CMS3in1/2.Blade/4.MISC/温度检测/max31865/max31865.c

#include "max31865.h"

/***********************************************
<EFBFBD><EFBFBD><EFBFBD>÷<EFBFBD>ʽ<EFBFBD><EFBFBD>MAX31865_Init()
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><EFBFBD>
SDO   --->   PC10
CS    --->   PC12
SCLK  --->   PC9
SDI   --->   PC11
DRDY  --->   PC13
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD>MAX31865 <EFBFBD><EFBFBD>ʼ<EFBFBD><EFBFBD>,<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģ<EFBFBD><EFBFBD>
************************************************/
void MAX31865_Init(void)
{
	GPIO_InitTypeDef GPIO_InitStructure ;

	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOA,ENABLE);

	GPIO_InitStructure.GPIO_Pin = MAX31865_CS|MAX31865_SCLK|MAX31865_SDI;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(MAX31865_CONTROL_PORT,&GPIO_InitStructure);
	
	GPIO_InitStructure.GPIO_Pin = MAX31865_SDO|MAX31865_DRDY;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
	GPIO_Init(MAX31865_CONTROL_PORT,&GPIO_InitStructure);
	
	MAX31865_CS_SET;
	MAX31865_SCLK_SET;
}

/***********************************************
<EFBFBD><EFBFBD><EFBFBD>÷<EFBFBD>ʽ<EFBFBD><EFBFBD>MAX31865_Write()
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><EFBFBD>
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD>MAX31865 д<EFBFBD>Ĵ<EFBFBD><EFBFBD><EFBFBD>,addr:<EFBFBD>Ĵ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ַ,data:<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
************************************************/
void MAX31865_Write(unsigned char addr, unsigned char data)
{
		unsigned char i;
	
	MAX31865_CS_CLR;
	for(i=0;i<8;i++)  //д<><D0B4>ַ
	{
		MAX31865_SCLK_CLR;
		if(addr&0x80) MAX31865_SDI_SET;
		else MAX31865_SDI_CLR;
		MAX31865_SCLK_SET;
		addr<<=1;
	}
	for(i=0;i<8;i++)  //д<><D0B4><EFBFBD><EFBFBD>
	{
		MAX31865_SCLK_CLR;
		if(data&0x80) MAX31865_SDI_SET;
		else MAX31865_SDI_CLR;
		MAX31865_SCLK_SET;
		data<<=1;
	}
	MAX31865_CS_SET;
}
/***********************************************
<EFBFBD><EFBFBD><EFBFBD>÷<EFBFBD>ʽ<EFBFBD><EFBFBD>MAX31865_Read()
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><EFBFBD>  data
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD>MAX31865 <EFBFBD><EFBFBD><EFBFBD>Ĵ<EFBFBD><EFBFBD><EFBFBD> ,addr:<EFBFBD>Ĵ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ַ
************************************************/
unsigned char MAX31865_Read(unsigned char addr)
{
	unsigned char i;
	unsigned char data=0;
	
	MAX31865_CS_CLR;
	for(i=0;i<8;i++)  //д<><D0B4>ַ
	{
		MAX31865_SCLK_CLR;
		if(addr&0x80) MAX31865_SDI_SET;
		else MAX31865_SDI_CLR;
		MAX31865_SCLK_SET;
		addr<<=1;
	}
	for(i=0;i<8;i++)  //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
	{
		MAX31865_SCLK_CLR;
		data<<=1;		
		MAX31865_SCLK_SET;		
		if(MAX31865_SDO_READ) data|=0x01;
		else data|=0x00;
	}
	MAX31865_CS_SET;
	return data;
}
/***********************************************
<EFBFBD><EFBFBD><EFBFBD>÷<EFBFBD>ʽ<EFBFBD><EFBFBD>MAX31865_Cfg()
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><EFBFBD>  
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD>MAX31865 <EFBFBD><EFBFBD><EFBFBD><EFBFBD>
************************************************/
void MAX31865_Cfg(void)
{
	//BIAS ON,<2C>Զ<EFBFBD><D4B6><EFBFBD>4<EFBFBD>ߣ<EFBFBD>50HZ  <20><><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><C4BC>޸<EFBFBD><DEB8><EFBFBD><EFBFBD>߻<EFBFBD><DFBB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
	MAX31865_Write(0x80, 0xC3); 
}
/***********************************************
<EFBFBD><EFBFBD><EFBFBD>÷<EFBFBD>ʽ<EFBFBD><EFBFBD>MAX31865_GetTemp()
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֵ<EFBFBD><EFBFBD>  
<EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD><EFBFBD><EFBFBD>MAX31865 <EFBFBD><EFBFBD>ȡ<EFBFBD>¶<EFBFBD>
************************************************/
float MAX31865_GetTemp(void)
{ 
	unsigned int data;
	float Rt;
	float Rt0 = 100;  //PT100	
	float Z1,Z2,Z3,Z4,temp;
	float a = 3.9083e-3;
	float b = -5.775e-7;
	float rpoly;
//	MAX31865_Write(0x80, 0xD3);
	data=MAX31865_Read(0x01)<<8;
	data|=MAX31865_Read(0x02);
	data>>=1;  //ȥ<><C8A5>Faultλ
	Rt=(float)data/32768.0*RREF;
	Z1 = -a;
  Z2 = a*a-4*b;
  Z3 = 4*b/Rt0;
  Z4 = 2*b;
  temp = Z2+Z3*Rt;
  temp = (sqrt(temp)+Z1)/Z4;
  if(temp>=0){
		return temp;
	}
  rpoly = Rt;
  temp = -242.02;
  temp += 2.2228 * rpoly;
  rpoly *= Rt;  // square
  temp += 2.5859e-3 * rpoly;
  rpoly *= Rt;  // ^3
  temp -= 4.8260e-6 * rpoly;
  rpoly *= Rt;  // ^4
  temp -= 2.8183e-8 * rpoly;
  rpoly *= Rt;  // ^5
  temp += 1.5243e-10 * rpoly;

  return temp;
}