi"
|
||||
//#include "rp-rd-lcd-edp-13.3-15.6-1920-1080.dtsi"
|
||||
|
||||
|
||||
|
||||
/ {
|
||||
|
||||
model = "rd-box-h-rk3399";
|
||||
compatible = "rpdzkj,rd-box-h-rk3399", "rockchip,rk3399";
|
||||
|
||||
|
||||
rp_power{
|
||||
compatible = "rp_power";
|
||||
rp_not_deep_sleep = <1>;
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* #define GPIO_FUNCTION_OUTPUT 0
|
||||
* #define GPIO_FUNCTION_INPUT 1
|
||||
* #define GPIO_FUNCTION_IRQ 2
|
||||
* #define GPIO_FUNCTION_FLASH 3
|
||||
* #define GPIO_FUNCTION_OUTPUT_CTRL 4 //output and creat proc ctrl
|
||||
*
|
||||
* you can define the gpio function as above
|
||||
* on gpio_function = <>;
|
||||
*/
|
||||
|
||||
fan_en { //fan
|
||||
gpio_num = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
|
||||
hub_rst { // usb hub reset pin
|
||||
gpio_num = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
|
||||
breath-led { //run led
|
||||
gpio_num = <&gpio4 24 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <3>;
|
||||
};
|
||||
|
||||
vdd-en { //vdd_5v, vdd_io power en
|
||||
gpio_num = <&gpio4 30 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
|
||||
vdd_3g { // 4g module power enable
|
||||
gpio_num = <&gpio4 22 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
|
||||
host_en { //usb port power enable
|
||||
gpio_num = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
|
||||
otg_host_en { /* usb3.0 otg port host power en,
|
||||
* refer to Schematic diagram,
|
||||
* the default status is needed
|
||||
* by host active, such as below
|
||||
* GPIO_ACTIVE_LOW
|
||||
*/
|
||||
gpio_num = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
rp_gpio{
|
||||
status = "okay";
|
||||
compatible = "rp_gpio";
|
||||
|
||||
/**
|
||||
* GPIO example, place you want to control as below
|
||||
*
|
||||
* gpioxxx { // the node name will display on /proc/rp_gpio, you can define any character string
|
||||
* gpio_num = <>; // gpio you want ot control
|
||||
* gpio_function = <>; // function of current gpio: 0 output, 1 input, 3 blink per 2S
|
||||
* gpio_event = <KEY_F14>; // optional property used to define gpio report event such as KEY_F14, only works in case of gpio_function = <1>;
|
||||
* };
|
||||
*/
|
||||
|
||||
gpio0a2 {
|
||||
gpio_num = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio1a2 {
|
||||
gpio_num = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio1c7 {
|
||||
gpio_num = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio0b3 {
|
||||
gpio_num = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio3d4 {
|
||||
gpio_num = <&gpio3 28 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio3d5 {
|
||||
gpio_num = <&gpio3 29 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio3d6 {
|
||||
gpio_num = <&gpio3 30 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio4c5 {
|
||||
gpio_num = <&gpio4 21 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
|
||||
gpio4d3 {
|
||||
gpio_num = <&gpio4 27 GPIO_ACTIVE_LOW>;
|
||||
gpio_function = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
rt5640-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,rt5640-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
//"Headphone", "Headphone Jack", //fix for headphone dapm name to match drivers
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Speaker";
|
||||
simple-audio-card,routing =
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN1P", "Mic Jack",
|
||||
//"Headphone Jack", "HPOL", //fix for headphone dapm name to match drivers
|
||||
//"Headphone Jack", "HPOR",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"Speaker", "SPOLP",
|
||||
"Speaker", "SPOLN",
|
||||
"Speaker", "SPORP",
|
||||
"Speaker", "SPORN";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rt5640_hp_det_gpio>;
|
||||
simple-audio-card,hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rt5640>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
/** redefine for fix real used gpio */
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
//wifi-bt-power-toggle;
|
||||
uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; // GPIO2_C3
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_gpios>;
|
||||
//BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; // GPIOx_xx
|
||||
BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; // GPIO0_B1
|
||||
BT,wake_gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; // GPIO0_B4
|
||||
BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; // GPIO0_A4
