rockchip/rk3562/rp-lcd-mipi-10-800-1280-v3.dtsi

174 lines
4.8 KiB
Plaintext
Raw Normal View History

2025-04-28 03:36:59 +00:00
#define RP_SINGLE_LCD
&rpdzkj {
compatible = "rp_config";
user_version = "rpdzkj";
system_rotate = "90";
csi_camera_rotate = "0"; //all csi camera rotation //0 90 180 270 //no effect
csi_camera_facing = "0"; //0:auto 1:all front 2:all back //no effect
usb_camera_rotate = "0"; //all usb camera rotation //0 90 180 270
usb_camera_facing = "0"; //0:auto 1:all front 2:all back
lcd_density = "240";
language = "zh-CN"; //zh-CN //en-US
time_zone = "Asia/Shanghai"; //Asia/Shanghai = +8 //Europe/London = +1 //Africa/Casablanca = +0;
not_navigation_bar = "false";
not_status_bar = "false";
default_launcher = "true";
has_root = "true";
usb_not_permission = "true";
gps_use = "false";
gps_serial_port = "/dev/ttyS4";
primary_device = "DSI";
extend_device = "HDMI-A";
extend_rotate = "0";//0 0//1 90 //2 180 //3 270
rotation_efull = "false";
extend_rotate_2 = "0";//0 0//1 90 //2 180 //3 270
rotation_efull_2 = "true";
extend_rotate_3 = "0";//0 0//1 90 //2 180 //3 270
rotation_efull_3 = "true";
home_apk = "null";
status = "okay";
};
&dsi {
status = "okay";
//rockchip,lane-rate = <480>;
dsi_panel: panel@0 {
status = "okay";
compatible = "aoly,sl008pa21y1285-b00","simple-panel-dsi";
reg = <0>;
reset-delay-ms = <60>;
init-delay-ms = <60>;
enable-delay-ms = <60>;
prepare-delay-ms = <60>;
unprepare-delay-ms = <60>;
disable-delay-ms = <60>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
dsi,format = <MIPI_DSI_FMT_RGB888>;
dsi,lanes = <4>;
/**
* power-supply = <>;
* reset-gpios = <>;
*
* lcd reset pin and power supply
* please refer to ***-lcd-gpio.dtsi
* that included in main dts.
*/
panel-init-sequence = [
05 78 01 11 //sleep out
05 20 01 29 //display on
];
panel-exit-sequence = [
05 00 01 28
05 78 01 10
];
disp_timings0: display-timings {
native-mode = <&dsi_timing0>;
dsi_timing0: timing0 {
clock-frequency = <82000000>;
hactive = <800>;
vactive = <1280>;
hback-porch = <100>;
hfront-porch = <100>;
vback-porch = <30>;
vfront-porch = <20>;
hsync-len = <30>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
panel_in_dsi: endpoint {
remote-endpoint = <&dsi_out_panel>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out_panel: endpoint {
remote-endpoint = <&panel_in_dsi>;
};
};
};
};
&dsi_in_vp0 {
status = "okay";
};
&video_phy {
status = "okay";
};
&route_dsi {
status = "okay";
connect = <&vp0_out_dsi>;
};
&gt9xx {
status = "okay";
compatible = "goodix,gt9xx";
reg = <0x5d>;
gtp_resolution_x = <800>;
gtp_resolution_y = <1280>;
gtp_int_tarigger = <1>;
gtp_change_x2y = <0>;
gtp_overturn_x = <0>;
gtp_overturn_y = <0>;
gtp_send_cfg = <1>;
gtp_touch_wakeup = <1>;
/**
* goodix_rst_gpio = <>;
* goodix_irq_gpio = <>;
*
* touch panel interrupt and reset pin
* please refer to ***-lcd-gpio.dtsi
* that included in main dts.
*/
goodix,cfg-group2 = [
49 20 03 00 05 0A 35 00 01 06 23 08
37 2D 03 05 00 00 00 00 00 00 04 17
19 1D 14 90 30 AA 53 55 0C 08 00 00
00 01 03 1C 00 00 00 00 00 00 00 00
00 00 00 3C 78 94 D0 42 00 08 00 04
8E 40 00 85 4A 00 7F 55 00 7B 61 00
7A 70 00 7B 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 19 18 17 16 15 14 11 10
0F 0E 0D 0C 09 08 07 06 05 04 01 00
FF FF FF FF FF FF FF FF FF FF 00 02
04 06 07 08 0A 0C 0D 0E 0F 10 11 12
13 14 2A 29 28 27 26 25 24 23 22 21
20 1F 1E 1C 1B 19 FF FF FF FF FF FF
FF FF FF FF 24 01
];
};