// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2023 Rockchip Electronics Co., Ltd. * */ #include / { max96712_dphy3_osc0: max96712-dphy3-oscillator@0 { compatible = "fixed-clock"; #clock-cells = <1>; clock-frequency = <25000000>; clock-output-names = "max96712-dphy3-osc0"; }; max96712_dphy3_vcc1v2: max96712-dphy3-vcc1v2 { compatible = "regulator-fixed"; regulator-name = "max96712_dphy3_vcc1v2"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; startup-delay-us = <850>; vin-supply = <&vcc5v0_sys>; }; max96712_dphy3_vcc1v8: max96712-dphy3-vcc1v8 { compatible = "regulator-fixed"; regulator-name = "max96712_dphy3_vcc1v8"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <200>; vin-supply = <&vcc_3v3_s3>; }; max96712_dphy3_poc: max96712-dphy3-poc { compatible = "regulator-fixed"; regulator-name = "max96712_dphy3_poc"; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; startup-delay-us = <1050>; off-on-delay-us = <515000>; vin-supply = <&vcc12v_dcin>; }; }; &csi2_dphy1_hw { status = "okay"; }; &csi2_dphy3 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; mipi_dphy3_in_max96712: endpoint@1 { reg = <1>; remote-endpoint = <&max96712_dphy3_out>; data-lanes = <1 2 3 4>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; csidphy3_out: endpoint@0 { reg = <0>; remote-endpoint = <&mipi4_csi2_input>; }; }; }; }; &i2c6 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c6m3_xfer>; max96712_dphy3: max96712@29 { compatible = "maxim4c,max96712"; status = "okay"; reg = <0x29>; clock-names = "xvclk"; clocks = <&max96712_dphy3_osc0 0>; pinctrl-names = "default"; pinctrl-0 = <&max96712_dphy3_pwdn>, <&max96712_dphy3_errb>, <&max96712_dphy3_lock>; power-domains = <&power RK3588_PD_VI>; rockchip,grf = <&sys_grf>; pwdn-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; lock-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; vcc1v2-supply = <&max96712_dphy3_vcc1v2>; vcc1v8-supply = <&max96712_dphy3_vcc1v8>; poc-supply = <&max96712_dphy3_poc>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "max96712"; rockchip,camera-module-lens-name = "max96712"; port { max96712_dphy3_out: endpoint { remote-endpoint = <&mipi_dphy3_in_max96712>; data-lanes = <1 2 3 4>; }; }; /* support mode config start */ support-mode-config { status = "okay"; bus-format = ; sensor-width = <1920>; sensor-height = <1440>; max-fps-numerator = <10000>; max-fps-denominator = <300000>; bpp = <16>; link-freq-idx = <20>; vc-array = <0x10 0x20 0x40 0x80>; // VC0~3: bit4~7 }; /* support mode config end */ /* serdes local device start */ serdes-local-device { status = "okay"; /* GMSL LINK config start */ gmsl-links { status = "okay"; link-vdd-ldo1-en = <1>; link-vdd-ldo2-en = <1>; // Link A: link-id = 0 gmsl-link-config-0 { status = "okay"; link-id = <0>; // Link ID: 0/1/2/3 link-type = <1>; link-rx-rate = <1>; link-tx-rate = <0>; port { max96712_dphy3_link0_in: endpoint { remote-endpoint = <&max96712_dphy3_remote0_out>; }; }; link-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 14 D1 03 00 00 // VGAHiGain 14 45 00 00 00 // Disable SSC ]; }; }; // Link B: link-id = 1 gmsl-link-config-1 { status = "okay"; link-id = <1>; // Link ID: 0/1/2/3 link-type = <1>; link-rx-rate = <1>; link-tx-rate = <0>; port { max96712_dphy3_link1_in: endpoint { remote-endpoint = <&max96712_dphy3_remote1_out>; }; }; link-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 15 D1 03 00 00 // VGAHiGain 15 45 00 00 00 // Disable SSC ]; }; }; // Link C: link-id = 2 gmsl-link-config-2 { status = "okay"; link-id = <2>; // Link ID: 0/1/2/3 link-type = <1>; link-rx-rate = <1>; link-tx-rate = <0>; port { max96712_dphy3_link2_in: endpoint { remote-endpoint = <&max96712_dphy3_remote2_out>; }; }; link-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 16 D1 03 00 00 // VGAHiGain 16 45 00 00 00 // Disable SSC ]; }; }; // Link D: link-id = 3 gmsl-link-config-3 { status = "okay"; link-id = <3>; // Link ID: 0/1/2/3 link-type = <1>; link-rx-rate = <1>; link-tx-rate = <0>; port { max96712_dphy3_link3_in: