#include #include "rp-lcd-hdmi.dtsi" #define RP_TRIPLE_LCD &lvds_panel { status = "okay"; compatible = "simple-panel"; enable-delay-ms = <20>; prepare-delay-ms = <20>; unprepare-delay-ms = <20>; disable-delay-ms = <20>; bus-format = ; width-mm = <217>; height-mm = <136>; /** * power-supply = <>; * reset-gpios = <>; * * lcd reset pin and power supply * please refer to ***-lcd-gpio.dtsi * that included in main dts. */ display-timings { native-mode = <&timing2>; timing2: timing2 { clock-frequency = <45000000>; hactive = <1024>; vactive = <600>; hback-porch = <160>; hfront-porch = <160>; vback-porch = <23>; vfront-porch = <12>; hsync-len = <20>; vsync-len = <3>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dual-lvds-even-pixels; panel_in_lvds: endpoint { remote-endpoint = <&lvds_out_panel>; }; }; }; }; &lvds { status = "okay"; ports { port@1 { reg = <1>; lvds_out_panel: endpoint { remote-endpoint = <&panel_in_lvds>; }; }; }; }; &edp_panel { status = "okay"; compatible = "simple-panel"; prepare-delay-ms = <20>; enable-delay-ms = <20>; disable-delay-ms = <20>; unprepare-delay-ms = <20>; /** * power-supply = <>; * reset-gpios = <>; * * lcd reset pin and power supply * please refer to ***-lcd-gpio.dtsi * that included in main dts. */ display-timings { native-mode = <&timing1>; timing0: timing0 {//EDP 13.3 clock-frequency = <150000000>; hactive = <1920>; vactive = <1080>; hfront-porch = <12>; hsync-len = <16>; hback-porch = <48>; vfront-porch = <8>; vsync-len = <4>; vback-porch = <8>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; timing1: timing1 {// EDP 15.6 LP156WF6 clock-frequency = <138000000>; hactive = <1920>; vactive = <1080>; hfront-porch = <48>; hsync-len = <32>; hback-porch = <80>; vfront-porch = <3>; vsync-len = <5>; vback-porch = <23>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; }; ports { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; }; }; &edp { //hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; status = "okay"; force-hpd; ports { port@1 { reg = <1>; edp_out_panel: endpoint { remote-endpoint = <&panel_in_edp>; }; }; }; }; &dsi0_in_vp0 { status = "disabled"; }; &dsi0_in_vp1 { status = "disabled"; }; &dsi1_in_vp0 { status = "disabled"; }; &dsi1_in_vp1 { status = "disabled"; }; &lvds_in_vp1 { status = "disabled"; }; &lvds_in_vp2 { status = "okay"; }; &edp_in_vp0 { status = "disabled"; }; &edp_in_vp1 { status = "okay"; }; &video_phy0 { status = "okay"; }; &edp_phy { status = "okay"; }; &route_hdmi { status = "okay"; connect = <&vp0_out_hdmi>; }; &route_lvds { /****** * cannot enable cause of resolution is different from other two device, * otherwish, the lvds will abnormal after into bootanimotaion. *******/ status = "disabled"; connect = <&vp2_out_lvds>; }; &route_edp { status = "okay"; connect = <&vp1_out_edp>; }; >9xx { status = "okay"; compatible = "goodix,gt9xx"; reg = <0x5d>; gtp_resolution_x = <1024>; gtp_resolution_y = <600>; gtp_int_tarigger = <1>; gtp_change_x2y = <0>; gtp_overturn_x = <0>; gtp_overturn_y = <0>; gtp_send_cfg = <1>; gtp_touch_wakeup = <1>; /** * goodix_rst_gpio = <>; * goodix_irq_gpio = <>; * * touch panel interrupt and reset pin * please refer to ***-lcd-gpio.dtsi * that included in main dts. */ goodix,cfg-group0 = [ 5A 00 04 58 02 05 3D 00 01 08 32 0F 5A 32 03 05 00 00 00 00 02 00 00 18 1A 1E 14 87 29 0A 55 57 B5 06 00 00 00 20 33 1C 14 01 00 0F 00 2B FF 7F 19 46 32 3C 78 94 D5 02 08 00 00 04 98 40 00 8A 4A 00 80 55 00 77 61 00 6F 70 00 6F 00 00 00 00 F0 40 30 FF FF 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 04 06 08 0A 0C 0E 10 12 14 FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 04 06 08 0A 0C 1D 1E 1F 20 21 22 24 26 28 29 2A FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6F 01 ]; };