zhangpeng/rockchip
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
master
rockchip/rk356x/dr4-rk3568.dts

581 lines
16 KiB
Plaintext
Raw Permalink Normal View History

rockchip
2025-04-28 03:36:59 +00:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
*
*/
/dts-v1/;
//rk3568-evb1-ddr4-v10
//#include "rk3568-evb1-ddr4-v10.dtsi"
#include "rk3568-evb-rpdzkj-rk809-pwm.dtsi"
#include "../rk3568-linux.dtsi"
/*************************camera***********************/
#include "rp-camera-mipi-gc2093-single-2lane.dtsi"
/***************************************************/
/*************************adc key***********************/
#include "rp-adc-key.dtsi"
/***************************************************/
/*************************gmac***********************/
#include "rp-gmac1-m1-pro-rk3568.dtsi"
/***************************************************/
/*************************CAN**********************/
#include "rp-can0-m0-rk3568.dtsi"
#include "rp-can1-m1-rk3568.dtsi"
#include "rp-can2-m0-rk3568.dtsi"
/**************************************************/
/*********************PCIE**************************/
#include "rk3568-pcie2x1.dtsi"
#include "rk3568-pcie3x2.dtsi"
/***************************************************/
/*************************SATA***********************/
#include "rk3568-sata1.dtsi"
/***************************************************/
#include "lcd-gpio-dr4-rk3568.dtsi" //gpio config for lcd
/****** LCD config reference **/
/** single HDMI */
//#include "rp-lcd-hdmi.dtsi"
/** mipi0 +hdmi */
//#include "rp-lcd-mipi0-5-720-1280-v2-boxTP.dtsi"
//#include "rp-lcd-mipi0-7-720-1280.dtsi"
//#include "rp-lcd-mipi0-8-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-8-1200-1920.dtsi"
//#include "rp-lcd-mipi0-10-800-1280-v3.dtsi"
//#include "rp-lcd-mipi0-10-1200-1920.dtsi"
/** MIPI2LVDS + HDMI */
//#include "rp-lcd-mipi0tolvds-gm8775c-10-1024-600-raw.dtsi"
//#include "rp-lcd-mipi0tolvds-gm8775c-1920-1080.dtsi"
/** LVDS + HDMI */
//#include "rp-lcd-lvds-7-1024-600-v2.dtsi"
#include "rp-lcd-lvds-10-1280-800-v2.dtsi"
//#include "rp-lcd-lvds-10-1280-800.dtsi"
/** EDP + HDMI */
//#include "rp-lcd-edp-13-1920-1080.dtsi"
//#include "rp-lcd-edp-13.3-15.6-1920-1080.dtsi"
/** LVDS + eDP + HDMI */
//#include "rp-lcd-triple-lvds-7-1024-600-edp-13-1920-1080-hdmi.dtsi"
/{
model = "dr4-rk3568";
compatible = "rpdzkj,dr4-rk3568", "rockchip,rk3568";
fan_gpio_control {
compatible = "fan_gpio_control";
gpio-pin = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
thermal-zone = "soc-thermal";
threshold-temp = <60000>; //60C
running-time = <10000>; //10s
status = "okay";
};
rp_power{
status = "okay";
compatible = "rp_power";
rp_not_deep_sleep = <1>;
pinctrl-name = "default";
pinctrl-0 = <&rp_power>;
//#define GPIO_FUNCTION_OUTPUT 0
//#define GPIO_FUNCTION_INPUT 1
//#define GPIO_FUNCTION_IRQ 2
//#define GPIO_FUNCTION_FLASH 3
//#define GPIO_FUNCTION_OUTPUT_CTRL 4
/**
* gpioxxx { // the node name will display on /proc/rp_power, you can define any character string
* gpio_num = <>; // gpio you want ot control
* gpio_function = <>; // function of current gpio, refer to above define.
* };
*/
led { //system led
gpio_num = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
gpio_function = <3>;
};
//fan { //fan
// gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
// gpio_function = <4>;
//};
otg_mode { //OTG SWITCH, high is mean otg_id to 0, force host mode
gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
otg_power { //usb otg power
gpio_num = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
hub_rst { //usb hub
gpio_num = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
usb_pwr0 { //host0 power en
gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
usb_pwr1 { //host1 power en
gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
usb_pwr2 { //host2 power en
gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
usb_pwr3 { //host3 power en
gpio_num = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
usb_pwr4 { //host4 power en
gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
spk_en { //spk enable
gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
spk_mute { //spk mute
gpio_num = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
gpio_function = <4>;
};
vdd_3g { //4G module power en
gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
gpio_function = <4>;
};
};
rp_gpio{
status = "okay";
compatible = "rp_gpio";
/**
* gpioxxx { // the node name will display on /proc/rp_gpio, you can define any character string
* gpio_num = <>; // gpio you want ot control
* gpio_function = <>; // function of current gpio： 0 output, 1 input, 3 blink
* gpio_event = <KEY_F14>; // optional property used to define gpio report event such as KEY_F14, only works incase of gpio_function = <1>;
* };
*/
gpio0a0 {
gpio_num = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3c1 {
gpio_num = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio4c4 {
gpio_num = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio0c2 {
gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio2d2 {
gpio_num = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio2b2 {
gpio_num = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d0 {
gpio_num = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d1 {
gpio_num = <&gpio0 RK_PD1 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d2 {
gpio_num = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d3 {
gpio_num = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d4 {
