rockchip/rk3588/rp-rk3588-board.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

/* merage dtsi in rk3588-evb4-lp4-v10-linux.dts */

#include "dt-bindings/usb/pd.h"
#include "../rk3588j.dtsi"
#include "../rk3588-evb.dtsi"
#include "../rk3588-rk806-single.dtsi"
#include "../rk3588-linux.dtsi"

/ {
    model = "Rockchip RK3588 EVB4 LP4 V10 Board";
    compatible = "rockchip,rk3588-evb4-lp4-v10", "rockchip,rk3588";
};

&rkcif {
  status = "okay";
};

&rkcif_mmu {
  status = "okay";
};

&wdt {
  status = "okay";
};

&dsi0 {
    status = "disabled";
    /delete-node/ panel@0;
    ports {
        /delete-node/ port@1;
    };
};

&dsi1 {
    status = "disabled";
    /delete-node/ panel@0;
    ports {
        /delete-node/ port@1;
    };
};

&i2c0 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&i2c0m2_xfer>;

    vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
        compatible = "rockchip,rk8602";
        reg = <0x42>;
        vin-supply = <&vcc5v0_sys>;
        vsel-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
        regulator-compatible = "rk860x-reg";
        regulator-name = "vdd_cpu_big0_s0";
        regulator-min-microvolt = <550000>;
        regulator-max-microvolt = <1050000>;
        regulator-ramp-delay = <2300>;
        rockchip,suspend-voltage-selector = <1>;
        regulator-boot-on;
        regulator-always-on;
        regulator-state-mem {
            regulator-off-in-suspend;
        };
    };

    vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
        compatible = "rockchip,rk8603";
        reg = <0x43>;
        vin-supply = <&vcc5v0_sys>;
        vsel-gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
        regulator-compatible = "rk860x-reg";
        regulator-name = "vdd_cpu_big1_s0";
        regulator-min-microvolt = <550000>;
        regulator-max-microvolt = <1050000>;
        regulator-ramp-delay = <2300>;
        rockchip,suspend-voltage-selector = <1>;
        regulator-boot-on;
        regulator-always-on;
        regulator-state-mem {
            regulator-off-in-suspend;
        };
    };
};

&i2c1 {
    status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&i2c1m2_xfer>;

    vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
        compatible = "rockchip,rk8602";
        reg = <0x42>;
        vin-supply = <&vcc5v0_sys>;
        vsel-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
        regulator-compatible = "rk860x-reg";
        regulator-name = "vdd_npu_s0";
        regulator-min-microvolt = <550000>;
        regulator-max-microvolt = <950000>;
        regulator-ramp-delay = <2300>;
        rockchip,suspend-voltage-selector = <1>;
        regulator-boot-on;
        regulator-always-on;
        regulator-state-mem {
            regulator-off-in-suspend;
        };
    };
};


&fiq_debugger {
    compatible = "rockchip,fiq-debugger";
    rockchip,serial-id = <2>;
    rockchip,wake-irq = <0>;
    /* If enable uart uses irq instead of fiq */
    rockchip,irq-mode-enable = <1>;
    rockchip,baudrate = <115200>;  /* Only 115200 and 1500000 */
    interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_LOW>;
    pinctrl-names = "default";
    pinctrl-0 = <&uart2m0_xfer>;
    status = "okay";
};


&sdmmc {
	max-frequency = <200000000>;
	no-sdio;
	no-mmc;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3_s0>;
	vqmmc-supply = <&vccio_sd_s0>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
	status = "okay";
};


/delete-node/ &backlight;