#include "rp-lcd-hdmi.dtsi"
#define RP_SINGLE_LCD





&dsi0 {
    status = "okay";
    rockchip,lane-rate = <1200>;
    dsi0_panel: panel@0 {
        status = "okay";
        compatible = "simple-panel-dsi";
        reg = <0>;
    //    reset-delay-ms = <60>;
    //    init-delay-ms = <60>;
        enable-delay-ms = <160>;
        prepare-delay-ms = <200>;
    //    unprepare-delay-ms = <60>;
    //    disable-delay-ms = <60>;
                dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
                                MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
                dsi,format = <MIPI_DSI_FMT_RGB888>;

        dsi,lanes  = <4>;
        
        /**
         * power-supply = <>;
         * reset-gpios = <>;
         *
         * lcd reset pin and power supply
         * please refer to ***-lcd-gpio.dtsi
         * that included in main dts.
         */
        
        disp_timings0: display-timings {
            native-mode = <&dsi0_timing0>;
            dsi0_timing0: timing0 {
                                clock-frequency = <130000000>;
                                hactive = <1920>;
                                vactive = <1200>;
                                hback-porch = <60>;    //60
                                hfront-porch = <16>;    //16
                                vback-porch = <23>;    //23
                                vfront-porch = <12>;    //12
                                hsync-len = <20>;    //20
                                vsync-len = <3>;    //3
                                de-active = <1>;
                                hsync-active = <1>;
                                vsync-active = <1>;
                                pixelclk-active = <1>;

            };
        };

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                panel_in_dsi: endpoint {
                    remote-endpoint = <&dsi_out_panel>;
                };
            };
        };
    };

    ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port@1 {
            reg = <1>;
            dsi_out_panel: endpoint {
                remote-endpoint = <&panel_in_dsi>;
            };
        };
    };

};

&dsi0_in_vp0 {
    status = "disabled";
};

&dsi0_in_vp1 {
    status = "okay";
};

&video_phy0 {
    status = "okay";
};

&route_dsi0 {
    status = "okay";
    connect = <&vp1_out_dsi0>;
};


&gt9xx {
    status = "okay";
    compatible = "goodix,gt9xx";
    reg = <0x5d>;
    gtp_resolution_x = <1920>;
    gtp_resolution_y = <1200>;
    gtp_int_tarigger = <1>;
    gtp_change_x2y = <0>;
    gtp_overturn_x = <0>;
    gtp_overturn_y = <0>;
    gtp_send_cfg = <1>;
    gtp_touch_wakeup = <1>;

    /**
     * goodix_rst_gpio = <>;
     * goodix_irq_gpio = <>;
     *
     * touch panel interrupt and reset pin
     * please refer to ***-lcd-gpio.dtsi
     * that included in main dts.
     */

    goodix,cfg-group0 = [
        55 80 07 B0 04 0A 3D 00 01 08 28
        05 50 32 03 05 00 00 00 00 00 00
        00 18 1A 1E 14 8E 2F 99 17 15 31
        0D 00 00 02 9B 03 1D 00 00 00 00
        00 00 00 00 00 00 00 1E 78 94 C5
        02 08 00 00 00 5B 22 00 4C 2D 00
        41 3C 00 38 4F 00 32 69 00 32 00
        00 00 00 00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00 00 00 00
        00 00 00 01 04 05 06 07 08 09 0C
        0D 0E 0F 10 11 14 15 16 17 FF FF
        00 00 00 00 00 00 00 00 00 00 00
        02 04 06 07 08 0A 0C 0D 0F 10 11
        12 13 19 1B 1C 1E 1F 20 21 22 23
        24 25 26 27 28 29 FF FF FF 00 00
        00 00 00 00 00 00 00 00 6B 01];
};