pcie 网卡插槽

rk3588/.dr4-rk3588.dtb.cmd

@@ -32,11 +32,13 @@ deps_arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb := \
   scripts/dtc/include-prefixes/dt-bindings/sensor-dev.h \
   arch/arm64/boot/dts/rockchip/rk3588/../rk3588-rk806-single.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/../rk3588-linux.dtsi \
+  arch/arm64/boot/dts/rockchip/rk3588/rp-tp-i2c6-gt911.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rpdzkj_config.dtsi \
-  arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi \
+  arch/arm64/boot/dts/rockchip/rk3588/zkzg-usb-host.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac0.dtsi \
   arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi \
-  arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi \
+  arch/arm64/boot/dts/rockchip/rk3588/zkzg-pcie.dtsi \
+  arch/arm64/boot/dts/rockchip/rk3588/rp-lcd-hdmi1.dtsi \
 
 arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb: $(deps_arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dtb)
 

rk3588/.dr4-rk3588.dtb.d.pre.tmp

@@ -28,8 +28,10 @@ dr4-rk3588.o: arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts \
  scripts/dtc/include-prefixes/dt-bindings/sensor-dev.h \
  arch/arm64/boot/dts/rockchip/rk3588/../rk3588-rk806-single.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/../rk3588-linux.dtsi \
+ arch/arm64/boot/dts/rockchip/rk3588/rp-tp-i2c6-gt911.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/rpdzkj_config.dtsi \
- arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi \
+ arch/arm64/boot/dts/rockchip/rk3588/zkzg-usb-host.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac0.dtsi \
  arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi \
- arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi
+ arch/arm64/boot/dts/rockchip/rk3588/zkzg-pcie.dtsi \
+ arch/arm64/boot/dts/rockchip/rk3588/rp-lcd-hdmi1.dtsi

rk3588/.dr4-rk3588.dtb.dts.tmp

@@ -14517,7 +14517,20 @@
 /delete-node/ &backlight;
 # 4 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-tp-i2c6-gt911.dtsi" 1
 
+&i2c6 {
+    status = "okay";
+    pinctrl-names = "default";
+  pinctrl-0 = <&i2c6m0_xfer>;
+
+  goodix_ts:goodix_ts@5d {
+        status = "okay";
+        compatible = "goodix,gt9xx";
+        reg = <0x5d>;
+  };
+};
+# 6 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 
 
 # 1 "arch/arm64/boot/dts/rockchip/rk3588/rpdzkj_config.dtsi" 1
@@ -14545,20 +14558,8 @@
 
 
 
-# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-usb-host.dtsi" 1
-
-&u2phy2 {
-    status = "okay";
-};
-
-&u2phy3 {
-    status = "okay";
-};
-
-
-
-
 
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/zkzg-usb-host.dtsi" 1
 &u2phy2_host {
     status = "okay";
 };
@@ -14567,6 +14568,7 @@
     status = "okay";
 };
 
+
 &usb_host0_ehci {
     status = "okay";
 };
@@ -14582,18 +14584,7 @@
 &usb_host1_ohci {
     status = "okay";
 };
-
+# 14 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
-
-
-
-&usbhost3_0 {
-    status = "disabled";
-};
-
-&usbhost_dwc3_0 {
-    status = "disabled";
-};
-# 13 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 
 
 
@@ -14622,8 +14613,8 @@
              &gmac0_rx_bus2
              &gmac0_rgmii_clk
              &gmac0_rgmii_bus
-             &gmac0_clkinout
+            &gmac0_clkinout
-             &eth0_pins>;
+            &eth0_pins>;
 
     tx_delay = <0x44>;
 
@@ -14631,7 +14622,7 @@
     phy-handle = <&rgmii_phy0>;
     status = "okay";
 };
-# 17 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 18 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 # 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-eth-gmac1.dtsi" 1
 
 &mdio1 {
@@ -14667,47 +14658,105 @@
     phy-handle = <&rgmii_phy1>;
     status = "okay";
 };
-# 18 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 19 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
 
