zhangpeng/rockchip
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
01智能控制模块
rockchip/rk3399/rd-rk3399.dts
zhangpeng 5dd7a8972b rockchip
2025-04-28 11:36:59 +08:00

240 lines
6.8 KiB
Plaintext
Executable File
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/dts-v1/;
#include "rp-rk3399-board.dtsi"
#include "rp-pmu-rk808.dtsi"
#include "rp-audio-rt5651.dtsi"
#include "rp-gpio-key.dtsi"
#include "rp-adc-key.dtsi"
#include "rp-gmac.dtsi"
#include "rp-mipi-ov13850-camera.dtsi"
//#include "rp-hdmiin.dtsi"
#include "rp-pcie.dtsi"
#include "rp-usb2-host0.dtsi"
#include "rp-usb2-host1.dtsi"
#include "rp-usb3-otg-typeA.dtsi"
//#include "rp-usb3-otg-typeC.dtsi"
#include "rp-usb3_1-host.dtsi"
#include "rp-wifi-sdio.dtsi"
#include "rp-bt-uart0.dtsi"
#include "rp-sdcard-mmc1.dtsi"
#include "rp-lcd-hdmi.dtsi"
//#include "rp-lcd-mipi-5-720-1280.dtsi"
//#include "rp-lcd-mipi-5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi-5.5-720-1280.dtsi"
//#include "rp-lcd-mipi-5.5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi-5.5-1080-1920.dtsi"
#include "rp-lcd-mipi-7-1024-600.dtsi"
//#include "rp-lcd-mipi-7-800-1280.dtsi"
//#include "rp-lcd-mipi-7-1200-1920.dtsi"
//#include "rp-lcd-mipi-8-800-1280.dtsi"
//#include "rp-lcd-mipi-8-800-1280-new.dtsi"
//#include "rp-lcd-mipi-10-800-1280.dtsi"
//#include "rp-lcd-mipi-10-1920-1200.dtsi"
//#include "rp-lcd-edp-13.3-1920-1080.dtsi"
/ {
model = "rd-rk3399";
compatible = "rockchip,rk3399-excavator-linux", "rockchip,rk3399";
fan_gpio_control {
compatible = "fan_gpio_control";
gpio-pin = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
thermal-zone = "cpu-thermal";
threshold-temp = <60000>; //60C
running-time = <10000>; //10s
status = "okay";
};
rp_power{
compatible = "rp_power";
rp_not_deep_sleep = <1>;
status = "okay";
/*
* #define GPIO_FUNCTION_OUTPUT 0
* #define GPIO_FUNCTION_INPUT 1
* #define GPIO_FUNCTION_IRQ 2
* #define GPIO_FUNCTION_FLASH 3
* #define GPIO_FUNCTION_OUTPUT_CTRL 4 //output and creat proc ctrl
*
* you can define the gpio function as above
* on gpio_function = <>;
*
*If you want to set the uboot to high level, add the lower properties
* regulator_uboot_on
*/
breathe-led { //usb hub reset pin
gpio_num = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
gpio_function = <3>;
regulator_uboot_on;
};
power_en-gpio { //usb hub reset pin
gpio_num = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
regulator_uboot_on;
};
3v3_power_en { //usb hub reset pin
gpio_num = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
regulator_uboot_on;
};
hub_rst { //usb hub reset pin
gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
regulator_uboot_on;
};
//fan_open { //fan
// gpio_num = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
// gpio_function = <4>;
// regulator_uboot_on;
//};
};
rp_gpio{
status = "okay";
compatible = "rp_gpio";
base_value = <0>;
gpio4c5 {
gpio_num = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
gpio_function = <0>; //0:output，1:input
};
gpio4d1 {
gpio_num = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
gpio_function = <0>; //0:output，1:input
};
gpio4d3 {
gpio_num = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
gpio_function = <0>; //0:output，1:input
};
};
wireless-bluetooth {
compatible = "bluetooth-platdata";
clocks = <&rk808 1>;
clock-names = "ext_clock";
//wifi-bt-power-toggle;
uart_rts_gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart0_rts>, <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_irq_gpio>;
pinctrl-1 = <&uart0_gpios>;
//BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
//BT,reset_gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
BT,wake_gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
//BT,wake_host_irq = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
status = "okay";
};
};
&io_domains {
status = "okay";
bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
audio-supply = <&vcca1v8_codec>; /* audio_gpio3d4a_ms */
sdmmc-supply = <&vcc_sdio>; /* sdmmc_gpio4b_ms */
gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
};
&pmu_io_domains {
status = "okay";
pmu1830-supply = <&vcc_1v8>; //nano usb
};
/*&spi_wk2xxx{
status = "okay";
reset-gpio = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
irq-gpio = <&gpio0 RK_PB0 IRQ_TYPE_EDGE_FALLING>;//modify
cs-gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
};*/
&spi1 {
status = "okay";
spi_wk2xxx: spi_wk2xxx@0{
status = "okay";
compatible = "spi-wk2xxx";
reg = <0>;
spi-max-frequency = <10000000>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
irq-gpio = <&gpio0 8 IRQ_TYPE_EDGE_FALLING>;
cs-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
};
//used to bluetooth
&uart0 {
status = "okay";
//dma-names = "tx", "rx";
//dmas = <&dmac_peri 0>, <&dmac_peri 1>;
};
//conflicts to ethernet
&uart1 {
status = "disabled";
//dma-names = "tx", "rx";
//dmas = <&dmac_peri 2>, <&dmac_peri 3>;
};
//conflicts to debugger
&uart2 {
status = "disabled";
//dma-names = "tx", "rx";
//dmas = <&dmac_peri 4>, <&dmac_peri 5>;
};
//conflicts to ethernet
&uart3 {
status = "disabled";
//dma-names = "tx", "rx";
//dmas = <&dmac_peri 6>, <&dmac_peri 7>;
};
&uart4 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&uart4_xfer>;
dma-names = "tx", "rx";
dmas = <&dmac_peri 8>, <&dmac_peri 9>;
};
&fiq_debugger {
rockchip,serial-id = <2>; //uart2
rockchip,wake-irq = <0>;
rockchip,irq-mode-enable = <1>;
compatible = "rockchip,fiq-debugger";
rockchip,baudrate = <115200>;
pinctrl-names = "default";
pinctrl-0 = <&uart2c_xfer>;
};
&pinctrl {
wireless-bluetooth {
bt_wake_gpio: bt-wake-gpio {
rockchip,pins =
<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink