// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
 */

/dts-v1/;
#include <dt-bindings/gpio/nca9555-gpio.h>
#include "../rk3326.dtsi"
#include "../rk3326-linux.dtsi"
#include "rk3326-evb-rpdzkj-rk817.dtsi"
#include "rp-rk3326s-board.dtsi"

/* audio */
#include "rp-audio-rk817.dtsi"

/* usb */
#include "rp-usb-rk3326.dtsi"

/* adc key */
#include "rp-adc-key.dtsi"

/* wifi/bt */
#include "rp-wifi-bt-ap6256-rk3326.dtsi"

/* mipi camera */
#include "rp-mipi-camera-rk3326.dtsi"


/***************** SINGLE LCD ****************/
/* MIPI DSI */
//#include "rp-lcd-mipi-5-720-1280-v2-boxTP.dtsi"
//#include "rp-lcd-mipi-5.5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi-5.5-1080-1920.dtsi"
#include "rp-lcd-mipi-7-1024-600.dtsi"
//#include "rp-lcd-mipi-7-720-1280.dtsi"
//#include "rp-lcd-mipi-7-1200-1920.dtsi"
//#include "rp-lcd-mipi-8-800-1280-v3.dtsi"
//#include "rp-lcd-mipi-8-1200-1920.dtsi"
//#include "rp-lcd-mipi-10-800-1280-v3.dtsi"
//#include "rp-lcd-mipi-10-1200-1920.dtsi"
//#include "rp-lcd-mipi-10-1920-1200.dtsi"

/* LVDS */
//#include "rp-lcd-lvds-7-1024-600.dtsi"
//#include "rp-lcd-lvds-10-1280-800.dtsi"

/* RGB */
//#include "rp-lcd-rgb-7-1024-600.dtsi"

/ {
	model = "rp-rk3326s";
	compatible = "rpdzkj,rp-rk3326s-v10", "rockchip,rk3326";
	
	vdd_3v3_5v_control: vdd_3v3_5v_control {
                compatible = "regulator-fixed";
                regulator-name = "vdd_3v3_5v_control";
        	regulator-always-on;
                regulator-boot-on;
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
                enable-active-high;
		gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;    //In the uboot phase fixed.c resolves gpio
                gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vdd_control>;
        };

	fiq-debugger {
                 compatible = "rockchip,fiq-debugger";
                 rockchip,serial-id = <2>;
                 rockchip,wake-irq = <0>;
                 /* If enable uart uses irq instead of fiq */
                 rockchip,irq-mode-enable = <1>;
                 rockchip,baudrate = <115200>;  /* Only 115200 and 1500000 */
                 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
                 pinctrl-names = "default";
                 pinctrl-0 = <&uart2m1_xfer>;
                 status = "okay";
        };


	rp_power{
                status = "okay";
                compatible = "rp_power";
                rp_not_deep_sleep = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&led_set>;

        //#define GPIO_FUNCTION_OUTPUT 0
        //#define GPIO_FUNCTION_INPUT 1
        //#define GPIO_FUNCTION_IRQ 2
        //#define GPIO_FUNCTION_FLASH 3
        //#define GPIO_FUNCTION_OUTPUT_CTRL 4

		led {    //system led
                        gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
                        gpio_function = <3>;
                };
		
                usb_otg_switch {
			gpio_num = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

                usb_channel_switch {
			gpio_num = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

                usb_pwr {   
                        gpio_num = <&nca9555_gpio IO_03 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

		vdd_4g {
                        gpio_num = <&nca9555_gpio IO_01 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };


                spk_en {       //spk enable
                        gpio_num = <&nca9555_gpio IO_04 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

		vcc_1v2_camera {
                        gpio_num = <&nca9555_gpio IO_02 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

	};
	
	
	rp_gpio{
                status = "okay";
                compatible = "rp_gpio";

                gpio1b7 {
                        gpio_num = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

		nca9555_05 {
                        gpio_num = <&nca9555_gpio IO_05 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_06 {
                        gpio_num = <&nca9555_gpio IO_06 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_07 {
                        gpio_num = <&nca9555_gpio IO_07 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

		nca9555_10 {
                        gpio_num = <&nca9555_gpio IO_10 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_11 {
                        gpio_num = <&nca9555_gpio IO_11 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_12 {
                        gpio_num = <&nca9555_gpio IO_12 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_13 {
                        gpio_num = <&nca9555_gpio IO_13 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_14 {
                        gpio_num = <&nca9555_gpio IO_14 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_15 {
                        gpio_num = <&nca9555_gpio IO_15 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

		nca9555_16 {
                        gpio_num = <&nca9555_gpio IO_16 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

                nca9555_17 {
                        gpio_num = <&nca9555_gpio IO_17 GPIO_ACTIVE_HIGH>;
                        gpio_function = <0>;
                };

        };
};

&i2c0 {
    status = "okay";

    hym8563: hym8563@51 {
        compatible = "haoyu,hym8563";
        reg = <0x51>;
        #clock-cells = <0>;
        clock-frequency = <32768>;
        clock-output-names = "hym8563";
        //pinctrl-names = "default";
        //pinctrl-0 = <&hym8563_int>;
        //interrupt-parent = <&gpio0>;
        //interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
        //wakeup-source;
    };

};

&i2c1 {
    status = "okay";
	
	nca9555: mfd-gpio@20 {
                compatible = "nca9555";
                reg = <0x20>;
                status = "okay";

                nca9555_gpio: gpio-normal@20 {
                        compatible = "nca9555-gpio";
                        gpio-controller;
                        #gpio-cells = <2>;
                };
        };

};

&uart0 {
        status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_xfer>;
};

&sdmmc {
	pinctrl-names = "default";
  	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
	status = "okay";
};

&pinctrl {
    rp_power_set {
	led_set: led-set{
		rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
	};
    };
    power_control{
        vdd_control: vdd_control {
            rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
        };
    };
};