 
-# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-pcie-power-rk3588.dtsi" 1
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/zkzg-pcie.dtsi" 1
-
 / {
-        pcie20_avdd0v85: pcie20-avdd0v85 {
+    vcc3v3_pcie30: vcc3v3-pcie30 {
-                compatible = "regulator-fixed";
+        compatible = "regulator-fixed";
-                regulator-name = "pcie20_avdd0v85";
+        regulator-name = "vcc3v3_pcie30";
-                regulator-boot-on;
+        regulator-min-microvolt = <3300000>;
-                regulator-always-on;
+        regulator-max-microvolt = <3300000>;
-                regulator-min-microvolt = <850000>;
+        enable-active-high;
-                regulator-max-microvolt = <850000>;
+        gpios = <&gpio3 19 0>;
-                vin-supply = <&vdd_0v85_s0>;
+        startup-delay-us = <5000>;
-        };
+        vin-supply = <&vcc12v_dcin>;
-
+    };
-        pcie20_avdd1v8: pcie20-avdd1v8 {
-                compatible = "regulator-fixed";
-                regulator-name = "pcie20_avdd1v8";
-                regulator-boot-on;
-                regulator-always-on;
-                regulator-min-microvolt = <1800000>;
-                regulator-max-microvolt = <1800000>;
-                vin-supply = <&avcc_1v8_s0>;
-        };
-
-        vcc3v3_pcie30: vcc3v3-pcie30 {
-                compatible = "regulator-fixed";
-                regulator-name = "vcc3v3_pcie30";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-                enable-active-high;
-                gpios = <&gpio4 5 0>;
-                startup-delay-us = <5000>;
-                vin-supply = <&vcc12v_dcin>;
-        };
-
-
 };
-# 21 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+
-# 90 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+&combphy0_ps {
+    status = "okay";
+};
+
+&combphy1_ps {
+    status = "okay";
+};
+
+&combphy2_psu {
+    status = "okay";
+};
+
+&pcie2x1l0 {
+    phys = <&combphy1_ps 2>;
+    reset-gpios = <&gpio4 5 0>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie2x1l1 {
+    phys = <&combphy2_psu 2>;
+    reset-gpios = <&gpio4 2 0>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie2x1l2 {
+    reset-gpios = <&gpio4 17 0>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie30phy {
+    rockchip,pcie30-phymode = <0>;
+    status = "okay";
+};
+
+&pcie3x2 {
+    reset-gpios = <&gpio4 8 0>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "okay";
+};
+
+&pcie3x4 {
+    num-lanes = <2>;
+    reset-gpios = <&gpio4 14 0>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "okay";
+};
+# 22 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 68 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+# 1 "arch/arm64/boot/dts/rockchip/rk3588/rp-lcd-hdmi1.dtsi" 1
+&hdmi1 {
+    status = "okay";
+    pinctrl-names = "default";
+    pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim2_tx1_scl &hdmim2_tx1_sda>;
+};
+
+&hdmi1_in_vp1 {
+    status = "okay";
+};
+
+&hdmi1_sound {
+    status = "okay";
+};
+
+&i2s6_8ch {
+        status = "okay";
+};
+
+
+&hdptxphy_hdmi1 {
+    status = "okay";
+};
+
+
+&route_hdmi1 {
+        status = "okay";
+        connect = <&vp1_out_hdmi1>;
+};
+# 69 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts" 2
+# 94 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
 / {
     model = "dr4-rk3588";
 
@@ -14736,67 +14785,109 @@
             thermal-zone = "soc-thermal";
             threshold-temp = <60000>;
             running-time = <10000>;
-            status = "disable";
+            status = "disabled";
         };
 
         rp_power{
                 status = "okay";
                 compatible = "rp_power";
                 rp_not_deep_sleep = <1>;
-# 142 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+# 146 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
                 usb-host-power {
                         gpio_num = <&gpio2 17 0>;
                         gpio_function = <4>;
                 };
 
-
+                usb-hub-reset {
-
+                        gpio_num = <&gpio3 10 0>;
-
+                        gpio_function = <4>;
-
+                };
     };
-# 162 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+
+        rp_gpio{
+                status = "okay";
+                compatible = "rp_gpio";
+
+                gpio3c7 {
+                        gpio_num = <&gpio3 23 0>;
+                        gpio_function = <0>;
+                };
+        };
+};
+
+
+&uart0 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart0m0_xfer>;
+};
+
+&uart1 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart1m1_xfer>;
+};
+
+&uart3 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart3m0_xfer>;
+};
+
+&uart4 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart4m1_xfer>;
+};
+
+&uart5 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart5m0_xfer>;
+};
+
+&uart6 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart6m2_xfer>;
 };
 
