From 6ccbccafaed9a7d38b2e925c4a385f83f0016856 Mon Sep 17 00:00:00 2001 From: zhangpeng Date: Thu, 23 Oct 2025 10:27:56 +0800 Subject: [PATCH] =?UTF-8?q?=E6=9B=B4=E6=94=B9gmac=E9=85=8D=E7=BD=AE?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- rk356x/rp-gmac0-pro-rk3568.dtsi | 612 ++------------------------------ 1 file changed, 25 insertions(+), 587 deletions(-) diff --git a/rk356x/rp-gmac0-pro-rk3568.dtsi b/rk356x/rp-gmac0-pro-rk3568.dtsi index dc509ee..2cc1990 100755 --- a/rk356x/rp-gmac0-pro-rk3568.dtsi +++ b/rk356x/rp-gmac0-pro-rk3568.dtsi @@ -1,598 +1,36 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * - */ - -/dts-v1/; -//rk3568-evb1-ddr4-v10 -//#include "rk3568-evb1-ddr4-v10.dtsi" -#include "rk3566-evb-rpdzkj-rk809-tcs4525.dtsi" -#include "../rk3568-linux.dtsi" +&gmac0 { + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio2 RK_PC5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; -/**************************pcie***********************/ -#include "zkzg-pcie-rk3568.dtsi" + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>; + assigned-clock-rates = <0>, <125000000>; -/*************************camera***********************/ -// #include "rp-camera-mipi-gc2093-single-2lane.dtsi" -/***************************************************/ + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk_level2 + &gmac0_rgmii_bus + &gmac0_clkinout>; -/*************************adc key***********************/ -// #include "rp-adc-key.dtsi" -/***************************************************/ + tx_delay = <0x3c>; + rx_delay = <0x2f>; -/*************************gmac***********************/ -// #include "rp-gmac1-m1-pro-rk3568.dtsi" -#include "rp-gmac0-pro-rk3568.dtsi" -/***************************************************/ - -/*************************CAN**********************/ -// #include "rp-can0-m0-rk3568.dtsi" -// #include "rp-can1-m1-rk3568.dtsi" -// #include "rp-can2-m0-rk3568.dtsi" -#include "zkzg-can-rk3568.dtsi" -/**************************************************/ - -/*********************PCIE**************************/ -// #include "rk3568-pcie2x1.dtsi" -// #include "rk3568-pcie3x2.dtsi" -/***************************************************/ - -/*************************SATA***********************/ -// #include "rk3568-sata1.dtsi" -/***************************************************/ - - - -// #include "lcd-gpio-dr4-rk3568.dtsi" //gpio config for lcd - -/****** LCD config reference **/ -/** single HDMI */ -//#include "rp-lcd-hdmi.dtsi" - -/** mipi0 +hdmi */ -//#include "rp-lcd-mipi0-5-720-1280-v2-boxTP.dtsi" -//#include "rp-lcd-mipi0-7-720-1280.dtsi" -//#include "rp-lcd-mipi0-8-800-1280-v3.dtsi" -//#include "rp-lcd-mipi0-8-1200-1920.dtsi" -//#include "rp-lcd-mipi0-10-800-1280-v3.dtsi" -//#include "rp-lcd-mipi0-10-1200-1920.dtsi" - -/** MIPI2LVDS + HDMI */ -//#include "rp-lcd-mipi0tolvds-gm8775c-10-1024-600-raw.dtsi" -//#include "rp-lcd-mipi0tolvds-gm8775c-1920-1080.dtsi" - -/** LVDS + HDMI */ -//#include "rp-lcd-lvds-7-1024-600-v2.dtsi" -// #include "rp-lcd-lvds-10-1280-800-v2.dtsi" -//#include "rp-lcd-lvds-10-1280-800.dtsi" - -/** EDP + HDMI */ -//#include "rp-lcd-edp-13-1920-1080.dtsi" -//#include "rp-lcd-edp-13.3-15.6-1920-1080.dtsi" - -/** LVDS + eDP + HDMI */ -//#include "rp-lcd-triple-lvds-7-1024-600-edp-13-1920-1080-hdmi.dtsi" - - - - -/{ - model = "dr4-rk3568"; - compatible = "rpdzkj,dr4-rk3568", "rockchip,rk3568"; - - fan_gpio_control { - compatible = "fan_gpio_control"; - gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; - thermal-zone = "soc-thermal"; - threshold-temp = <60000>; //60C - running-time = <10000>; //10s - status = "disabled"; - }; - - rp_power{ - status = "okay"; - compatible = "rp_power"; - rp_not_deep_sleep = <1>; - - pinctrl-name = "default"; - pinctrl-0 = <&rp_power>; - - //#define GPIO_FUNCTION_OUTPUT 0 - //#define GPIO_FUNCTION_INPUT 1 - //#define GPIO_FUNCTION_IRQ 2 - //#define GPIO_FUNCTION_FLASH 3 - //#define GPIO_FUNCTION_OUTPUT_CTRL 4 - - /** - * gpioxxx { // the node name will display on /proc/rp_power, you can define any character string - * gpio_num = <>; // gpio you want ot control - * gpio_function = <>; // function of current gpio, refer to above define. - * }; - */ - - // led { //system led - // gpio_num = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; - // gpio_function = <3>; - // }; - //fan { //fan - // gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - //}; - - otg_mode { //OTG SWITCH, high is mean otg_id to 0, force host mode - gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - otg_power { //usb otg power - gpio_num = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - gpio_function = <4>; - }; - - // hub_rst { //usb hub - // gpio_num = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // usb_pwr0 { //host0 power en - // gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // usb_pwr1 { //host1 power en - // gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // usb_pwr2 { //host2 power en - // gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // usb_pwr3 { //host3 power en - // gpio_num = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // usb_pwr4 { //host4 power en - // gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - - // spk_en { //spk enable - // gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - // spk_mute { //spk mute - // gpio_num = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; - // gpio_function = <4>; - // }; - - // vdd_3g { //4G module power en - // gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; - // gpio_function = <4>; - // }; - - }; - - rp_gpio{ - status = "disabled"; - compatible = "rp_gpio"; - - /** - * gpioxxx { // the node name will display on /proc/rp_gpio, you can define any character string - * gpio_num = <>; // gpio you want ot control - * gpio_function = <>; // function of current gpio： 0 output, 1 input, 3 blink - * gpio_event = ; // optional property used to define gpio report event such as KEY_F14, only works incase of gpio_function = <1>; - * }; - */ - gpio0a0 { - gpio_num = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3c1 { - gpio_num = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio4c4 { - gpio_num = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio0c2 { - gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio2d2 { - gpio_num = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio2b2 { - gpio_num = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d0 { - gpio_num = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d1 { - gpio_num = <&gpio0 RK_PD1 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d2 { - gpio_num = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d3 { - gpio_num = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d4 { - gpio_num = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - gpio3d5 { - gpio_num = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; - gpio_function = <0>; - }; - - }; - - fiq-debugger { - compatible = "rockchip,fiq-debugger"; - rockchip,serial-id = <2>; - rockchip,wake-irq = <0>; - /* If enable uart uses irq instead of fiq */ - rockchip,irq-mode-enable = <1>; - rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */ - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; - }; - -}; - - -&pmu_io_domains { + phy-handle = <&rgmii_phy0>; status = "okay"; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - vccio7-supply = <&vcc_3v3>; -}; - -&i2c3 { - status = "disabled"; }; -&i2c5 { - status = "disabled"; - rtc@51 { - status = "okay"; - compatible = "rtc,hym8563"; - reg = <0x51>; - }; -}; - -&uart3 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3m1_xfer>; -}; - -&uart4 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart4m0_xfer>; -}; - -&uart5 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart5m0_xfer>; -}; - - -&uart6 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart6m1_xfer>; -}; - -&uart7 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart7m1_xfer>; -}; - -&uart8 { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&uart8m0_xfer>; -}; - - -&spi0 { - status = "disabled"; - /** redefine pins for cs1 used to be pwm5 */ - pinctrl-0 = <&spi0m0_cs0 &spi0m0_pins>; - pinctrl-1 = <&spi0m0_cs0 &spi0m0_pins_hs>; - - spi_dev@0 { - compatible = "rockchip,spidev"; - reg = <0>; - spi-max-frequency = <12000000>; - spi-lsb-first; +&mdio0 { + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; }; -}; - -&spi1 { - status = "okay"; - /** redefine pins for cs1 used to be pwm5 */ - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins_hs>; - - spi_dev@0 { - compatible = "rockchip,spidev"; - reg = <0>; - spi-max-frequency = <12000000>; - spi-lsb-first; - }; -}; - -&video_phy1 { - status = "disabled"; -}; - -/******** must be close,if not system no run ******/ -&dmc { - status = "disabled"; -}; - -&dfi { - status = "disabled"; -}; - -/*********************************************/ - - - -&pwm7 { - /****** disable for gpio used to be spi0_cs0 */ - status = "disabled"; -}; - -/** LCD backlight - * By default, we all use backlight4 node whether it is mipi, lvds or edp, - * but when mipi1(2lvds) ports used, pwm need the pwm5, - * when edp port used, pwm need the pwm10, so fix backlight node. - * and if mutiple lcd used, we just use