AVT相机arm版本SDK

Vimba_6_0/VimbaGigETL/Documentation/ReleaseNotes.txt

@@ -0,0 +1,205 @@
+===========================================================================
+
+  Vimba GigE Transport Layer - Release Notes 
+  
+  Version: 1.9.0
+  Date:    October 2021
+===========================================================================
+
+--------------------------------
+Components and Version Reference  
+--------------------------------
+
+Vimba GenICam Transport Layer modules
+-----------------------------------
+  GigE Transport Layer (VimbaGigETL.cti)              1.9.0*
+
+Tools
+-----
+  Vimba Driver Installer (VimbaDriverInstaller.exe)   1.1.9
+  
+Windows Filter Driver
+------
+  Vimba GigE Filter Driver (psligvfilter.sys)         1.24.17  (except Windows 10)
+  Vimba GigE Filter Driver (VimbaGigEFilter.sys)      2.5.7*   (Windows 10 only)
+ 
+---------------------
+Hardware Requirements
+---------------------
+PC or laptop with 1 GHz 32-bit or 64-bit x86 processor or better.
+
+ARM board with ARMv7-compatible 32-bit processor (500 MHz or better).
+VFP3 support and Thumb extension are required. 
+
+ARMv8-compatible 64-bit embedded system, for example, Jetson Xavier.
+
+When using Allied Vision GigE cameras, a built-in Gigabit Ethernet network interface or 
+Gigabit Ethernet network card (one or more) is required.
+
+------------
+Installation
+------------            
+The Vimba GigE Transport Layer is part of the Vimba SDK. For instructions on how 
+to install this module, please refer to the Vimba User Manual.
+
+------------
+Known Issues
+------------
+- When experiencing trouble with image acquisition on Linux, try to increase the
+  priority of your application with "sudo -E nice -n -20 <command>".
+
+- A change of the available camera access modes cannot be reported for cameras
+  in different subnets or with misconfigured IP addresses. These cameras can
+  be accessed in configuration mode from different hosts simultaneously.
+
+- MSI Uninstallation by new Windows 10 dialog "Apps&Features" is not supported by now.
+  Please use the old "Programs and Features" dialog.
+
+GigE Filter Driver:
+  - Disabling the Vimba GigE Filter Driver while it is in use might lead to
+    unexpected behavior up to blue screen.
+  - Using other filter drivers additionally to Vimba's GigE Filter Driver may cause issues.
+
+---------------------------
+Changes and release history
+---------------------------
+
+Changes in version 1.9.0:
+-------------------------
+
+GigETL
+  - Changed behaviour of endianess handling (values must match host endianness in little-endian), 
+    for better compatibility with third-party software. 
+    Affected features that now have a changed byte order:
+      - Config Mode
+      - IP-related features including MulticastIPAddress
+      - Action Commands
+  - New feature DeviceUpdateTimeout (only applicable of GigE discovery is switched to Broadcast)
+  - New GVSPMaxLookBack default value (0 instead of 1) for improved packet resend handling
+  - Fixed: High memory usage during performance bottleneck (Nonpaged pool growing with multiple GigE cameras)
+  - Fixed: Action commands caused an error message in the console log
+  - Fixed: MulticastIPAdress range, better compatibility with third-party software
+
+GigE Filter Driver
+  - Reduced memory allocations
+  - Hidden statistics
+   
+
+
+Changes in version 1.8.2:
+-------------------------
+GigETL and GigE Filter Driver
+  - Fixed: Vimba Viewer did not show single frame acquisitions (5 GigE)
+  - Improved timeout handling (5 GigE)
+  - Fixed limitations of certain GVSPPacketSize values
+  - New GigETL feature: GVSPHostReceiveBufferSize (SO_RCVBUF,  usable with 
+    the socket driver only) replaces GVSPHostReceiveBuffers (which is still 
+    usable in existing applications).
+
+
+Changes in version 1.8.1:
+-------------------------
+  - Prepared for use with 5 GigE Vision cameras
+
+
+Changes in version 1.8.0:
+-------------------------
+  - Standard-compliant ForceIP features instead of Allied Vision custom features
+  - Prepared for use with extended IDs
+
+
+Changes in version 1.7.1:
+-------------------------
+  - Improved resend handling 
+  - By default, packet resends are enabled
+  - Other bug fixes
+
+Vimba Driver Installer
+  - Internal changes
+
+
+Changes in version 1.7.0:
+-------------------------
+- GenTL 1.5 support
+
+
+Changes in version 1.6.0:
+-------------------------
+- Fixed: GVSPPacketSize now updates as expected (Linux)
+- Other minor bug fixes
+
+Vimba GigE Filter Driver 
+  - Windows 10: Improved compatibility and performance with third-party filter drivers.
+
+Installer and driver
+   - New certificates for installer and driver (Windows 7, Windows 8, and Windows 8.1)
+
+
+Changes in version 1.5.0:
+-------------------------
+- Added functionality for Action Commands
+- Fixed sending packet request after invalid timeout on Linux
+- The parameter BUFFER_INFO_DELIVERED_IMAGEHEIGHT is filled correctly
+
+- VimbaGigEFilter (Windows 10 x64/x86 only):
+	- Fixed incompatibility with Intel 10 Gbit Ethernet cards (520/540/710)
+  - Changed buffer list handling, driver removes streaming packets from buffer list:
+     - Decreases system load formerly caused by stream packet duplication
+     - Prevents additional system load when firewall is enabled
+     - Does not allow Wireshark to see stream packets
+  - Packet resend system load minimized
+  - Fixed missing filterclass in driver inf
+  - Fixed double counting of received packets
+  - Fixed incompatibility with wireless network cards (removed binding to WAN)
+  - Fixed incompatibilities with VPN connections (filter now optional)
+
+
+Changes in version 1.4.4:
+-------------------------
+-Bug fixes
+
+Changes in version 1.4.2:
+-------------------------
+- Bug fixes
+
+Changes in version 1.4.1:
+-------------------------
+- Solved cases where network problems led to a lost camera
+- Fixed range of GevHeartbeatInterval and GevHeartbeatTimeout
+- Bug fixes for multi-camera usage and missing cleanup
+
+Changes in version 1.3.1:
+-------------------------
+- Support of GenICam GenTL standard 1.3
+- New GenTL SFNC feature categories BufferHandlingMode and StreamInformation
+- Separate features for heartbeat timeout and heartbeat interval
+- Adjustable device discovery waiting time
+- Fixed issues with alike serial numbers
+- Fixed issues with many network interfaces on Linux
+- Small bug-fixes to the Driver Installer
+
+Changes in version 1.2.0:
+-------------------------
+- Improved performance in case of many events
+- Restriction to eight cameras removed
+- Corrected Heartbeat feature
+- Fixed support for small packets
+
+Changes in version 1.1.0:
+-------------------------
+- Added feature DiscoveryBroadcastMode to the Interface module
+- Changed the documentation format to PDF
+- Slight changes for Linux compatibility
+
+
+-------------------------------------------------------
+Correlations with other Allied Vision Software Packages
+-------------------------------------------------------
+Please refer to the Vimba SDK Release Notes.
+
+
+----------------------------------------
+Allied Vision Technical Support
+----------------------------------------
+Contact us:
+https://www.alliedvision.com/contact