#include "rp-lcd-hdmi.dtsi"
#define RP_SINGLE_LCD



&dsi0 {
    status = "okay";
    // rockchip,lane-rate = <480>;
    dsi0_panel:panel@0 {
        status = "okay";
        compatible = "simple-panel-dsi";
        reg = <0>;
        dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
        MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
        dsi,format = <MIPI_DSI_FMT_RGB888>;
        dsi,lanes = <4>;
        reset-delay-ms = <20>;
        init-delay-ms = <20>;
        enable-delay-ms = <120>;
        prepare-delay-ms = <120>;
        
        /**
         * power-supply = <>;
         * reset-gpios = <>;
         *
         * lcd reset pin and power supply
         * please refer to ***-lcd-gpio.dtsi
         * that included in main dts.
         */
        
        panel-init-sequence = [
            15 00 02 FE 00
            15 00 02 C2 08
            15 00 02 35 00
            15 00 02 53 20
            15 00 02 51 FF
            
            05 78 01 01    //add for reboot init fail
            
            05 78 01 29
            05 78 01 11
        ];

        panel-exit-sequence = [
            05 00 01 28
            05 78 01 10
        ];

        disp_timings0: display-timings {
            native-mode = <&dsi0_timing0>;
            dsi0_timing0:timing0 {
                clock-frequency = <138000000>;
                hactive = <1080>;
                vactive = <1920>;
                hback-porch = <30>;
                hfront-porch = <36>;
                vback-porch = <6>;
                vfront-porch = <6>;
                hsync-len = <4>;
                vsync-len = <2>;
                hsync-active = <0>;
                vsync-active = <0>;
                de-active = <0>;
                pixelclk-active = <0>;
            };
        };

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                panel_in_dsi:endpoint {
                    remote-endpoint = <&dsi_out_panel>;
                };
            };
        };
    };

    ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port@1 {
            reg = <1>;
            dsi_out_panel:endpoint {
                remote-endpoint = <&panel_in_dsi>;
            };
        };
    };

};


&dsi0_in_vp0 {
    status = "disabled";
};

&dsi0_in_vp1 {
    status = "okay";
};

&video_phy0 {
    status = "okay";
};

&route_dsi0 {
    status = "okay";
    connect = <&vp1_out_dsi0>;
};


&gt9xx {
    status = "okay";
    compatible = "goodix,gt9xx";
    reg = <0x5d>;
    gtp_resolution_x = <1080>;
    gtp_resolution_y = <1920>;
    gtp_int_tarigger = <1>;
    gtp_change_x2y = <0>;
    gtp_overturn_x = <0>;
    gtp_overturn_y = <0>;
    gtp_send_cfg = <1>;
    gtp_touch_wakeup = <1>;

    /**
     * goodix_rst_gpio = <>;
     * goodix_irq_gpio = <>;
     *
     * touch panel interrupt and reset pin
     * please refer to ***-lcd-gpio.dtsi
     * that included in main dts.
     */

    goodix,cfg-group0 = [
        47 38 04 80 07 0A 05 00 
        01 08 28 05 50 32 03 05 
        00 00 00 00 00 00 00 00 
        00 00 00 8B 2B 0D 17 15 
        31 0D 00 00 00 9A 03 2D 
        00 00 00 00 00 03 64 32 
        00 00 00 0F 2C 94 C5 02 
        07 00 00 04 9E 10 00 82 
        14 00 6B 19 00 57 20 00 
        4A 27 00 4A 00 00 00 00 
        00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 
        1A 18 16 14 12 10 0E 0C 
        0A 08 06 04 02 FF 00 00 
        00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 02 
        04 06 08 0A 0C 0F 10 12 
        13 26 24 22 21 20 1F 1E 
        1D 1C 18 16 FF FF FF FF 
        00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 
        8C 01
    ];    
};