// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2022 Rockchip Electronics Co., Ltd. * */ //#include "../rk3562-evb1-lp4x-v10.dtsi" //#include "../rk3562-android.dtsi" //#include "../rk3562-rk817.dtsi" #include #include "rk3562-evb-rpdzkj-rk817-pwm.dtsi" #include "../rk3562-linux.dtsi" /*** usb ***/ #include "rp-usb-rk3562.dtsi" /*************************adc key***********************/ #include "rp-adc-key.dtsi" /* camera */ //#include "rp-mipi-camera0-rk3562.dtsi" //#include "rp-mipi-camera1-rk3562.dtsi" #include "rp-mipi-camera-3562-dual-gc8034-ov13855.dtsi" /* ethernet */ #include "rp-eth-gmac.dtsi" #include "rp-eth-pcie2gmac-rk3562.dtsi" /* wifi/bt */ #include "rp-wifi-bt-vs2275s-rk3562.dtsi" /***************** SINGLE LCD ****************/ #include "pro-rk3562-single-lcd-gpio.dtsi" // gpio config of lcd /* MIPI to HDMI */ //#include "rp-lcd-mipi2hdmi-lt8912.dtsi" /* MIPI DSI */ //#include "rp-lcd-mipi-5-720-1280-v2-boxTP.dtsi" //#include "rp-lcd-mipi-5.5-720-1280-v2.dtsi" //#include "rp-lcd-mipi-7-720-1280.dtsi" #include "rp-lcd-mipi-7-1024-600.dtsi" //#include "rp-lcd-mipi-7-1200-1920.dtsi" //#include "rp-lcd-mipi-8-800-1280-v3.dtsi" //#include "rp-lcd-mipi-8-1200-1920.dtsi" //#include "rp-lcd-mipi-10-800-1280-v3.dtsi" //#include "rp-lcd-mipi-10-1200-1920.dtsi" /* LVDS DSI */ //#include "rp-lcd-lvds-7-1024-600.dtsi" //#include "rp-lcd-lvds-10-1280-800.dtsi" /{ model = "lga-rk3562"; compatible = "rpdzkj,lga-rk3562-v10", "rockchip,rk3562"; /* fan_gpio_control { compatible = "fan_gpio_control"; gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; temperature-device = "soc-thermal"; temp-on = <60000>; time = <10000>; status = "okay"; }; */ vdd_3v3_5v_control: vdd-3v3-5v-control { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_5v_control"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; //In the uboot phase fixed.c resolves gpio gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vdd_control>; }; rp_power{ status = "okay"; compatible = "rp_power"; rp_not_deep_sleep = <1>; // pinctrl-names = "default"; // pinctrl-0 = <&vcc5v0_host_en>; // pinctrl-1 = <&vcc5v0_otg_en>; //#define GPIO_FUNCTION_OUTPUT 0 //#define GPIO_FUNCTION_INPUT 1 //#define GPIO_FUNCTION_IRQ 2 //#define GPIO_FUNCTION_FLASH 3 //#define GPIO_FUNCTION_OUTPUT_CTRL 4 led { //system led gpio_num = <&nca9555_gpio IO_00 GPIO_ACTIVE_HIGH>; gpio_function = <3>; }; vdd_4g { gpio_num = <&nca9555_gpio IO_15 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; usb_pwr { gpio_num = <&nca9555_gpio IO_03 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; hub_rst { //usb hub gpio_num = <&nca9555_gpio IO_02 GPIO_ACTIVE_LOW>; gpio_function = <4>; }; spk_en { //spk enable gpio_num = <&nca9555_gpio IO_14 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; spk_mute { //spk mute gpio_num = <&nca9555_gpio IO_17 GPIO_ACTIVE_LOW>; gpio_function = <4>; }; wifi_pwr { gpio_num = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; // WIFI,poweren_gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; // fan { //fan // gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; // gpio_function = <4>; // }; }; rp_gpio{ status = "okay"; compatible = "rp_gpio"; nca9555_01 { gpio_num = <&nca9555_gpio IO_01 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555_15 { gpio_num = <&nca9555_gpio IO_15 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555_16 { gpio_num = <&nca9555_gpio IO_16 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555_17 { gpio_num = <&nca9555_gpio IO_17 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_00 { gpio_num = <&nca9555b_gpio IO_00 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_01 { gpio_num = <&nca9555b_gpio IO_01 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_02 { gpio_num = <&nca9555b_gpio IO_02 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_03 { gpio_num = <&nca9555b_gpio IO_03 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_04 { gpio_num = <&nca9555b_gpio IO_04 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_05 { gpio_num = <&nca9555b_gpio IO_05 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_06 { gpio_num = <&nca9555b_gpio IO_06 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_07 { gpio_num = <&nca9555b_gpio IO_07 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_10 { gpio_num = <&nca9555b_gpio IO_10 