rockchip/rk356x/pro-rk3568-ahd.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

//rk3568-evb1-ddr4-v10
//#include "rk3568-evb1-ddr4-v10.dtsi"

#include "rk3568-evb-rpdzkj-rk809-pwm.dtsi"


#include "../rk3568-linux.dtsi"

/*************************camera***********************/
#include "rp-mipi-camera-xs9922b-ahd.dtsi"
/***************************************************/


/*************************adc key***********************/
#include "rp-adc-key.dtsi"
/***************************************************/

/*************************gmac***********************/
#include "rp-gmac0-pro-rk3568.dtsi"
#include "rp-gmac1-m1-pro-rk3568.dtsi"
/***************************************************/

/*************************CAN**********************/
//#include "rp-can1-m1-rk3568.dtsi"
//#include "rp-can2-m0-rk3568.dtsi"
/**************************************************/


/*************************PCIE***********************/
#include "rk3568-pcie2x1.dtsi"
#include "rk3568-pcie3x2.dtsi"
/***************************************************/



/***************** SINGLE LCD (LCD + HDMI) ****************/
#include "pro-rk3568-ahd-single-lcd-gpio.dtsi"      // gpio config of lcd
/* HDMI */
//#include "rp-lcd-hdmi.dtsi"

/* MIPI DSI0 */
//#include "rp-lcd-mipi0-5-720-1280.dtsi"
//#include "rp-lcd-mipi0-5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi0-5-720-1280-v2-boxTP.dtsi"
//#include "rp-lcd-mipi0-5.5-720-1280.dtsi"
//#include "rp-lcd-mipi0-5.5-720-1280-v2.dtsi"
//#include "rp-lcd-mipi0-5.5-1080-1920.dtsi"
#include "rp-lcd-mipi0-7-1024-600.dtsi"
//#include "rp-lcd-mipi0-7-1200-1920.dtsi"
//#include "rp-lcd-mipi0-8-800-1280.dtsi"
//#include "rp-lcd-mipi0-8-800-1280-v2.dtsi"
//#include "rp-lcd-mipi0-8-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-8-1200-1920.dtsi"
//#include "rp-lcd-mipi0-10-800-1280.dtsi"
//#include "rp-lcd-mipi0-10-800-1280-v2.dtsi"
//#include "rp-lcd-mipi0-10-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-10-1920-1200.dtsi"

/* MIPI DSI1 to LVDS*/
//#include "rp-lcd-mipi1tolvds-gm8775c-10-1024-600-raw.dtsi"
//#include "rp-lcd-mipi1tolvds-gm8775c-1920-1080.dtsi"

/* EDP */
//#include "rp-lcd-edp-13.3-15.6-1920-1080.dtsi"




/{

    model = "pro-rk3568-ahd";
    compatible = "rpdzkj,pro-rk3568-v10", "rockchip,rk3568";


    fan_gpio_control {
            compatible = "fan_gpio_control";
            gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
            thermal-zone = "soc-thermal";
            threshold-temp = <60000>; //60C
            running-time = <10000>; //10s
            status = "okay";
        };

    
    vdd_5v_3v3: vdd_5v_3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vdd_5v_3v3";
                regulator-always-on;
                regulator-boot-on;
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
                enable-active-high;
                gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;  //注意驱动解析的是gpio还是gpios
                gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&vdd_5v_3v3_control>;
        };    
       
        rp_power{
                status = "okay";
                compatible = "rp_power";
                rp_not_deep_sleep = <1>;
                
                                pinctrl-names = "default";
                                pinctrl-0 = <&vcc5v0_host_en>;
                                pinctrl-1 = <&vcc5v0_otg_en>;

//#define GPIO_FUNCTION_OUTPUT 0
//#define GPIO_FUNCTION_INPUT 1
//#define GPIO_FUNCTION_IRQ 2
//#define GPIO_FUNCTION_FLASH 3
//#define GPIO_FUNCTION_OUTPUT_CTRL 4


                led 	{    //system led
                        gpio_num = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
                        gpio_function = <3>;
            	};
          //      fan {    //fan
          //              gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
          //              gpio_function = <4>;
          //    	  };
        		usb_pwr {       //usb  power
                        gpio_num = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
                hub_rst {    //usb hub
                        gpio_num = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
                        gpio_function = <4>;
            	};
    /*
                vdd_5v_3v3 {     
                        gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
        		};
    */
                otg_power {       //usb otg power
                        gpio_num = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
                spk_en {       //spk enable
                        gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
                spk_mute {       //spk mute
                        gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
                        gpio_function = <4>;
                };
        xs9922b_31_pwr {       //ahd power
                        gpio_num = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
                xs9922b_30_pwr {       //v10:need enable ahd_30 power ;Otherwise, this i2c cannot read other devices
                        gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };

                vdd_4G{
                        gpio_num = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
                gps_power{
                        gpio_num = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
                        gpio_function = <4>;
                };
        };

        rp_gpio{
                status = "okay";
                compatible = "rp_gpio";
        };

        fiq-debugger {
                compatible = "rockchip,fiq-debugger";
                rockchip,serial-id = <2>;
                rockchip,wake-irq = <0>;
                /* If enable uart uses irq instead of fiq */
                rockchip,irq-mode-enable = <1>;
                rockchip,baudrate = <115200>;  /* Only 115200 and 1500000 */
                interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&uart2m0_xfer>;
                status = "okay";
        };