the backlight5, backlight10. - */ -/** LCD configuration */ -// #if defined(RP_SINGLE_LCD) - -// #if defined(RP_MIPI02LVDS) -// &dsi0_panel { -// enable-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_LOW>; //raw interface is inverse, so set to low -// }; -// #if defined(RP_DUALLVDS) -// // dual lvds donot need invert -// &backlight4 { -// pwms = <&pwm5 0 25000 0>; -// }; -// #else -// //pwm and enable pin may be inverted if use mipi to single lvds -// &backlight4 { -// pwms = <&pwm5 0 25000 1>; -// }; -// #endif - -// #elif defined(RP_EDP_USED) -// &backlight4 { -// pwms = <&pwm10 0 25000 0>; -// }; -// #endif - -// #else -// &edp_panel { -// backlight = <&backlight10>; -// }; -// #ifdef RP_MIPI02LVDS -// &dsi0_panel { -// backlight = <&backlight5>; -// }; -// #endif -// #endif - - -/** Ethernet config*/ -// &gmac1 { -// tx_delay = <0x49>; -// rx_delay = <0x29>; -// status = "okay"; -// }; - -// &gmac0 { -// tx_delay = <0x49>; -// rx_delay = <0x29>; -// status = "okay"; -// }; - - -/** headphone detect pin */ -&rk_headset { - pinctrl-0 = <&hp_det>; - headset_gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; -}; - - -/** wifi/bt config */ -&sdio_pwrseq { - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; -}; - -&sdmmc2 { - status = "disabled"; -}; - -&sdmmc1 { - status = "disabled"; - - max-frequency = <150000000>; - supports-sdio; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - sd-uhs-sdr104; - - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; -}; - -&wireless_wlan { - pinctrl-0 = <&wifi_host_wake_irq>; - WIFI,host_wake_irq = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; -}; - -&wireless_bluetooth { - uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&uart1m0_rtsn>; - pinctrl-1 = <&uart1_gpios>; - BT,reset_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - BT,wake_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - BT,wake_host_irq = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - status = "disabled"; -}; - - - -/** pcie2x1 */ -// &vcc3v3_pcie { -// /** -// * delete for gpio used to be bt_wake_host -// * and the vcc3v3_pcie need not control on our board. -// */ -// /delete-property/ gpio; -// }; - -// &pcie2x1 { -// status = "disabled"; - -// reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; -// }; - - - -/** pcie3x2 */ -// &pcie3x2 { -// status = "disabled"; -// reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; -// vpcie3v3-supply = <&vcc3v3_pcie3>; -// }; - -// &vcc3v3_pcie3 { -// pinctrl-names = "default"; -// pinctrl-0 = <&pcie3_3v3>; -// gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; - -// startup-delay-us = <8000>; //5000 is faild -// }; - -/** mipi camera config */ -// &vcc_camera { -// gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; -// pinctrl-names = "default"; -// pinctrl-0 = <&camera_en>; -// }; -// &gc2093 { -// pinctrl-names = "default"; -// pinctrl-0 = <&cif_clk>; -// pinctrl-1 = <&camera_ctl>; -// pwdn-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; -// reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; -// }; - - -&pinctrl { - rp_pins { - rp_power: rp-power { - rockchip,pins = - /* host4 power en */ - <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - headphone { //redefine hp detect pin - hp_det: hp-det { - rockchip,pins = - <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { //redefine sdio power pin - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - wireless-wlan { //redefine wlan wake host pin - wifi_host_wake_irq: wifi-host-wake-irq { - rockchip,pins = <2 RK_PC6 0 &pcfg_pull_down>; - }; - }; - wireless-bluetooth { - uart1_gpios: uart1-gpios { - rockchip,pins = <2 RK_PB5 0 &pcfg_pull_none>; - }; - }; - - vcc3v3-pcie3 { - pcie3_3v3: pcie3-3v3 { - rockchip,pins = - /** power supply enable pin */ - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - // camera-pins { - // camera_en: camera-en { - // rockchip,pins = - // /** gc2093 camera en */ - // <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - // }; - // camera_ctl: camera-ctl { - // rockchip,pins = - // /** gc2093 camera power down */ - // <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>, - // /** gc2093 camera reset */ - // <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - // }; - // }; -}; - - - -&wireless_bluetooth { - pinctrl-0 = <&uart1m0_rtsn>; - pinctrl-1 = <&uart1_gpios>; - BT,reset_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - BT,wake_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - BT,wake_host_irq = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - status = "disabled"; -}; +}; \ No newline at end of file