endpoint { remote-endpoint = <&max96712_dphy3_remote3_out>; }; }; link-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 17 D1 03 00 00 // VGAHiGain 17 45 00 00 00 // Disable SSC ]; }; }; }; /* GMSL LINK config end */ /* VIDEO PIPE config start */ video-pipes { status = "okay"; // Video Pipe 0 video-pipe-config-0 { status = "okay"; pipe-id = <0>; // Video Pipe ID: 0/1/2/3/4/5/6/7 pipe-idx = <2>; // Video Pipe X/Y/Z/U: 0/1/2/3 link-idx = <0>; // Link A/B/C/D: 0/1/2/3 pipe-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ // Send YUV422, FS, and FE from Video Pipe 0 to Controller 1 09 0B 07 00 00 // Enable 0/1/2 SRC/DST Mappings 09 2D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1; // For the following MSB 2 bits = VC, LSB 6 bits = DT 09 0D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit 09 0E 1e 00 00 // DST0 VC = 0, DT = YUV422 8bit 09 0F 00 00 00 // SRC1 VC = 0, DT = Frame Start 09 10 00 00 00 // DST1 VC = 0, DT = Frame Start 09 11 01 00 00 // SRC2 VC = 0, DT = Frame End 09 12 01 00 00 // DST2 VC = 0, DT = Frame End ]; }; }; // Video Pipe 1 video-pipe-config-1 { status = "okay"; pipe-id = <1>; // Video Pipe 1: pipe-id = 1 pipe-idx = <2>; // Video Pipe X/Y/Z/U: 0/1/2/3 link-idx = <1>; // Link A/B/C/D: 0/1/2/3 pipe-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ // Send YUV422, FS, and FE from Video Pipe 1 to Controller 1 09 4B 07 00 00 // Enable 0/1/2 SRC/DST Mappings 09 6D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1; // For the following MSB 2 bits = VC, LSB 6 bits = DT 09 4D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit 09 4E 5e 00 00 // DST0 VC = 1, DT = YUV422 8bit 09 4F 00 00 00 // SRC1 VC = 0, DT = Frame Start 09 50 40 00 00 // DST1 VC = 1, DT = Frame Start 09 51 01 00 00 // SRC2 VC = 0, DT = Frame End 09 52 41 00 00 // DST2 VC = 1, DT = Frame End ]; }; }; // Video Pipe 2 video-pipe-config-2 { status = "okay"; pipe-id = <2>; // Video Pipe ID: 0/1/2/3/4/5/6/7 pipe-idx = <2>; // Video Pipe X/Y/Z/U: 0/1/2/3 link-idx = <2>; // Link A/B/C/D: 0/1/2/3 pipe-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ // Send YUV422, FS, and FE from Video Pipe 2 to Controller 1 09 8B 07 00 00 // Enable 0/1/2 SRC/DST Mappings 09 AD 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1; // For the following MSB 2 bits = VC, LSB 6 bits = DT 09 8D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit 09 8E 9e 00 00 // DST0 VC = 2, DT = YUV422 8bit 09 8F 00 00 00 // SRC1 VC = 0, DT = Frame Start 09 90 80 00 00 // DST1 VC = 2, DT = Frame Start 09 91 01 00 00 // SRC2 VC = 0, DT = Frame End 09 92 81 00 00 // DST2 VC = 2, DT = Frame End ]; }; }; // Video Pipe 3 video-pipe-config-3 { status = "okay"; pipe-id = <3>; // Video Pipe ID: 0/1/2/3/4/5/6/7 pipe-idx = <2>; // Video Pipe X/Y/Z/U: 0/1/2/3 link-idx = <3>; // Link A/B/C/D: 0/1/2/3 pipe-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ // Send YUV422, FS, and FE from Video Pipe 3 to Controller 1 09 CB 07 00 00 // Enable 0/1/2 SRC/DST Mappings 09 ED 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1; // For the following MSB 2 bits = VC, LSB 6 bits = DT 09 CD 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit 09 CE de 00 00 // DST0 VC = 3, DT = YUV422 8bit 09 CF 00 00 00 // SRC1 VC = 0, DT = Frame Start 09 D0 c0 00 00 // DST1 VC = 3, DT = Frame Start 09 D1 01 00 00 // SRC2 VC = 0, DT = Frame End 09 D2 c1 00 00 // DST2 VC = 3, DT = Frame End ]; }; }; }; /* VIDEO PIPE config end */ /* MIPI TXPHY config start */ mipi-txphys { status = "okay"; phy-mode = <0>; phy-force-clock-out = <1>; phy-force-clk0-en = <1>; phy-force-clk3-en = <0>; // MIPI TXPHY A: phy-id = 0 mipi-txphy-config-0 { status = "okay"; phy-id = <0>; // MIPI TXPHY ID: 0/1/2/3 phy-type = <0>; auto-deskew = <0x80>; data-lane-num = <4>; data-lane-map = <0x4>; vc-ext-en = <0>; }; // MIPI TXPHY B: phy-id = 1 mipi-txphy-config-1 { status = "okay"; phy-id = <1>; // MIPI TXPHY ID: 0/1/2/3 phy-type = <0>; auto-deskew = <0x80>; data-lane-num = <4>; data-lane-map = <0xe>; vc-ext-en = <0>; }; }; /* MIPI TXPHY config end */ /* local device extra init sequence */ extra-init-sequence { status = "disabled"; seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ // common init sequence such as fsync / gpio and so on ]; }; }; /* serdes local device end */ /* serdes remote device start */ serdes-remote-device-0 { compatible = "maxim4c,link0,max96717"; status = "okay"; remote-id = <0>; // Same as Link ID: 0/1/2/3 // Serializer i2c 7bit address remap ser-i2c-addr-def = <0x40>; ser-i2c-addr-map = <0x41>; // 0: disable remap // Camera i2c 7bit address remap cam-i2c-addr-def = <0x30>; cam-i2c-addr-map = <0x31>; // 0: disable remap port { max96712_dphy3_remote0_out: endpoint { remote-endpoint = <&max96712_dphy3_link0_in>; }; }; remote-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 03 02 10 00 00 14 17 00 00 00 14 32 7f 00 00 ]; }; }; serdes-remote-device-1 { compatible = "maxim4c,link1,max96717"; status = "okay"; remote-id = <1>; // Same as Link ID: 0/1/2/3 // Serializer i2c 7bit address remap ser-i2c-addr-def = <0x40>; ser-i2c-addr-map = <0x42>; // 0: disable remap // Camera i2c 7bit address remap cam-i2c-addr-def = <0x30>; cam-i2c-addr-map = <0x32>; // 0: disable remap port { max96712_dphy3_remote1_out: endpoint { remote-endpoint = <&max96712_dphy3_link1_in>; }; }; remote-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 03 02 10 00 00 14 17 00 00 00 14 32 7f 00 00 ]; }; }; serdes-remote-device-2 { compatible = "maxim4c,link2,max96717"; status = "okay"; remote-id = <2>; // Same as Link ID: 0/1/2/3 // Serializer i2c 7bit address remap ser-i2c-addr-def = <0x40>; ser-i2c-addr-map = <0x43>; // 0: disable remap // Camera i2c 7bit address remap cam-i2c-addr-def = <0x30>; cam-i2c-addr-map = <0x33>; // 0: disable remap port { max96712_dphy3_remote2_out: endpoint { remote-endpoint = <&max96712_dphy3_link2_in>; }; }; remote-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 03 02 10 00 00 14 17 00 00 00 14 32 7f 00 00 ]; }; }; serdes-remote-device-3 { compatible = "maxim4c,link3,max96717"; status = "okay"; remote-id = <3>; // Same as Link ID: 0/1/2/3 // Serializer i2c 7bit address remap ser-i2c-addr-def = <0x40>; ser-i2c-addr-map = <0x44>; // 0: disable remap // Camera i2c 7bit address remap cam-i2c-addr-def = <0x30>; cam-i2c-addr-map = <0x34>; // 0: disable remap port { max96712_dphy3_remote3_out: endpoint { remote-endpoint = <&max96712_dphy3_link3_in>; }; }; remote-init-sequence { seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1 reg-addr-len = <2>; // 1: 8bits, 2: 16bits reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits // reg_addr reg_val val_mask delay init-sequence = [ 03 02 10 00 00 14 17 00 00 00 14 32 7f 00 00 ]; }; }; /* serdes remote device end */ }; }; &mipi4_csi2 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; mipi4_csi2_input: endpoint@1 { reg = <1>; remote-endpoint = <&csidphy3_out>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; mipi4_csi2_output: endpoint@0 { reg = <0>; remote-endpoint = <&cif_mipi4_in>; }; }; }; }; &rkcif_mipi_lvds4 { status = "okay"; /* parameters for do cif reset detecting: * index0: monitor mode, 0 for idle, 1 for continue, 2 for trigger, 3 for hotplug (for nextchip) * index1: the frame id to start timer, min is 2 * index2: frame num of monitoring cycle * index3: err time for keep monitoring after finding out err (ms) * index4: csi2 err reference val for resetting */ rockchip,cif-monitor = <3 2 1 1000 5>; port { cif_mipi4_in: endpoint { remote-endpoint = <&mipi4_csi2_output>; }; }; }; &rkcif { status = "okay"; rockchip,android-usb-camerahal-enable; }; &rkcif_mmu { status = "okay"; }; &pinctrl { max96712-dphy3 { max96712_dphy3_pwdn: max96712-dphy3-pwdn { rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_output_low>; }; max96712_dphy3_errb: max96712-dphy3-errb { rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none_smt>; }; max96712_dphy3_lock: max96712-dphy3-lock { rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none_smt>; }; }; };