rockchip
This commit is contained in:
zhangpeng
748
rk3326-evb-lp3-v10-robot-linux.dts
Normal file
748
rk3326-evb-lp3-v10-robot-linux.dts
Normal file
@@ -0,0 +1,748 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "px30-robot.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip rk3326 evb lpddr3 v10 board for robot linux";
|
||||
compatible = "rockchip,rk3326-evb-lp3-v10-robot-linux", "rockchip,rk3326";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
poll-interval = <100>;
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
esc-key {
|
||||
linux,code = <KEY_ESC>;
|
||||
label = "esc";
|
||||
press-threshold-microvolt = <1310000>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <KEY_HOME>;
|
||||
label = "home";
|
||||
press-threshold-microvolt = <624000>;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <KEY_MENU>;
|
||||
label = "menu";
|
||||
press-threshold-microvolt = <987000>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
};
|
||||
|
||||
rk817-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,rk817-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_2ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk817_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
/*clocks = <&rk817 1>;*/
|
||||
/*clock-names = "ext_clock";*/
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
|
||||
};
|
||||
|
||||
vccsys: vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
wifi_chip_type = "AP6210";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&bus_apll {
|
||||
bus-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cif_new {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
cif_in: endpoint {
|
||||
remote-endpoint = <&gc2155_out>;
|
||||
vsync-active = <0>;
|
||||
hsync-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <280>;
|
||||
i2c-scl-falling-time-ns = <16>;
|
||||
|
||||
rk817: pmic@20 {
|
||||
compatible = "rockchip,rk817";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off", "pmic-reset";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
||||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||||
pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
//fb-inner-reg-idxs = <2>;
|
||||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||||
pmic-reset-func = <1>;
|
||||
|
||||
vcc1-supply = <&vccsys>;
|
||||
vcc2-supply = <&vccsys>;
|
||||
vcc3-supply = <&vccsys>;
|
||||
vcc4-supply = <&vccsys>;
|
||||
vcc5-supply = <&vccsys>;
|
||||
vcc6-supply = <&vccsys>;
|
||||
vcc7-supply = <&vcc_3v0>;
|
||||
vcc8-supply = <&vccsys>;
|
||||
vcc9-supply = <&dcdc_boost>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk817_ts_gpio1: rk817_ts_gpio1 {
|
||||
pins = "gpio_ts";
|
||||
function = "pin_fun1";
|
||||
/* output-low; */
|
||||
/* input-enable; */
|
||||
};
|
||||
|
||||
rk817_gt_gpio2: rk817_gt_gpio2 {
|
||||
pins = "gpio_gt";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_pin_ts: rk817_pin_ts {
|
||||
pins = "gpio_ts";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_pin_gt: rk817_pin_gt {
|
||||
pins = "gpio_gt";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_null: rk817_slppin_null {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_slp: rk817_slppin_slp {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk817_slppin_rst: rk817_slppin_rst {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v0: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vcc_1v0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_soc: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-name = "vcc1v8_soc";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v0_soc: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-name = "vcc1v0_soc";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_pmu: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-name = "vcc3v0_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG6 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vcc2v8_dvp: LDO_REG7 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v5_dvp: LDO_REG9 {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
regulator-name = "vdd1v5_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc_boost: BOOST {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4700000>;
|
||||
regulator-max-microvolt = <5400000>;
|
||||
regulator-name = "boost";
|
||||
};
|
||||
|
||||
otg_switch: OTG_SWITCH {
|
||||
regulator-name = "otg_switch";
|
||||
};
|
||||
};
|
||||
|
||||
battery {
|
||||
compatible = "rk817,battery";
|
||||
ocv_table = <3500 3625 3685 3697 3718 3735 3748
|
||||
3760 3774 3788 3802 3816 3834 3853
|
||||
3877 3908 3946 3975 4018 4071 4106>;
|
||||
design_capacity = <2500>;
|
||||
design_qmax = <2750>;
|
||||
bat_res = <100>;
|
||||
sleep_enter_current = <300>;
|
||||
sleep_exit_current = <300>;
|
||||
sleep_filter_current = <100>;
|
||||
power_off_thresd = <3500>;
|
||||
zero_algorithm_vol = <3850>;
|
||||
max_soc_offset = <60>;
|
||||
monitor_sec = <5>;
|
||||
sample_res = <10>;
|
||||
virtual_power = <1>;
|
||||
};
|
||||
|
||||
charger {
|
||||
compatible = "rk817,charger";
|
||||
min_input_voltage = <4500>;
|
||||
max_input_current = <1500>;
|
||||
max_chrg_current = <2000>;
|
||||
max_chrg_voltage = <4200>;
|
||||
chrg_term_mode = <0>;
|
||||
chrg_finish_cur = <300>;
|
||||
virtual_power = <0>;
|
||||
dc_det_adc = <0>;
|
||||
extcon = <&u2phy>;
|
||||
};
|
||||
|
||||
rk817_codec: codec {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rockchip,rk817-codec";
|
||||
clocks = <&cru SCLK_I2S1_OUT>;
|
||||
clock-names = "mclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1_2ch_mclk>;
|
||||
hp-volume = <20>;
|
||||
spk-volume = <3>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* 24M mclk is shared for multiple cameras */
|
||||
pinctrl-0 = <&i2c2_xfer &cif_clkout_m0>;
|
||||
|
||||
/* These are relatively safe rise/fall times; TODO: measure */
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
|
||||
gc2155: gc2155@3c {
|
||||
compatible = "gc,gc2155";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cif_pin_m0>;
|
||||
|
||||
clocks = <&cru SCLK_CIF_OUT>;
|
||||
clock-names = "xvclk";
|
||||
|
||||
avdd-supply = <&vcc2v8_dvp>;
|
||||
dovdd-supply = <&vcc1v8_dvp>;
|
||||
dvdd-supply = <&vcc1v8_dvp>;
|
||||
|
||||
/* hw changed the pwdn to gpio2_b5 */
|
||||
pwdn-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
gc2155_out: endpoint {
|
||||
remote-endpoint = <&cif_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ov5695: ov5695@36 {
|
||||
compatible = "ovti,ov5695";
|
||||
reg = <0x36>;
|
||||
|
||||
clocks = <&cru SCLK_CIF_OUT>;
|
||||
clock-names = "xvclk";
|
||||
|
||||
avdd-supply = <&vcc2v8_dvp>;
|
||||
dovdd-supply = <&vcc1v8_dvp>;
|
||||
dvdd-supply = <&vcc1v8_dvp>;
|
||||
|
||||
/*reset-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;*/
|
||||
pwdn-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
ucam_out: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_2ch {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio1-supply = <&vcc1v8_soc>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc1v8_dvp>;
|
||||
vccio4-supply = <&vcc_3v0>;
|
||||
vccio5-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&isp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mipi_dphy_rx0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_in_ucam: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&ucam_out>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dphy_rx0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&isp0_mipi_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nandc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkisp1 {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
isp0_mipi_in: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&dphy_rx0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
|
||||
pmuio1-supply = <&vcc3v0_pmu>;
|
||||
pmuio2-supply = <&vcc3v0_pmu>;
|
||||
};
|
||||
|
||||
&rk_rga {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc1v8_soc>;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
card-detect-delay = <800>;
|
||||
ignore-pm-notify;
|
||||
/*cd-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; [> CD GPIO <]*/
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
ignore-pm-notify;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
pinctrl-names = "init", "default";
|
||||
pinctrl-0 = <&tsadc_otp_gpio>;
|
||||
pinctrl-1 = <&tsadc_otp_out>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_xfer &uart1_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vip_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpp_srv {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hevc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hevc_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
cif-pin-m0 {
|
||||
cif_pin_m0: cif-pin-m0 {
|
||||
rockchip,pins =
|
||||
<2 RK_PA0 1 &pcfg_pull_none>,/* cif_data2 */
|
||||
<2 RK_PA1 1 &pcfg_pull_none>,/* cif_data3 */
|
||||
<2 RK_PA2 1 &pcfg_pull_none>,/* cif_data4 */
|
||||
<2 RK_PA3 1 &pcfg_pull_none>,/* cif_data5 */
|
||||
<2 RK_PA4 1 &pcfg_pull_none>,/* cif_data6 */
|
||||
<2 RK_PA5 1 &pcfg_pull_none>,/* cif_data7 */
|
||||
<2 RK_PA6 1 &pcfg_pull_none>,/* cif_data8 */
|
||||
<2 RK_PA7 1 &pcfg_pull_none>,/* cif_data9 */
|
||||
<2 RK_PB0 1 &pcfg_pull_none>,/* cif_sync */
|
||||
<2 RK_PB1 1 &pcfg_pull_none>,/* cif_href */
|
||||
<2 RK_PB2 1 &pcfg_pull_none>;/* cif_clkin */
|
||||
};
|
||||
|
||||
cif_pin_m1: cif-pin-m1 {
|
||||
rockchip,pins =
|
||||
<3 RK_PA3 3 &pcfg_pull_none>,/* cif_data2 */
|
||||
<3 RK_PA5 3 &pcfg_pull_none>,/* cif_data3 */
|
||||
<3 RK_PA7 3 &pcfg_pull_none>,/* cif_data4 */
|
||||
<3 RK_PB0 3 &pcfg_pull_none>,/* cif_data5 */
|
||||
<3 RK_PB1 3 &pcfg_pull_none>,/* cif_data6 */
|
||||
<3 RK_PB4 3 &pcfg_pull_none>,/* cif_data7 */
|
||||
<3 RK_PB6 3 &pcfg_pull_none>,/* cif_data8 */
|
||||
<3 RK_PB7 3 &pcfg_pull_none>,/* cif_data9 */
|
||||
<3 RK_PD1 3 &pcfg_pull_none>,/* cif_sync */
|
||||
<3 RK_PD2 3 &pcfg_pull_none>,/* cif_href */
|
||||
<3 RK_PD3 3 &pcfg_pull_none>;/* cif_clkin */
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
|
||||
soc_slppin_slp: soc_slppin_slp {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
soc_slppin_rst: soc_slppin_rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* DON'T PUT ANYTHING BELOW HERE. PUT IT ABOVE PINCTRL */
|
||||
/* DON'T PUT ANYTHING BELOW HERE. PUT IT ABOVE PINCTRL */
|
||||
/* DON'T PUT ANYTHING BELOW HERE. PUT IT ABOVE PINCTRL */
|
||||
Reference in New Issue
Block a user