 &uart7 {
- status = "okay";
+    status = "disabled";
- pinctrl-names = "default";
+    pinctrl-names = "default";
- pinctrl-0 = <&uart7m1_xfer>;
+    pinctrl-0 = <&uart7m1_xfer>;
- fifo-depth =<4096>;
- rx-fifo-depth =<2048>;
- tx-fifo-depth =<2048>;
- dma-names = "tx", "rx";
 };
 
 &uart8 {
- status = "okay";
+    status = "disabled";
- pinctrl-names = "default";
+    pinctrl-names = "default";
- pinctrl-0 = <&uart8m0_xfer>;
+    pinctrl-0 = <&uart8m0_xfer>;
- fifo-depth =<4096>;
- rx-fifo-depth =<2048>;
- tx-fifo-depth =<2048>;
- dma-names = "tx", "rx";
 };
 
+&uart9 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart9m2_xfer>;
+};
 
 &can0 {
- assigned-clocks = <&cru 112>;
+    assigned-clocks = <&cru 112>;
- assigned-clock-rates = <200000000>;
+    assigned-clock-rates = <200000000>;
- status = "okay";
+    status = "disabled";
- pinctrl-names = "default";
+    pinctrl-names = "default";
- pinctrl-0 = <&can0m0_pins>;
+    pinctrl-0 = <&can0m0_pins>;
-
 };
 
 &can1 {
- assigned-clocks = <&cru 114>;
+    assigned-clocks = <&cru 114>;
- assigned-clock-rates = <200000000>;
+    assigned-clock-rates = <200000000>;
- status = "okay";
+    status = "disabled";
- pinctrl-names = "default";
+    pinctrl-names = "default";
- pinctrl-0 = <&can1m1_pins>;
+    pinctrl-0 = <&can1m1_pins>;
 };
-# 225 "arch/arm64/boot/dts/rockchip/rk3588/dr4-rk3588.dts"
+
 &i2c4 {
-    status = "disable";
+    status = "disabled";
     pinctrl-names = "default";
     pinctrl-0 = <&i2c4m1_xfer>;
 
@@ -14817,9 +14908,22 @@
 
 
 &sdmmc {
-    status = "disabled";
+    status = "okay";
 };
 
 &fiq_debugger {
     rockchip,baudrate = <115200>;
 };
+
+&display_subsystem {
+clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
+clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
+};
+
+&hdptxphy_hdmi_clk0 {
+            status = "okay";
+};
+
+&hdptxphy_hdmi_clk1 {
+            status = "okay";
+};

rk3588/dr4-rk3588.dts

@@ -2,14 +2,15 @@
 //#include "../rk3588-evb4-lp4-v10-linux.dts"
 #include "rp-rk3588-board.dtsi"
 
-// #include "rp-tp-i2c6-gt911.dtsi"
+#include "rp-tp-i2c6-gt911.dtsi"
 // #include "rd-rk3588-lcd-gpio.dtsi"
 
 #include "rpdzkj_config.dtsi"
 
 /* usb */
 // #include "rp-usb-typec-rk3588.dtsi"
-#include "rp-usb-host.dtsi"
+// #include "rp-usb-host.dtsi"
+#include "zkzg-usb-host.dtsi"
 
 /* ethernet */
 // #include "rp-eth-pcie2gmac-rk3588.dtsi"
@@ -17,7 +18,10 @@
 #include "rp-eth-gmac1.dtsi"
 
 /* pcie */
-#include "rp-pcie-power-rk3588.dtsi"
+#include "zkzg-pcie.dtsi" 
+
+/* pcie */
+// #include "rp-pcie-power-rk3588.dtsi"
 // #include "rp-pcie3.dtsi" //need comment when use board of  make it youself,and remove the pcie function
 // #include "rp-pcie-5g.dtsi"
 
@@ -60,8 +64,8 @@
 //#include "rp-camera-dphy0-imx415.dtsi"
 /******************************************/
 
-//#include "rp-lcd-hdmi0.dtsi"        //batch ignore
+// #include "rp-lcd-hdmi0.dtsi"        //batch ignore
-//#include "rp-lcd-hdmi1.dtsi"        //batch ignore
+#include "rp-lcd-hdmi1.dtsi"        //batch ignore
 //#include "rp-lcd-typec-dp0.dtsi"    //usb edp0, must be enable rp-usb-typec.dtsi, batch ignore 
 // #include "rp-lcd-multi-hdmi0-hdmi1-dp0.dtsi"
 
