#define RP_SINGLE_LCD &rpdzkj { compatible = "rp_config"; user_version = "rpdzkj"; system_rotate = "90"; csi_camera_rotate = "0"; //all csi camera rotation //0 90 180 270 //no effect csi_camera_facing = "0"; //0:auto 1:all front 2:all back //no effect usb_camera_rotate = "0"; //all usb camera rotation //0 90 180 270 usb_camera_facing = "0"; //0:auto 1:all front 2:all back lcd_density = "320"; language = "zh-CN"; //zh-CN //en-US time_zone = "Asia/Shanghai"; //Asia/Shanghai = +8 //Europe/London = +1 //Africa/Casablanca = +0; not_navigation_bar = "false"; not_status_bar = "false"; default_launcher = "true"; has_root = "true"; usb_not_permission = "true"; gps_use = "false"; gps_serial_port = "/dev/ttyS4"; primary_device = "DSI"; extend_device = "HDMI-A"; extend_rotate = "0";//0 0//1 90 //2 180 //3 270 rotation_efull = "false"; extend_rotate_2 = "0";//0 0//1 90 //2 180 //3 270 rotation_efull_2 = "true"; extend_rotate_3 = "0";//0 0//1 90 //2 180 //3 270 rotation_efull_3 = "true"; home_apk = "null"; status = "okay"; }; &dsi { status = "okay"; rockchip,lane-rate = <940>; dsi_panel: panel@0 { status = "okay"; compatible = "aoly,sl008pa21y1285-b00","simple-panel-dsi"; reg = <0>; reset-delay-ms = <60>; init-delay-ms = <60>; enable-delay-ms = <120>; prepare-delay-ms = <120>; dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>; dsi,format = ; dsi,lanes = <4>; /** * power-supply = <>; * reset-gpios = <>; * * lcd reset pin and power supply * please refer to ***-lcd-gpio.dtsi * that included in main dts. */ panel-init-sequence = [ 05 78 01 11 05 78 01 29 ]; panel-exit-sequence = [ 05 78 01 28 05 78 01 10 ]; disp_timings0: display-timings { native-mode = <&dsi_timing0>; dsi_timing0: timing0 { clock-frequency = <148000000>; hactive = <1200>; vactive = <1920>; hback-porch = <60>; hfront-porch = <80>; vback-porch = <25>; vfront-porch = <35>; hsync-len = <1>; vsync-len = <1>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; panel_in_dsi: endpoint { remote-endpoint = <&dsi_out_panel>; }; }; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; dsi_out_panel: endpoint { remote-endpoint = <&panel_in_dsi>; }; }; }; }; &dsi_in_vp0 { status = "okay"; }; &video_phy { status = "okay"; }; &route_dsi { status = "okay"; connect = <&vp0_out_dsi>; }; >9xx { status = "okay"; compatible = "goodix,gt9xx"; reg = <0x5d>; gtp_resolution_x = <1200>; gtp_resolution_y = <1920>; gtp_int_tarigger = <1>; gtp_change_x2y = <0>; gtp_overturn_x = <0>; gtp_overturn_y = <0>; gtp_send_cfg = <1>; gtp_touch_wakeup = <1>; /** * goodix_rst_gpio = <>; * goodix_irq_gpio = <>; * * touch panel interrupt and reset pin * please refer to ***-lcd-gpio.dtsi * that included in main dts. */ goodix,cfg-group0 = [ 5E B0 04 80 07 05 05 00 01 0F 28 05 50 32 03 05 00 00 00 00 00 00 00 00 00 00 00 8C 2C 0E 52 54 31 0D 00 00 01 80 04 1C 00 00 00 00 00 03 64 32 00 00 00 52 66 94 C5 02 07 00 00 04 83 53 00 82 57 00 80 5B 00 7F 5F 00 7E 63 00 7E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1C 1A 18 16 14 12 10 0E 0C 0A 08 06 04 02 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 02 04 06 08 0A 0C 0F 10 12 13 14 28 26 24 22 21 20 1F 1E 1D 1C 18 16 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 22 01 ]; goodix,cfg-group2 = [ 00 20 03 00 05 0A 05 00 01 08 28 05 50 32 03 05 00 00 00 00 00 00 00 00 00 00 00 8C 2C 0E 17 15 31 0D 00 00 01 BA 03 1D 00 00 00 00 00 03 64 32 00 00 00 0F 41 94 C5 02 07 00 00 04 99 11 00 77 17 00 5F 1F 00 4C 2A 00 41 38 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1C 1A 18 16 14 12 10 0E 0C 0A 08 06 04 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 26 24 22 21 20 1F 1E 1D 1C 18 16 00 02 04 06 08 0A 0C 0F 10 12 13 14 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FE 01 ]; };