#define RP_SINGLE_LCD
#include "rp-lcd-hdmi.dtsi"


&dsi0 {
    status = "okay";
    //rockchip,lane-rate = <480>;
    
    dsi0_panel: panel@0 {
        status = "okay";
        compatible = "simple-panel-dsi";
        reg = <0>;
        reset-delay-ms = <60>;
        init-delay-ms = <60>;
        enable-delay-ms = <60>;
        prepare-delay-ms = <60>;
        unprepare-delay-ms = <60>;
        disable-delay-ms = <60>;
        dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
            MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
        dsi,format = <MIPI_DSI_FMT_RGB888>;
        dsi,lanes  = <4>;
        
        /**
         * power-supply = <>;
         * reset-gpios = <>;
         *
         * lcd reset pin and power supply
         * please refer to ***-lcd-gpio.dtsi
         * that included in main dts.
         */
        
        panel-init-sequence = [
            05 78 01 11    //sleep out
            05 20 01 29    //display on
        ];

        panel-exit-sequence = [
                05 00 01 28
                05 78 01 10
        ];

        disp_timings0: display-timings {
            native-mode = <&dsi0_timing0>;
            dsi0_timing0: timing0 {
                    clock-frequency = <82000000>;
                    hactive = <800>;
                    vactive = <1280>;
                    hback-porch = <100>;
                    hfront-porch = <100>;
                    vback-porch = <30>;
                    vfront-porch = <20>;
                    hsync-len = <30>;
                    vsync-len = <2>;
                    hsync-active = <0>;
                    vsync-active = <0>;
                    de-active = <0>;
                    pixelclk-active = <0>;
            };
        };

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                panel_in_dsi: endpoint {
                    remote-endpoint = <&dsi_out_panel>;
                };
            };
        };
    };

    ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port@1 {
            reg = <1>;
            dsi_out_panel: endpoint {
                remote-endpoint = <&panel_in_dsi>;
            };
        };
    };

};




&dsi0_in_vp0 {
    status = "disabled";
};

&dsi0_in_vp1 {
    status = "okay";
};


&video_phy0 {
    status = "okay";
};


&route_dsi0 {
    status = "okay";
    connect = <&vp1_out_dsi0>;
};

    
&gt9xx {
    status = "okay";
    compatible = "goodix,gt9xx";
    reg = <0x5d>;
    gtp_resolution_x = <800>;
    gtp_resolution_y = <1280>;
    gtp_int_tarigger = <1>;
    gtp_change_x2y = <0>;
    gtp_overturn_x = <0>;
    gtp_overturn_y = <0>;
    gtp_send_cfg = <1>;
    gtp_touch_wakeup = <1>;

    /**
     * goodix_rst_gpio = <>;
     * goodix_irq_gpio = <>;
     *
     * touch panel interrupt and reset pin
     * please refer to ***-lcd-gpio.dtsi
     * that included in main dts.
     */

    goodix,cfg-group2 = [
        49 20 03 00 05 0A 35 00 01 06 23 08 
        37 2D 03 05 00 00 00 00 00 00 04 17 
        19 1D 14 90 30 AA 53 55 0C 08 00 00 
        00 01 03 1C 00 00 00 00 00 00 00 00 
        00 00 00 3C 78 94 D0 42 00 08 00 04 
        8E 40 00 85 4A 00 7F 55 00 7B 61 00 
        7A 70 00 7B 00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 00 00 00 00 
        00 00 00 00 00 00 00 00 00 00 00 00 
        00 00 00 00 19 18 17 16 15 14 11 10 
        0F 0E 0D 0C 09 08 07 06 05 04 01 00 
        FF FF FF FF FF FF FF FF FF FF 00 02 
        04 06 07 08 0A 0C 0D 0E 0F 10 11 12 
        13 14 2A 29 28 27 26 25 24 23 22 21 
        20 1F 1E 1C 1B 19 FF FF FF FF FF FF 
        FF FF FF FF 24 01
    ];    
};