@@ -115,7 +119,7 @@
             thermal-zone = "soc-thermal";
             threshold-temp = <60000>; //60C
             running-time = <10000>; //10s
-            status = "disable";
+            status = "disabled";
         };
 
         rp_power{
@@ -144,86 +148,96 @@
                         gpio_function = <4>;
                 };
 
-                // usb-hub-reset {
+                usb-hub-reset {
-                //         gpio_num = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+                        gpio_num = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
-                //         gpio_function = <4>;
+                        gpio_function = <4>;
-                // };
+                };
     };
 
-        // rp_gpio{
+        rp_gpio{
-        //         status = "okay";
+                status = "okay";
-        //         compatible = "rp_gpio";
+                compatible = "rp_gpio";
 
-        //         gpio3c7 {
+                gpio3c7 {
-        //                 gpio_num = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+                        gpio_num = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
-        //                 gpio_function = <0>;
+                        gpio_function = <0>;
-        //         };
+                };
-        // };
+        };
+};
+
+
+&uart0 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart0m0_xfer>;
+};
+
+&uart1 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart1m1_xfer>;
+};
+
+&uart3 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart3m0_xfer>;
+};
+
+&uart4 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart4m1_xfer>;
+};
+
+&uart5 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart5m0_xfer>;
+};
+
+&uart6 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart6m2_xfer>;
 };
 
 &uart7 {
-	status = "okay";
+    status = "disabled";
-	pinctrl-names = "default";
+    pinctrl-names = "default";
-	pinctrl-0 = <&uart7m1_xfer>;
+    pinctrl-0 = <&uart7m1_xfer>;
-	fifo-depth =<4096>;	
-	rx-fifo-depth =<2048>;
-	tx-fifo-depth =<2048>;
-	dma-names = "tx", "rx";
 };
 
 &uart8 {
-	status = "okay";
+    status = "disabled";
-	pinctrl-names = "default";
+    pinctrl-names = "default";
-	pinctrl-0 = <&uart8m0_xfer>;
+    pinctrl-0 = <&uart8m0_xfer>;
-	fifo-depth =<4096>;	
-	rx-fifo-depth =<2048>;
-	tx-fifo-depth =<2048>;
-	dma-names = "tx", "rx";
 };
 
+&uart9 {
+    status = "disabled";
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart9m2_xfer>;
+};
 
 &can0 {
-	assigned-clocks = <&cru CLK_CAN0>;
+    assigned-clocks = <&cru CLK_CAN0>;
-	assigned-clock-rates = <200000000>;
+    assigned-clock-rates = <200000000>;
-	status = "okay";
+    status = "disabled";
-	pinctrl-names = "default";
+    pinctrl-names = "default";
-	pinctrl-0 = <&can0m0_pins>;
+    pinctrl-0 = <&can0m0_pins>;
-	
 };
 
 &can1 {
-	assigned-clocks = <&cru CLK_CAN1>;
+    assigned-clocks = <&cru CLK_CAN1>;
-	assigned-clock-rates = <200000000>;
+    assigned-clock-rates = <200000000>;
-	status = "okay";
+    status = "disabled";
-	pinctrl-names = "default";
+    pinctrl-names = "default";
-	pinctrl-0 = <&can1m1_pins>;
+    pinctrl-0 = <&can1m1_pins>;
 };
 
-// &can2 {
-// 	assigned-clocks = <&cru CLK_CAN2>;
-// 	assigned-clock-rates = <200000000>;
-// 	status = "okay";
-// 	pinctrl-names = "default";
-// 	pinctrl-0 = <&can2m1_pins>;
-// }; 
-
-// &spi3 {
-//         // status = "disabled";
-//         status = "okay";
-//         max-freq = <48000000>;
-//         dev-port = <1>;
-//         pinctrl-0 = <&spi3m1_cs1 &spi3m1_pins>;
-//         spidev0: spidev@00 {
-//             status = "okay";
-//             compatible = "rockchip,spidev";
-//             reg = <0x00>;
-//             spi-max-frequency = <48000000>;
-//         };
-// };
-
-
 &i2c4 {
-    status = "disable";
+    status = "disabled";
     pinctrl-names = "default";
     pinctrl-0 = <&i2c4m1_xfer>;
 
@@ -244,22 +258,22 @@
 
 
 &sdmmc {
-    status = "disabled";
+    status = "okay";
 };
 
 &fiq_debugger {
     rockchip,baudrate = <115200>;
 };
 
