/ {


        vcc_camera: vcc-camera-regulator {
                compatible = "regulator-fixed";
                /**
                 * gpio config please refer to main dts if have
                 
                 * gpio = <&gpio* *** GPIO_ACTIVE_HIGH>;
                 * pinctrl-names = "default";
                 * pinctrl-0 = <&***>;
                 */
                regulator-name = "vcc_camera";
                enable-active-high;
                regulator-always-on;
                regulator-boot-on;
        };


};

&i2c4 {
        status = "okay";
        gc2093: gc2093@37 {
                compatible = "galaxycore,gc2093";
                status = "okay";
                reg = <0x37>;
                clocks = <&cru CLK_CIF_OUT>;
                clock-names = "xvclk";
                power-domains = <&power RK3568_PD_VI>;
                /**
                 * gpio config please refer to main dts if have
                 
                 * pinctrl-names = "default";
                 * pinctrl-0 = <&cif_clk>;
                 * pwdn-gpios = <&gpio* *** GPIO_ACTIVE_HIGH>;
                 * reset-gpios = <&gpio* *** GPIO_ACTIVE_LOW>;
                 */
                //avdd-supply = <&vcc_avdd>;
                //dovdd-supply = <&vcc_dovdd>;
                //dvdd-supply = <&vcc_dvdd>;
                rockchip,camera-module-index = <0>;
                rockchip,camera-module-facing = "back";
                rockchip,camera-module-name = "SIDB205300385-VA";
                rockchip,camera-module-lens-name = "default";
                port {
                        ucam_out0: endpoint {
                                remote-endpoint = <&mipi_in_ucam0>;
                                data-lanes = <1 2>;
                        };
                };
        };
};


&rkisp {
        status = "okay";
};

&rkisp_mmu {
        status = "okay";
};

&rkisp_vir0 {
        status = "okay";

        port {
                #address-cells = <1>;
                #size-cells = <0>;

                isp0_in: endpoint@0 {
                        reg = <0>;
                        remote-endpoint = <&csidphy_out>;
                };
        };
};

&csi2_dphy_hw {
        status = "okay";
};



&csi2_dphy1 {
        status = "okay";

        ports {
                #address-cells = <1>;
                #size-cells = <0>;
                port@0 {
                        reg = <0>;
                        #address-cells = <1>;
                        #size-cells = <0>;

                        mipi_in_ucam0: endpoint@1 {
                                reg = <1>;
                                remote-endpoint = <&ucam_out0>;
                                data-lanes = <1 2>;
                        };
              };
                port@1 {
                        reg = <1>;
                        #address-cells = <1>;
                        #size-cells = <0>;

                        csidphy_out: endpoint@0 {
                                reg = <0>;
                                remote-endpoint = <&isp0_in>;
                        };
                };
        };
};