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_11 { gpio_num = <&nca9555b_gpio IO_11 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_12 { gpio_num = <&nca9555b_gpio IO_12 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_13 { gpio_num = <&nca9555b_gpio IO_13 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_14 { gpio_num = <&nca9555b_gpio IO_14 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_15 { gpio_num = <&nca9555b_gpio IO_15 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_16 { gpio_num = <&nca9555b_gpio IO_16 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; nca9555b_17 { gpio_num = <&nca9555b_gpio IO_17 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; }; /** 24M osc clock to mcp2515 */ osc_24m: osc24m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; fiq-debugger { compatible = "rockchip,fiq-debugger"; rockchip,serial-id = <0>; rockchip,wake-irq = <0>; /* If enable uart uses irq instead of fiq */ rockchip,irq-mode-enable = <1>; rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; }; &i2c1 { status = "okay"; rtc@51 { status = "okay"; compatible = "rtc,hym8563"; reg = <0x51>; }; nca9555: mfd-gpio@20 { compatible = "nca9555"; reg = <0x20>; status = "okay"; nca9555_gpio: gpio-normal@20 { compatible = "nca9555-gpio"; gpio-controller; #gpio-cells = <2>; }; }; nca9555b: mfd-gpio@21 { compatible = "nca9555"; reg = <0x21>; status = "okay"; nca9555b_gpio: gpio-normal@21 { compatible = "nca9555-gpio"; gpio-controller; #gpio-cells = <2>; }; }; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; }; /*** RS232 ***/ &uart2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart2m1_xfer>; }; &uart3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart3m0_xfer>; }; /*** TTL ***/ &uart4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart4m0_xfer>; }; &uart5 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart5m1_xfer>; }; &uart6 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart6m0_xfer>; }; /* RS485 */ &uart7 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart7m0_xfer>; }; //&rk_headset { // status = "okay"; // pinctrl-names = "default"; // pinctrl-0 = <&hp_det>; // headset_gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; //}; //&spi0 { // status = "okay"; // // spi_dev@0 { // compatible = "rockchip,spidev"; // reg = <0>; // spi-max-frequency = <12000000>; // spi-lsb-first; // }; //}; &spi0 { status = "okay"; /* rewrite pinctrl, for cs1 used to be gpio */ pinctrl-0 = <&spi0m0_csn0 &spi0m0_pins>; spi2can: mcp2515@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&osc_24m>; interrupt-parent = <&gpio0>; interrupts = ; // vdd-supply = <®5v0>; // xceiver-supply = <®5v0>; gpio-controller; spi-max-frequency = <10000000>; }; }; /******** must be close,if not system no run ******/ &dmc { center-supply = <&vdd_logic>; status = "disabled"; }; &dfi { status = "disabled"; }; &rk817 { battery { compatible = "rk817,battery"; status = "okay"; ocv_table = <3300 3337 3374 3411 3447 3485 3524 3561 3598 3635 3672 3709 3746 3785 3822 3859 3896 3933 3970 4007 4050>; design_capacity = <5000>; design_qmax = <5500>; bat_res = <100>; sleep_enter_current = <300>; sleep_exit_current = <300>; sleep_filter_current = <100>; power_off_thresd = <3300>; zero_algorithm_vol = <3850>; max_soc_offset = <60>; monitor_sec = <5>; sample_res = <10>; virtual_power = <0>; //test mode, 1 to force report 66% //rpdzkj add Mandatory configuration under the condition of no battery, the power connected to external DC is 0, and 50% is reported dc_rpdzkj_psy = <1>; //强制配置无电池情况下接外部DC电量为0上报50% 1:enable 0:not }; charger { compatible = "rk817,charger"; status = "okay"; min_input_voltage = <4500>; max_input_current = <3000>;//1500 max_chrg_current = <1000>;//2000 max_chrg_voltage = <4350>; chrg_term_mode = <0>; chrg_finish_cur = <300>; virtual_power = <0>; dc_det_adc = <0>; // extcon = <&u2phy>; //otg charging gate_function_disable = <1>; //power_dc2otg = <1>; //dc_det_gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; //可配置pins 读取dc转3.3V以下电压做dc充电检测脚 //rpdzkj add Configure external DC to detect and report charging status rpdzkj_dc_vbus = <1>; //配置外部DC检测上报充电状态 1:enable 0:not }; }; &pinctrl { power_control{ vdd_control: vdd-control { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; // headphone { // hp_det: hp-det { // rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; // }; // }; };