-// &display_subsystem {
+&display_subsystem {
-// clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
+clocks = <&hdptxphy_hdmi_clk0>, <&hdptxphy_hdmi_clk1>;
-// clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
+clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
-// };
+};
 
-// &hdptxphy_hdmi_clk0 {
+&hdptxphy_hdmi_clk0 {
-//             status = "okay";
+            status = "okay";
-// };
+};
 
-// &hdptxphy_hdmi_clk1 {
+&hdptxphy_hdmi_clk1 {
-//             status = "okay";
+            status = "okay";
-// };
+};

rk3588/rp-eth-gmac0.dtsi

@@ -22,8 +22,8 @@
              &gmac0_rx_bus2
              &gmac0_rgmii_clk
              &gmac0_rgmii_bus
-             &gmac0_clkinout
+            &gmac0_clkinout
-             &eth0_pins>;
+            &eth0_pins>;
 
     tx_delay = <0x44>;
     // rx_delay = <0x4f>; 

rk3588/rp-usb-host.dtsi

@@ -43,6 +43,6 @@
 };
 
 &usbhost_dwc3_0 {
-    status = "disabled";
+    status = "okay";
 };
 

rk3588/rp-usb-typec-rk3588.dtsi

@@ -11,6 +11,20 @@
                 pinctrl-names = "default";
                 pinctrl-0 = <&typec5v_pwren>;
         };
+
+        vcc5v0_host: vcc5v0-host {
+            compatible = "regulator-fixed";
+            regulator-name = "vcc5v0_host";
+            regulator-boot-on;
+            regulator-always-on;
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <5000000>;
+            enable-active-high;
+            gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&vcc5v0_usb>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&vcc5v0_host_en>;
+        };
 };
 
 
@@ -111,7 +125,7 @@
 
 
 &usbdrd_dwc3_0 {
-    dr_mode = "otg";
+    dr_mode = "host";
     usb-role-switch;
     port {
         #address-cells = <1>;
@@ -123,6 +137,24 @@
     };
 };
 
+&u2phy1_otg {
+    phy-supply = <&vcc5v0_host>;
+};
+
+// 使能USB3.1/SATA/PCIe Combo PHY
+&combphy2_psu {
+    status = "okay";
+};
+// 配置USB3.1 HOST2 Controller
+&usbhost3_0 {
+    status = "okay";
+};
+
+&usbhost_dwc3_0 {
+    dr_mode = "host";
+    status = "okay";
+};
+
 &pinctrl {
         usb-typec {
                 usbc0_int: usbc0-int {
@@ -134,4 +166,9 @@
                 };
  
        };
+       	usb {
+            vcc5v0_host_en: vcc5v0-host-en {
+                rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };

rk3588/zkzg-pcie.dtsi

@@ -0,0 +1,62 @@
+/ {
+    vcc3v3_pcie30: vcc3v3-pcie30 {
+        compatible = "regulator-fixed";
+        regulator-name = "vcc3v3_pcie30";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        enable-active-high;
+        gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+        startup-delay-us = <5000>;
+        vin-supply = <&vcc12v_dcin>;
+    };
+};
+
+&combphy0_ps {
+    status = "okay";
+};
+
+&combphy1_ps {
+    status = "okay";
+};
+
+&combphy2_psu {
+    status = "okay";
+};
+
+&pcie2x1l0 {
+    phys = <&combphy1_ps PHY_TYPE_PCIE>;
+    reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie2x1l1 {
+    phys = <&combphy2_psu PHY_TYPE_PCIE>;
+    reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie2x1l2 {
+    reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "disabled";
+};
+
+&pcie30phy {
+    rockchip,pcie30-phymode = <PHY_MODE_PCIE_NANBNB>;
+    status = "okay";
+};
+
+&pcie3x2 {
+    reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "okay";
+};
+
+&pcie3x4 {
+    num-lanes = <2>;
+    reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_pcie30>;
+    status = "okay";
+};

rk3588/zkzg-usb-host.dtsi

@@ -0,0 +1,24 @@
+&u2phy2_host {
+    status = "okay";
+};
+
+&u2phy3_host {
+    status = "okay";
+};
+
+// USB2.0 HOST0/1 Controller
+&usb_host0_ehci {
+    status = "okay";
+};
+
+&usb_host0_ohci {
+    status = "okay";
+};
+
+&usb_host1_ehci {
+    status = "okay";
+};
+
+&usb_host1_ohci {
+    status = "okay";
+};