// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Rockchip Electronics Co., Ltd. * */ /dts-v1/; //rk3568-evb1-ddr4-v10 //#include "rk3568-evb1-ddr4-v10.dtsi" #include "rk3568-evb-rpdzkj-rk809-pwm.dtsi" #include "../rk3568-linux.dtsi" /*************************camera***********************/ #include "rp-mipi-camera-gc2093-rk3568.dtsi" /***************************************************/ /*************************adc key***********************/ #include "rp-adc-key.dtsi" /***************************************************/ /*************************gmac***********************/ #include "rp-gmac0-pro-rk3568.dtsi" #include "rp-gmac1-m1-pro-rk3568.dtsi" /***************************************************/ /***************** SINGLE LCD (LCD + HDMI) ****************/ #include "rp-box-rk3568-lcd-gpio.dtsi" // if use lcd, must enable it /* HDMI only */ //#include "rp-lcd-hdmi.dtsi" /* MIPI DSI0 */ //#include "rp-lcd-mipi0-5-720-1280-v2-boxTP.dtsi" //#include "rp-lcd-mipi0-7-720-1280.dtsi" //#include "rp-lcd-mipi0-8-800-1280-v3.dtsi" //#include "rp-lcd-mipi0-8-1200-1920.dtsi" //#include "rp-lcd-mipi0-10-800-1280-v3.dtsi" //#include "rp-lcd-mipi0-10-1200-1920.dtsi" #include "rp-lcd-mipi1-10-1920-1200.dtsi" /** LVDS */ //#include "rp-lcd-lvds-10-1024-600-raw.dtsi" //#include "rp-lcd-lvds-7-1024-600-v2.dtsi" //#include "rp-lcd-lvds-10-1280-800.dtsi" /* EDP */ //#include "rp-lcd-edp-13.3-15.6-1920-1080.dtsi" /************************ MULTILPLE LCD *********************/ /* EDP + MIPI0/lvds */ //#include "rp-lcd-triple-lvds-10-1024-600-edp-13-1920-1080-hdmi.dtsi" /{ model = "rp-box-rk3568"; compatible = "rpdzkj,rp-box-rk3568", "rockchip,rk3568"; fan_gpio_control { compatible = "fan_gpio_control"; gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; thermal-zone = "soc-thermal"; threshold-temp = <60000>; //60C running-time = <10000>; //10s status = "okay"; }; rp_power{ status = "okay"; compatible = "rp_power"; rp_not_deep_sleep = <1>; //#define GPIO_FUNCTION_OUTPUT 0 //#define GPIO_FUNCTION_INPUT 1 //#define GPIO_FUNCTION_IRQ 2 //#define GPIO_FUNCTION_FLASH 3 //#define GPIO_FUNCTION_OUTPUT_CTRL 4 /** * gpioxxx { // the node name will display on /proc/rp_power, you can define any character string * gpio_num = <>; // gpio you want ot control * gpio_function = <>; // function of current gpio, refer to above define. * }; */ pwr_5v_3v3 { //vdd5v vdd3v3 en gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; gpio_function = <0>; }; pwr_4g { //vdd_3G 3.3v enable gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; led { //system led gpio_num = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; gpio_function = <3>; }; usb_pwr { //usb power gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; hub_rst { //hub reset gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; otg_mode { //OTG SWITCH, high is mean otg_id to 0, force host mode gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; gpio_function = <4>; }; otg_power { //usb otg power gpio_num = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; spk_en { //spk enable gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; gpio_function = <4>; }; spk_mute { //spk mute gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; gpio_function = <4>; }; }; rp_gpio{ status = "okay"; compatible = "rp_gpio"; /** * gpioxxx { // the node name will display on /proc/rp_gpio, you can define any character string * gpio_num = <>; // gpio you want ot control * gpio_function = <>; // function of current gpio£º 0 output, 1 input, 3 blink * gpio_event = ; // optional property used to define gpio report event such as KEY_F14, only works in case of gpio_function = <1>; * }; */ /****** GPIO, place you want to control as below * gpio_name { * gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; * gpio_function = <4>; * }; */ }; fiq-debugger { compatible = "rockchip,fiq-debugger"; rockchip,serial-id = <2>; rockchip,wake-irq = <0>; /* If enable uart uses irq instead of fiq */ rockchip,irq-mode-enable = <1>; rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; }; &pmu_io_domains { status = "okay"; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; }; &gmac0 { status = "okay"; tx_delay = <0x3a>; rx_delay = <0x2e>; snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; //max-speed = <100>; /* set eth maximal speed, default automatically adapt */ }; &gmac1 { status = "okay"; tx_delay = <0x42>; rx_delay = <0x27>; snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; }; &i2c1 { status = "okay"; }; &i2c3 { status = "okay"; }; &i2c5 { status = "okay"; rtc@51 { status = "okay"; compatible = "rtc,hym8563"; reg = <0x51>; }; }; &uart0 { status = "okay"; }; &uart3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart3m1_xfer>; }; &uart4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart4m1_xfer>; }; &uart7 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart7m1_xfer>; }; &uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>; }; &uart9 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart9m1_xfer>; }; &spi0 { status = "okay"; spi0_dev@0 { compatible = "rockchip,spidev"; reg = <0>; spi-max-frequency = <12000000>; spi-lsb-first; }; }; &spi1 { status = "disabled"; }; /******** must be close,if not system no run ******/ &dmc { status = "disabled"; }; &dfi { status = "disabled"; }; /*********************************************/ &pwm7 { status = "disabled"; }; /*************************wifi bt***********************/ &wireless_wlan { pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; }; &wireless_bluetooth { BT,reset_gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; BT,wake_gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; BT,wake_host_irq = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; status = "okay"; }; /******************************************************/ &rk_headset { pinctrl-names = "default"; pinctrl-0 = <&hp_det>; headset_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; }; /****** rp3568 camera configuration adjustment ******/ &vcc_camera { pinctrl-0 = <&camera_pwr>; gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; }; &gc2093 { pwdn-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; }; &edp { /** delete hdp gpio that rp-box-rk3568 donot use */ /delete-property/ hpd-gpios; }; &pinctrl { wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; wireless-bluetooth { uart8_gpios: uart8-gpios { rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; headphone { hp_det: hp-det { rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; cam { camera_pwr: camera-pwr { rockchip,pins = /* camera power en */ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; rp_pin { otg_5ven: otg-5ven { rockchip,pins = /* otg port host power en */ <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; host_5ven: host-5ven { rockchip,pins = /* usb host power en */ <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; vdd3g_en: vdd3g-en { rockchip,pins = /* 4G module power en */ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &rk809_sound { /delete-property/ simple-audio-card,hp-det-gpio; /delete-property/ simple-audio-card,widgets; };