/dts-v1/;

#include "rp-rk3399-board.dtsi"

#include "rp-usb2-host0.dtsi"
#include "rp-usb2-host1.dtsi"
//#include "rp-usb3-otg-typeA.dtsi"
#include "rp-usb3-otg-typeC.dtsi"
#include "rp-usb3_1-host.dtsi"


#include "rp-audio-rt5651.dtsi"
#include "rp-pmu-rk808.dtsi"


#include "rp-gpio-key.dtsi"
#include "rp-adc-key.dtsi"
      
#include "rp-mipi-ov13850-camera.dtsi"
//#include "rp-hdmiin.dtsi"

#include "rp-wifi-sdio.dtsi" 
#include "rp-bt-uart0.dtsi" 

#include "rp-sdcard-mmc1.dtsi"
#include "rp-gmac.dtsi"

#include "rp-lcd-hdmi.dtsi"
//#include "rp-lcd-mipi-5-720-1280.dtsi"
//#include "rp-lcd-mipi-5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi-5.5-720-1280.dtsi"
//#include "rp-lcd-mipi-5.5-1080-1920.dtsi"
//#include "rp-lcd-mipi-5.5-720-1280-v2.dtsi"
#include "rp-lcd-mipi-7-1024-600.dtsi"
//#include "rp-lcd-mipi-7-800-1280.dtsi"
//#include "rp-lcd-mipi-7-1200-1920.dtsi"
//#include "rp-lcd-mipi-8-800-1280.dtsi"
//#include "rp-lcd-mipi-8-800-1280-new.dtsi"
//#include "rp-lcd-mipi-10-800-1280.dtsi"
//#include "rp-lcd-mipi-10-1920-1200.dtsi"
//#include "rp-lcd-edp-13.3-1920-1080.dtsi"



/ {

        model = "king-rk3399";
        compatible = "rockchip,rk3399-excavator-linux", "rockchip,rk3399";

	fan_gpio_control {
            compatible = "fan_gpio_control";
            gpio-pin = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
            thermal-zone = "cpu-thermal";
            threshold-temp = <60000>; //60C
            running-time = <10000>; //10s
            status = "okay";
        };
        
        rp_power{
            compatible = "rp_power";

            rp_not_deep_sleep = <1>;
            status = "okay";

            /* 
         * #define GPIO_FUNCTION_OUTPUT 0
         * #define GPIO_FUNCTION_INPUT 1
         * #define GPIO_FUNCTION_IRQ 2
         * #define GPIO_FUNCTION_FLASH 3
         * #define GPIO_FUNCTION_OUTPUT_CTRL 4 //output and creat proc ctrl
         * 
         * you can define the gpio function as above
         * on gpio_function = <>;
     *
     *If you want to set the uboot to high level, add the lower properties
     *    regulator_uboot_on    
         */        
            
            breathe-led { //run led
                gpio_num = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
                gpio_function = <3>;
                regulator_uboot_on;
            };
            
            power_en { 
                gpio_num = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
                gpio_function = <4>;
                regulator_uboot_on;
            }; 
            
            hub_rst { 
                gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
                gpio_function = <4>;
                regulator_uboot_on;
            }; 
            
            //fan_open { 
            //    gpio_num = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
            //    gpio_function = <4>;
            //    regulator_uboot_on;
           // }; 
            
            gsm_power_en { 
                gpio_num = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
                gpio_function = <4>;
                regulator_uboot_on;
            }; 
        };

        rp_gpio{
                status = "okay";
                compatible = "rp_gpio";
                base_value = <0>; //3288_5.1 = 0   3288_7.1.2 = 992  3288_ubuntu = 992   3399_7.1.2 = 1000 3399_ubuntu = 0  

        gpio4c5 {
                    gpio_num = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;            //0:output，1:input
                };

	gpio4d5 {
                    gpio_num = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
                    gpio_function = <0>;
            };

    };
};

&spi1 {
	status = "disabled";
	max-freq = <50000000>;
	spi_test:spi_test@0 {
	     status = "okay";
	     compatible = "rockchip,spidev";
	     reg = <0>;
	     spi-max-frequency = <4000000>;
	     spi-cpha;
	     spi-cpol;
	     cs-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
	                    };
      };

&io_domains {
        status = "okay";
        bt656-supply = <&vcc_1v8>;              /* bt656_gpio2ab_ms */
        audio-supply = <&vcca1v8_codec>;        /* audio_gpio3d4a_ms */
        sdmmc-supply = <&vcc_sdio>;             /* sdmmc_gpio4b_ms */
        gpio1830-supply = <&vcc_3v0>;           /* gpio1833_gpio4cd_ms */
};

&pmu_io_domains {
        status = "okay";
        pmu1830-supply = <&vcc_1v8>;     //king usb
};

//used to bluetooth
//&uart0 {
//        status = "okay";
        //dma-names = "tx", "rx";
        //dmas = <&dmac_peri 0>, <&dmac_peri 1>;
//};

//conflicts to ethernet
&uart1 {
        status = "disabled";
        //dma-names = "tx", "rx";
        //dmas = <&dmac_peri 2>, <&dmac_peri 3>;
};

//conflicts to debugger
&uart2 { 
        status = "disabled";
        //dma-names = "tx", "rx";
        //dmas = <&dmac_peri 4>, <&dmac_peri 5>;
};

//conflicts to ethernet
&uart3 {
        status = "disabled";
        //dma-names = "tx", "rx";
        //dmas = <&dmac_peri 6>, <&dmac_peri 7>;
};

&uart4 {
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&uart4_xfer>;
        dma-names = "tx", "rx";
        dmas = <&dmac_peri 8>, <&dmac_peri 9>;
};

&fiq_debugger {
        rockchip,serial-id = <2>; //uart2
        rockchip,wake-irq = <0>;
        rockchip,irq-mode-enable = <1>;
        compatible = "rockchip,fiq-debugger";
        rockchip,baudrate = <115200>;
        pinctrl-names = "default";
        pinctrl-0 = <&uart2c_xfer>;
};