rockchip/rk356x/rp-lcd-mipi0tolvds-gm8775c-1920-1080.dtsi

158 lines
3.3 KiB
Plaintext
Raw Normal View History

2025-04-28 03:36:59 +00:00
#include "rp-lcd-hdmi.dtsi"
#define RP_SINGLE_LCD
#define RP_MIPI02LVDS
#define RP_DUALLVDS
&dsi0 {
status = "okay";
// rockchip,lane-rate = <480>;
dsi0_panel: panel@0 {
status = "okay";
compatible = "simple-panel-dsi";
reg = <0>;
init-delay-ms = <120>;
reset-delay-ms = <120>;
enable-delay-ms = <120>;
prepare-delay-ms = <120>;
unprepare-delay-ms = <60>;
disable-delay-ms = <60>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET)>;
dsi,format = <MIPI_DSI_FMT_RGB888>;
dsi,lanes = <4>;
/**
* power-supply = <>;
* reset-gpios = <>;
*
* lcd reset pin and power supply
* please refer to ***-lcd-gpio.dtsi
* that included in main dts.
*/
panel-init-sequence = [
23 08 02 27 AA
23 08 02 48 02
23 08 02 B6 20
23 08 02 01 80
23 08 02 02 38
23 08 02 03 47
23 08 02 04 50
23 08 02 05 12
23 08 02 06 50
23 08 02 07 00
23 08 02 08 18
23 08 02 09 04
23 08 02 0A 18
23 08 02 0B 82
23 08 02 0C 13
23 08 02 0D 01
23 08 02 0E 80
23 08 02 0F 20
23 08 02 10 20
23 08 02 11 03
23 08 02 12 1B
23 08 02 13 63
23 08 02 14 34
23 08 02 15 20
23 08 02 16 10
23 08 02 17 00
23 08 02 18 34
23 08 02 19 20
23 08 02 1A 10
23 08 02 1B 00
23 08 02 1E 46
23 08 02 51 30
23 08 02 1F 10
23 08 02 2A 01
05 78 01 11
05 05 01 29
];
panel-exit-sequence = [
05 00 01 28
05 78 01 10
];
disp_timings0: display-timings {
native-mode = <&dsi0_timing0>;
dsi0_timing0: timing0 {
clock-frequency = <130000000>;
hactive = <1920>;
vactive = <1080>;
hback-porch = <80>;
hfront-porch = <80>;
vback-porch = <24>;
vfront-porch = <24>;
hsync-len = <18>;
vsync-len = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
panel_in_dsi: endpoint {
remote-endpoint = <&dsi_out_panel>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out_panel: endpoint {
remote-endpoint = <&panel_in_dsi>;
};
};
};
};
&dsi0_in_vp0 {
status = "disabled";
};
&dsi0_in_vp1 {
status = "okay";
};
&video_phy0 {
status = "okay";
};
&route_dsi0 {
status = "okay";
connect = <&vp1_out_dsi0>;
};
//touch todo.