更改gmac配置

rk356x/rp-gmac0-pro-rk3568.dtsi

@@ -1,30 +1,30 @@
 
 &gmac0 {
-    phy-mode = "rgmii";
-    clock_in_out = "input";
+        phy-mode = "rgmii";
+        clock_in_out = "input";
+        snps,reset-gpio = <&gpio2 RK_PC5 GPIO_ACTIVE_LOW>;
+        snps,reset-active-low;
+        /* Reset time is 20ms, 100ms for rtl8211f */
+        snps,reset-delays-us = <0 20000 100000>;
 
-    snps,reset-gpio = <&gpio2 RK_PC5 GPIO_ACTIVE_LOW>;
-    snps,reset-active-low;
-    /* Reset time is 20ms, 100ms for rtl8211f */
-    snps,reset-delays-us = <0 20000 100000>;
+        assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+        assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>;
+        assigned-clock-rates = <0>, <125000000>;
 
-    assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>, <&cru CLK_MAC0_OUT>;
-    assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>, <&cru CLK_MAC0_2TOP>;
-    assigned-clock-rates = <0>, <125000000>, <25000000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&gmac0_miim
+                    &gmac0_tx_bus2
+                    &gmac0_rx_bus2
+                    &gmac0_rgmii_clk_level2
+                    &gmac0_rgmii_bus
+                    &gmac0_clkinout>;
 
-    pinctrl-names = "default";
-    pinctrl-0 = <&gmac0_miim
-             &gmac0_tx_bus2
-             &gmac0_rx_bus2
-             &gmac0_rgmii_clk
-             &gmac0_rgmii_bus
-            &eth0_pins
-            &gmac0_clkinout>;
 
-    tx_delay = <0x2d>;
-    rx_delay = <0x2c>;
-    phy-handle = <&rgmii_phy0>;
-    status = "okay";
+        tx_delay = <0x3c>;
+        rx_delay = <0x2f>;
+
+        phy-handle = <&rgmii_phy0>;
+        status = "okay";
 };
 
 
@@ -32,6 +32,5 @@
     rgmii_phy0: phy@0 {
         compatible = "ethernet-phy-ieee802.3-c22";
         reg = <0x0>;
-        clocks = <&cru CLK_MAC0_OUT>;
     };
 };