rockchip/rk3326/rp-rk3326s-board.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
 */

#include <dt-bindings/display/drm_mipi_dsi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/sensor-dev.h>

/ {

	vccsys: vccsys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v8_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3800000>;
		regulator-max-microvolt = <3800000>;
	};
	
	vcc18_lcd_n: vcc18-lcd-n {
		compatible = "regulator-fixed";
		regulator-name = "vcc18_lcd_n";
		regulator-boot-on;
		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};
	
	rpdzkj:rpdzkj_config {
        compatible = "rp_config";
        user_version = "rpdzkj";
        system_rotate = "0";
        csi_camera_rotate = "0"; //all csi camera rotation //0 90 180 270 //no effect
        csi_camera_facing = "0"; //0:auto  1:all front   2:all back //no effect
        usb_camera_rotate = "0"; //all usb camera rotation //0 90 180 270 
        usb_camera_facing = "0"; //0:auto  1:all front   2:all back
        lcd_density = "160";
        language = "zh-CN";   //zh-CN //en-US
        time_zone = "Asia/Shanghai"; //Asia/Shanghai = +8   //Europe/London  = +1       //Africa/Casablanca     = +0;
        not_navigation_bar = "false";
        not_status_bar = "false";
        default_launcher = "true";
        has_root = "true";
        usb_not_permission = "true";
        gps_use = "false";
        gps_serial_port = "/dev/ttyS0";
        primary_device = "DSI";
        extend_device = "HDMI-A";
        extend_rotate = "0";//0 0//1 90 //2 180 //3 270
        rotation_efull = "true";
        extend_rotate_2 = "0";//0 0//1 90 //2 180 //3 270
        rotation_efull_2 = "true";
        extend_rotate_3 = "0";//0 0//1 90 //2 180 //3 270
        rotation_efull_3 = "true";
        home_apk = "null";
        status = "okay";
	};

};

&bus_apll {
	bus-supply = <&vdd_logic>;
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_arm>;
};

&display_subsystem {
	status = "okay";
};

&dfi {
	status = "okay";
};

&dmc {
	center-supply = <&vdd_logic>;
	status = "okay";
};

&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	no-sdio;
	no-sd;
	disable-wp;
	non-removable;
	num-slots = <1>;
	status = "okay";
};

&gpu {
	mali-supply = <&vdd_logic>;
	status = "okay";
};

&nandc0 {
	status = "okay";
};

&rk_rga {
	status = "okay";
};

&rockchip_suspend {
	status = "okay";
	rockchip,sleep-debug-en = <1>;
};

&saradc {
	status = "okay";
	vref-supply = <&vcc1v8_soc>;
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	no-sdio;
	no-mmc;
	card-detect-delay = <800>;
	ignore-pm-notify;
	/*cd-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; [> CD GPIO <]*/
	sd-uhs-sdr12;
	sd-uhs-sdr25;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	vqmmc-supply = <&vccio_sd>;
	vmmc-supply = <&vcc_sd>;
	status = "disabled";
};

&tsadc {
	pinctrl-names = "gpio", "otpout";
	pinctrl-0 = <&tsadc_otp_pin>;
	pinctrl-1 = <&tsadc_otp_out>;
	status = "okay";
};

&vopb {
	status = "okay";
};

&vopb_mmu {
	status = "okay";
};

&mpp_srv {
	status = "okay";
};

&vdpu {
	status = "okay";
};

&vepu {
	status = "okay";
};

&vpu_mmu {
	status = "okay";
};

&hevc {
	status = "okay";
};

&hevc_mmu {
	status = "okay";
};