#include "rp-lcd-hdmi.dtsi"
#define RP_SINGLE_LCD




&dsi0 {
    status = "okay";
    rockchip,lane-rate = <480>;
    dsi0_panel: panel@0 {
        status = "okay";
        compatible = "simple-panel-dsi";
        reg = <0>;
                reset-delay-ms = <20>;
        init-delay-ms = <20>;
        enable-delay-ms = <120>;
                prepare-delay-ms = <120>;
                dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
                                MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
        dsi,format = <MIPI_DSI_FMT_RGB888>;
        dsi,lanes  = <4>;
        
        /**
         * power-supply = <>;
         * reset-gpios = <>;
         *
         * lcd reset pin and power supply
         * please refer to ***-lcd-gpio.dtsi
         * that included in main dts.
         */
        
        panel-init-sequence = [
            39 00 04 B9 F1 12 83
                39 00 1C BA 33 81 05 F9 0E 0E 20 00 00 00 00 00 00 00 44 25 00 91 0A 00 00 02 4F D1 00 00 37
                39 00 05 B8 26 22 20 03
                39 00 04 BF 02 11 00 
                39 00 0B B3 0C 10 0A 50 03 FF 00 00 00 00 
                39 00 0A C0 73 73 50 50 00 00 08 70 00 
                39 00 02 BC 46 
                39 00 02 CC 0B 
                39 00 02 B4 80 
                39 00 04 B2 C8 12 30
                39 00 0F E3 07 07 0B 0B 03 0B 00 00 00 00 FF 00 C0 10
                39 00 0D C1 53 00 1E 1E 77 C1 FF FF AF AF 7F 7F
                39 00 03 B5 07 07
                39 00 03 B6 70 70
                39 00 07 C6 00 00 FF FF 01 FF
                39 00 40 E9 C2 10 05 04 FE 02 81 12 31 45 3F 83 12 91 3B 2A 08 05 00 00 00 00 08 05 00 00 00 00 FF 02 46 02 48 68 88 88 88 80 88 FF 13 57 13 58 78 88 88 88 81 88 00 00 00 00 00 12 B1 3B 00 00 00 00 00 
                39 00 3E EA 00 1A 00 00 00 00 00 00 00 00 00 00 FF 31 75 31 18 78 88 88 88 85 88 FF 20 64 20 08 68 88 88 88 84 88 20 10 00 00 54 00 00 00 00 00 00 00 C0 00 00 0C 00 00 00 00 30 02 A1 00 00 00 00 
                39 00 23 E0 00 05 07 1A 39 3F 33 2C 06 0B 0D 11 13 12 14 10 1A 00 05 07 1A 39 3F 33 2C 06 0B 0D 11 13 12 14 10 1A
                05 ff 01 11
        05 78 01 29

        ];
        
        panel-exit-sequence = [
            05 00 01 28
            05 78 01 10
        ];

        disp_timings0: display-timings {
            native-mode = <&dsi0_timing0>;
            dsi0_timing0: timing0 {
                                clock-frequency = <60000000>;
                                hactive = <720>;
                                vactive = <1280>;
                                hback-porch = <42>;
                                hfront-porch = <44>;
                                vback-porch = <10>;
                                vfront-porch = <14>;
                                hsync-len = <2>;
                                vsync-len = <2>;
                                hsync-active = <0>;
                                vsync-active = <0>;
                                de-active = <0>;
                                pixelclk-active = <0>;

            };
        };

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                panel_in_dsi: endpoint {
                    remote-endpoint = <&dsi_out_panel>;
                };
            };
        };
    };

    ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port@1 {
            reg = <1>;
            dsi_out_panel: endpoint {
                remote-endpoint = <&panel_in_dsi>;
            };
        };
    };

};



&dsi0_in_vp0 {
    status = "disabled";
};

&dsi0_in_vp1 {
    status = "okay";
};


&video_phy0 {
    status = "okay";
};


&route_dsi0 {
    status = "okay";
    connect = <&vp1_out_dsi0>;
};



&gt1x {
    status = "okay";
    compatible = "goodix,gt1x";
    reg = <0x5d>;

    /**
     * goodix,rst-gpio = <>;
     * goodix,irq-gpio = <>;
     *
     * touch panel interrupt and reset pin
     * please refer to ***-lcd-gpio.dtsi
     * that included in main dts.
     */

};