zhangpeng/rockchip
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
18c4f8007c
rockchip/rk356x/rp-box-rk3568.dts

377 lines
10 KiB
Plaintext
Raw Normal View History

rockchip
2025-04-28 03:36:59 +00:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
*
*/
/dts-v1/;
//rk3568-evb1-ddr4-v10
//#include "rk3568-evb1-ddr4-v10.dtsi"
#include "rk3568-evb-rpdzkj-rk809-pwm.dtsi"
#include "../rk3568-linux.dtsi"
/*************************camera***********************/
#include "rp-mipi-camera-gc2093-rk3568.dtsi"
/***************************************************/
/*************************adc key***********************/
#include "rp-adc-key.dtsi"
/***************************************************/
/*************************gmac***********************/
#include "rp-gmac0-pro-rk3568.dtsi"
#include "rp-gmac1-m1-pro-rk3568.dtsi"
/***************************************************/
/***************** SINGLE LCD (LCD + HDMI) ****************/
#include "rp-box-rk3568-lcd-gpio.dtsi" // if use lcd, must enable it
/* HDMI only */
//#include "rp-lcd-hdmi.dtsi"
/* MIPI DSI0 */
//#include "rp-lcd-mipi0-5-720-1280-v2-boxTP.dtsi"
//#include "rp-lcd-mipi0-7-720-1280.dtsi"
//#include "rp-lcd-mipi0-8-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-8-1200-1920.dtsi"
//#include "rp-lcd-mipi0-10-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-10-1200-1920.dtsi"
#include "rp-lcd-mipi1-10-1920-1200.dtsi"
/** LVDS */
//#include "rp-lcd-lvds-10-1024-600-raw.dtsi"
//#include "rp-lcd-lvds-7-1024-600-v2.dtsi"
//#include "rp-lcd-lvds-10-1280-800.dtsi"
/* EDP */
//#include "rp-lcd-edp-13.3-15.6-1920-1080.dtsi"
/************************ MULTILPLE LCD *********************/
/* EDP + MIPI0/lvds */
//#include "rp-lcd-triple-lvds-10-1024-600-edp-13-1920-1080-hdmi.dtsi"
/{
model = "rp-box-rk3568";
compatible = "rpdzkj,rp-box-rk3568", "rockchip,rk3568";
fan_gpio_control {
compatible = "fan_gpio_control";
gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
thermal-zone = "soc-thermal";
threshold-temp = <60000>; //60C
running-time = <10000>; //10s
status = "okay";
};
rp_power{
status = "okay";
compatible = "rp_power";
rp_not_deep_sleep = <1>;
//#define GPIO_FUNCTION_OUTPUT 0
//#define GPIO_FUNCTION_INPUT 1
//#define GPIO_FUNCTION_IRQ 2
//#define GPIO_FUNCTION_FLASH 3
//#define GPIO_FUNCTION_OUTPUT_CTRL 4
/**
* gpioxxx { // the node name will display on /proc/rp_power, you can define any character string
* gpio_num = <>; // gpio you want ot control
* gpio_function = <>; // function of current gpio, refer to above define.
* };
*/
pwr_5v_3v3 { //vdd5v vdd3v3 en
gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
gpio_function = <0>;
};
pwr_4g { //vdd_3G 3.3v enable
gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
led { //system led
gpio_num = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
gpio_function = <3>;
};
usb_pwr { //usb power
gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
hub_rst { //hub reset
gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
otg_mode { //OTG SWITCH, high is mean otg_id to 0, force host mode
gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
gpio_function = <4>;
};
otg_power { //usb otg power
gpio_num = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
spk_en { //spk enable
gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
spk_mute { //spk mute
gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
gpio_function = <4>;
};
};
rp_gpio{
status = "okay";
compatible = "rp_gpio";
/**
* gpioxxx { // the node name will display on /proc/rp_gpio, you can define any character string
* gpio_num = <>; // gpio you want ot control
* gpio_function = <>; // function of current gpio<69><6F> 0 output, 1 input, 3 blink
* gpio_event = <KEY_F14>; // optional property used to define gpio report event such as KEY_F14, only works in case of gpio_function = <1>;
* };
*/
/****** GPIO, place you want to control as below
* gpio_name {
* gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
* gpio_function = <4>;
* };
*/
};
fiq-debugger {
compatible = "rockchip,fiq-debugger";
rockchip,serial-id = <2>;
rockchip,wake-irq = <0>;
/* If enable uart uses irq instead of fiq */
rockchip,irq-mode-enable = <1>;
rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
};
&pmu_io_domains {
status = "okay";
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
};
&gmac0 {
status = "okay";
tx_delay = <0x3a>;
rx_delay = <0x2e>;
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
//max-speed = <100>; /* set eth maximal speed, default automatically adapt */
};
&gmac1 {
status = "okay";
tx_delay = <0x42>;
rx_delay = <0x27>;
snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
};
&i2c1 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c5 {
status = "okay";
rtc@51 {
status = "okay";
compatible = "rtc,hym8563";
reg = <0x51>;
};
};
&uart0 {
status = "okay";
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart3m1_xfer>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart4m1_xfer>;
};
&uart7 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart7m1_xfer>;
};
&uart8 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};
&uart9 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart9m1_xfer>;
};
&spi0 {
status = "okay";
spi0_dev@0 {
compatible = "rockchip,spidev";
reg = <0>;
spi-max-frequency = <12000000>;
spi-lsb-first;
};
};
&spi1 {
status = "disabled";
};
/******** must be close,if not system no run ******/
&dmc {
status = "disabled";
};
&dfi {
status = "disabled";
};
/*********************************************/
&pwm7 {
status = "disabled";
};
/*************************wifi bt***********************/
&wireless_wlan {
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_irq>;
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};
&wireless_bluetooth {
BT,reset_gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
/******************************************************/
&rk_headset {
pinctrl-names = "default";
pinctrl-0 = <&hp_det>;
headset_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
};
/****** rp3568 camera configuration adjustment ******/
&vcc_camera {
pinctrl-0 = <&camera_pwr>;
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
};
&gc2093 {
pwdn-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
};
&edp {
/** delete hdp gpio that rp-box-rk3568 donot use */
/delete-property/ hpd-gpios;
};
&pinctrl {
wireless-wlan {
wifi_host_wake_irq: wifi-host-wake-irq {
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-bluetooth {
uart8_gpios: uart8-gpios {
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
headphone {
hp_det: hp-det {
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
cam {
camera_pwr: camera-pwr {
rockchip,pins =
/* camera power en */
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rp_pin {
otg_5ven: otg-5ven {
rockchip,pins =
/* otg port host power en */
<2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
host_5ven: host-5ven {
rockchip,pins =
/* usb host power en */
<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vdd3g_en: vdd3g-en {
rockchip,pins =
/* 4G module power en */
<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&rk809_sound {
/delete-property/ simple-audio-card,hp-det-gpio;
/delete-property/ simple-audio-card,widgets;
};
Reference in New Issue Copy Permalink