};


&pmu_io_domains {
        status = "okay";
        pmuio2-supply = <&vcc3v3_pmu>;
        vccio1-supply = <&vccio_acodec>;
        vccio3-supply = <&vccio_sd>;
        vccio4-supply = <&vcc_1v8>;
        vccio5-supply = <&vcc_3v3>;
        vccio6-supply = <&vcc_1v8>;
        vccio7-supply = <&vcc_3v3>;
};



&pwm0 {
        status = "okay";
        pinctrl-names = "active";
};


&i2c1 {
    status = "okay";
};


&i2c3 {
    status = "okay";
};

&i2c4 {
    status = "okay";
};

&i2c5 {
    status = "okay";
        rtc@51 {
                status = "okay";
                compatible = "rtc,hym8563";
                reg = <0x51>;
        };
};


&uart0 {
    status = "okay";
};

&uart3 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&uart3m1_xfer>;
};

&uart4 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&uart4m1_xfer>;
};

/*open gps power*/
&uart5 {
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&uart5m1_xfer>;
};

&uart7 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&uart7m1_xfer>;
};

&uart8 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};

&uart9 {
    status = "okay";
    pinctrl-names = "default";
    pinctrl-0 = <&uart9m1_xfer>;
};


&spi0 {
    status = "okay";
    pinctrl-0 = <&spi0m0_cs0 &spi0m0_pins>;
      pinctrl-1 = <&spi0m0_cs0 &spi0m0_pins_hs>;

    spi0_dev@0 {
        compatible = "rockchip,spidev";
        reg = <0>;
        spi-max-frequency = <12000000>;
        spi-lsb-first;
    };
};


&can1 {
       assigned-clocks = <&cru CLK_CAN1>;
       assigned-clock-rates = <150000000>;
       pinctrl-names = "default";
       pinctrl-0 = <&can1m1_pins>;
       status = "okay";
};


&can2 {
        assigned-clocks = <&cru CLK_CAN2>;
        assigned-clock-rates = <150000000>;
        pinctrl-names = "default";
        pinctrl-0 = <&can2m0_pins>;
        status = "okay";
};

&video_phy1 {
    status = "okay";
};

/******** must be close,if not system no run ******/
&dmc {
       status = "disabled";
};

&dfi {
       status = "disabled";
};
/*********************************************/


&pwm7 {
    /****** disable for gpio used to be spi0_cs0 */
    status = "disabled";
};


/**
 * when single [mipi1 to lvds] ports used, pwm need the pwm5,
 * and if mutiple lcd used, we just reference the backlight5.
 */ 
#if defined(RP_MIPI12LVDS) && defined(RP_SINGLE_LCD)
&backlight4 {
    pwms = <&pwm5 0 25000 0>;
};
#endif

/** pcie2x1 */
&vcc3v3_pcie {
    gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
};

/** pcie3x2 */
&pcie3x2 {
    reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
    vpcie3v3-supply = <&vcc3v3_pcie3>;
};

&vcc3v3_pcie3 {
    pinctrl-names = "default";
    pinctrl-0 = <&pcie3_3v3>;
    gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;

    startup-delay-us = <8000>; //5000 is faild
};

/*************************wifi bt***********************/
&wireless_wlan {
    pinctrl-names = "default";
    pinctrl-0 = <&wifi_host_wake_irq>;
    WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};

&wireless_bluetooth {
    BT,reset_gpio    = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
    BT,wake_gpio     = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
    BT,wake_host_irq = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
    status = "okay";
};

/******************************************************/


&rk_headset {
    pinctrl-names = "default";
    pinctrl-0 = <&hp_det>;
    headset_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
};


&pinctrl {
    headphone {
        hp_det: hp-det {
            rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
        };
    };
    
    
    usb {
        vcc5v0_host_en: vcc5v0-host-en {
            rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
        };

        vcc5v0_otg_en: vcc5v0-otg-en {
            rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
        };
    };
    
    
    wireless-wlan {
        wifi_host_wake_irq: wifi-host-wake-irq {
            rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
        };
    };

    wireless-bluetooth {
        uart8_gpios: uart8-gpios {
            rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
        };
    };

    vcc3v3-pcie3 {
                pcie3_3v3: pcie3-3v3 {
                        rockchip,pins =
                        /** power supply enable pin */
                        <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
    
     vdd-5v-3v3 {
                vdd_5v_3v3_control: vdd-5v-3v3-control {
                        rockchip,pins =
                        /** power supply enable pin */
                        <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
};