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/** spi2can mcp2515 configuration */
|
||||
clkin_24m: osci_24m {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu_b: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
//clock-output-names = "xin32k", "rk808-clkout2";
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2"; //wifi
|
||||
/*
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_3v0>;
|
||||
|
||||
*/
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc3v0_tp";
|
||||
regulator-state-mem {
|
||||
//regulator-off-in-suspend;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
// regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
// regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
|
||||
audio-supply = <&vcca1v8_codec>; /* audio_gpio3d4a_ms */
|
||||
sdmmc-supply = <&vccio_sd>; /* sdmmc_gpio4b_ms */
|
||||
gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
|
||||
};
|
||||
|
||||
&gmac {
|
||||
/***** redefine delay value for rtl8211f */
|
||||
status = "okay";
|
||||
tx_delay = <0x21>;
|
||||
rx_delay = <0x23>;
|
||||
//max-speed = <100>; /* set eth maximal speed, default utomatically adapt */
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmu1830-supply = <&vcc_1v8>; //nano usb
|
||||
};
|
||||
|
||||
&rk808 {
|
||||
rtc {
|
||||
/****** disable rtc-rk808 for use hym8563 */
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
|
||||
rt5640: rt5640@1c {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "realtek,rt5640";
|
||||
reg = <0x1c>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
realtek,in1-differential;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s_8ch_mclk>;
|
||||
io-channels = <&saradc 4>;
|
||||
//hp-con-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
||||
//hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
hp-det-adc-value = <500>;
|
||||
status = "okay";
|
||||
};
|
||||
rtc-hym8563@51 {
|
||||
status = "okay";
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
|
||||
#if 0
|
||||
rk628_hdmi2csi: rk628_hdmi2csi@50 {
|
||||
reg = <0x50>;
|
||||
compatible = "rockchip,rk628-hdmi2csi";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; //gpio2_a7
|
||||
enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
plugin-det-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
#else
|
||||
rk628_hdmi2csi_v4l2: rk628_hdmi2csi_v4l2@50 {
|
||||
reg = <0x50>;
|
||||
compatible = "rockchip,rk628-csi-v4l2";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; //gpio2_a7
|
||||
enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
plugin-det-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "RK628-CSI";
|
||||
rockchip,camera-module-lens-name = "NC";
|
||||
|
||||
port {
|
||||
hdmiin_out1: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
#endif
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
spi_wk2xxx: spi_wk2xxx@00{
|
||||
status = "okay";
|
||||
compatible = "spi-wk2xxx";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
reset-gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
||||
irq-gpio = <&gpio0 8 IRQ_TYPE_EDGE_FALLING>;
|
||||
cs-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/*spi2 to can :gpio_irq conflict ov13850f in i2c1 define*/
|
||||
&ov13850f{
|
||||
status = "disabled";
|
||||
};
|
||||
/** for rk628 v4l2 link */
|
||||
&ov13850b {
|
||||
status = "disabled";
|
||||
};
|
||||
&mipi_in_ucam0 {
|
||||
remote-endpoint = <&hdmiin_out1>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
|
||||
&spi2{
|
||||
status = "okay";
|
||||
can0: mcp251x@0 {
|
||||
compatible = "microchip,mcp2515";
|
||||
reg = <0>;
|
||||
clocks = <&clkin_24m>;
|
||||
//interrupt-parent = <&gpio1>;
|
||||
//interrupts = <30 GPIO_ACTIVE_LOW>;
|
||||
//interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio_irq = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
||||
spi-max-frequency = <10000000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pinctrl {
|
||||
rt5640 {
|
||||
rt5640_hp_det_gpio: rt5640_hp_det_gpio {
|
||||
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/** redefine for sdo1, sdo2 and sdo3 to be gpio */
|
||||
i2s0 {
|
||||
i2s0_8ch_bus: i2s0-8ch-bus {
|
||||
rockchip,pins =
|
||||
<3 24 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<3 25 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<3 26 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<3 27 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<3 31 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user