gpio_num = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
gpio3d5 {
gpio_num = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
gpio_function = <0>;
};
};
fiq-debugger {
compatible = "rockchip,fiq-debugger";
rockchip,serial-id = <2>;
rockchip,wake-irq = <0>;
/* If enable uart uses irq instead of fiq */
rockchip,irq-mode-enable = <1>;
rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
};
&pmu_io_domains {
status = "okay";
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
vccio7-supply = <&vcc_3v3>;
};
&i2c3 {
status = "okay";
};
&i2c5 {
status = "okay";
rtc@51 {
status = "okay";
compatible = "rtc,hym8563";
reg = <0x51>;
};
};
&uart0 {
status = "okay";
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart3m1_xfer>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart4m1_xfer>;
};
&uart5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart5m1_xfer>;
};
&uart7 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart7m1_xfer>;
};
&uart8 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart8m1_xfer>;
};
&uart9 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart9m1_xfer>;
};
&spi0 {
status = "okay";
/** redefine pins for cs1 used to be pwm5 */
pinctrl-0 = <&spi0m0_cs0 &spi0m0_pins>;
pinctrl-1 = <&spi0m0_cs0 &spi0m0_pins_hs>;
spi_dev@0 {
compatible = "rockchip,spidev";
reg = <0>;
spi-max-frequency = <12000000>;
spi-lsb-first;
};
};
&video_phy1 {
status = "okay";
};
/******** must be close,if not system no run ******/
&dmc {
status = "disabled";
};
&dfi {
status = "disabled";
};
/*********************************************/
&pwm7 {
/****** disable for gpio used to be spi0_cs0 */
status = "disabled";
};
/** LCD backlight
* By default, we all use backlight4 node whether it is mipi, lvds or edp,
* but when mipi1(2lvds) ports used, pwm need the pwm5,
* when edp port used, pwm need the pwm10, so fix backlight node.
* and if mutiple lcd used, we just use the backlight5, backlight10.
*/
/** LCD configuration */
#if defined(RP_SINGLE_LCD)
#if defined(RP_MIPI02LVDS)
&dsi0_panel {
enable-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_LOW>; //raw interface is inverse, so set to low
};
#if defined(RP_DUALLVDS)
// dual lvds donot need invert
&backlight4 {
pwms = <&pwm5 0 25000 0>;
};
#else
//pwm and enable pin may be inverted if use mipi to single lvds
&backlight4 {
pwms = <&pwm5 0 25000 1>;
};
#endif
#elif defined(RP_EDP_USED)
&backlight4 {
pwms = <&pwm10 0 25000 0>;
};
#endif
#else
&edp_panel {
backlight = <&backlight10>;
};
#ifdef RP_MIPI02LVDS
&dsi0_panel {
backlight = <&backlight5>;
};
#endif
#endif
/** Ethernet config*/
&gmac1 {
tx_delay = <0x49>;
rx_delay = <0x29>;
status = "okay";
};
/** headphone detect pin */
&rk_headset {
pinctrl-0 = <&hp_det>;
headset_gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
};
/** wifi/bt config */
&sdio_pwrseq {
pinctrl-0 = <&wifi_enable_h>;
reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
};
&sdmmc2 {
status = "disabled";
};
&sdmmc1 {
status = "okay";
max-frequency = <150000000>;
supports-sdio;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
sd-uhs-sdr104;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
};
&wireless_wlan {
pinctrl-0 = <&wifi_host_wake_irq>;
WIFI,host_wake_irq = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
};
&wireless_bluetooth {
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&uart1m0_rtsn>;
pinctrl-1 = <&uart1_gpios>;
BT,reset_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
};
/** pcie2x1 */
&vcc3v3_pcie {
/**
* delete for gpio used to be bt_wake_host
* and the vcc3v3_pcie need not control on our board.
*/
/delete-property/ gpio;
};
&pcie2x1 {
status = "okay";
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
};
/** pcie3x2 */
&pcie3x2 {
status = "okay";
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie3>;
};
&vcc3v3_pcie3 {
pinctrl-names = "default";
pinctrl-0 = <&pcie3_3v3>;
gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
startup-delay-us = <8000>; //5000 is faild
};
/** mipi camera config */
&vcc_camera {
gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&camera_en>;
};
&gc2093 {
pinctrl-names = "default";
pinctrl-0 = <&cif_clk>;
pinctrl-1 = <&camera_ctl>;
pwdn-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
};
&pinctrl {
rp_pins {
rp_power: rp-power {
rockchip,pins =
/* host4 power en */
<1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
headphone { //redefine hp detect pin
hp_det: hp-det {
rockchip,pins =
<2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
sdio-pwrseq { //redefine sdio power pin
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-wlan { //redefine wlan wake host pin
wifi_host_wake_irq: wifi-host-wake-irq {
rockchip,pins = <2 RK_PC6 0 &pcfg_pull_down>;
};
};
wireless-bluetooth {
uart1_gpios: uart1-gpios {
rockchip,pins = <2 RK_PB5 0 &pcfg_pull_none>;
};
};
vcc3v3-pcie3 {
pcie3_3v3: pcie3-3v3 {
rockchip,pins =
/** power supply enable pin */
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
camera-pins {
camera_en: camera-en {
rockchip,pins =
/** gc2093 camera en */
<2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
camera_ctl: camera-ctl {
rockchip,pins =
/** gc2093 camera power down */
<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
/** gc2093 camera reset */
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&wireless_bluetooth {
pinctrl-0 = <&uart1m0_rtsn>;
pinctrl-1 = <&uart1_gpios>;
BT,reset_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
Reference in New Issue Copy Permalink